694537
30
Zoom out
Zoom in
Previous page
1/40
Next page
30
Error code Cause Solution
02F
Tempera-
ture of the
circuit board
is too high
1. Turn off the fireplace for approximately 30 minutes.
2. Then turn on the fireplace.
3. In case the error reappears, there is insufficient
ventilation in the chamber of the fireplace.
04F
No mains
voltage
supply
(two-way
switch only)
Supply mains voltage.
06F
or
flashing
No com-
munication
between
remote
control and
fireplace
In case the light on the automatic burner relay
in the technical unit) does not flash:
1. Check power supply on the mains (230VAC).
2. If this is correct, check/replace the VDC transformer
and/or automatic burner relay.
In case the light on the automatic burner relay
(in the technical unit) flashes:
1. Place the remote control as close to the fireplace as
possible.
2. Briefly press
and wait approximately 60 seconds.
3. Check the transmission strength. See: Checking
transmission strength page 17. Carry out the
following steps to check the transmission strength
between the fireplace and the remote control.
4. Check for objects that could jam the signal
(for instance metal casings).
5. In case the signal keeps flashing -> synchronise.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalfire GP70-55S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalfire GP70-55S in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalfire GP70-55S

Kalfire GP70-55S User Manual - German - 44 pages

Kalfire GP70-55S User Manual - Dutch - 41 pages

Kalfire GP70-55S User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info