694527
20
Zoom out
Zoom in
Previous page
1/40
Next page
20
desired “P” programme is displayed.
3. Wait until the home screen appears.
4.11 Activating/deactivating
the hybrid LED lighting and
adjusting the lighting intensity
If the gas fire is equipped with hybrid
LED lighting, it will be automatically ac-
tivated as soon as the fire is turned on.
The number of horizontal bars at the
bottom of the screen indicate the level
of brightness of the LED lights. LED
lighting can also be activated when the
fire is not on. Carry out the following
steps to activate only the LED lighting:
1. Press
to turn on the screen.
2. Press the right button until “P1, P2
or P3” appears in the centre of the
screen.
3. Press
to activate the LED ighting
or increase its intensity.
4. Press
to deactivate the LED
at identical switch-on times.
17. Press P to exit the programme.
18. The
and icons on the remote
control indicate that the time seg-
ments have been programmed.
4.10 Programme choice for the
hybrid LED lighting
If the gas fire is equipped with a hybrid
LED lighting function, it is possible to
vary the lighting effects. The different
parameters controlling the LED lighting
allow the oscillation, intensity and co-
lour to be set. In every programme, se-
lection of the word “AUTO” provides the
highest and clearest lighting intensity.
Carry out the following steps to adjust
the LED lighting programme:
1. Press the right button
until a “P1,
P2 or P3” appears in the middle of
the display.
2. Press
a number of times until the
Table: LED programme
Programme Reacts to Light clear variation
P1
Setting AUTO and Modulating
between high and low
10% to 90%, fading reddish LED
colour.
P2
Setting AUTO and Modulating
between high and low
10% to 90%, yellowish and reddish
LED colour, alternately on the
left and right-hand sides of the
appliance.
P3
Setting AUTO and Modulating
between high and low
Combination between Programme
P1 en P2
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalfire G125-37C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalfire G125-37C in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalfire G125-37C

Kalfire G125-37C User Manual - German - 44 pages

Kalfire G125-37C User Manual - Dutch - 41 pages

Kalfire G125-37C User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info