694535
29
Zoom out
Zoom in
Previous page
1/40
Next page
29
5.2.2 Error codes iMatch remote control
Error code Cause Solution
Entire
display
flashing
Flat battery Replacing battery.
Low battery Replacing battery.
NOLK 0 in
the middle
of the
display
Bedienings-
fout
Druk kort op >NOLK< zal nu linksboven in het display
verschijnen.
NOLK
linksboven
in het
display
No com-
munication
between
remote
control and
fireplace
(for example
in case of a
new remote
control)
Synchronising remote control:
1. Open the hatch of the technical unit and carefully
remove the automatic burner relay so it is easily
accessible.
2. Remove the batteries from the remote control and
press (hereby discharging the remote control). Next,
replace the batteries into the remote control.
3. Isolate the automatic burner relay from power for
20 seconds, this will stimulate the synchronisation
speed. Supply power back to the cable. The entire
light will start flashing (once per second). Should
the gas fire is provided with a hybrid function and/
or NSG: detach the HCB cable from the automatic
burner relay.
4. Press
on the remote control until >NOLK 0<
appears on the display.
Next, release
.
5. In case >NOLK 1< or >LINK 1< appear, press
again until
>NOLK 0< appears.
6. Press the black button in the automatic burner relay
until the yellow light continuously stops flashing, then
immediately release the black button. The yellow light
will start flashing rapidly now.
7. Immediately (within 10 seconds) press
and hold
it down until the word
>LINK<starts flashing on the
display.
8. Wait until >LINK 1< appears and release
.
9. Press
. The normal display with a stationary RF
icon
will appear once the synchronisation is
successful.
10. Reconnect the HCB cable (if applicable).
11. Place the automatic burner relay back into the
technical unit and close the hatch.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalfire GP60-59F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalfire GP60-59F in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalfire GP60-59F

Kalfire GP60-59F User Manual - German - 44 pages

Kalfire GP60-59F User Manual - Dutch - 41 pages

Kalfire GP60-59F User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info