694525
7
Zoom out
Zoom in
Previous page
1/40
Next page
7
The gas fire and accompanying remote
control may only be used in accordance
with the reason it was designed and
after review of the Installation Manual
and user instructions.
Modifications of whatever nature can
also affect the safety of the gas fire.
Alterations can nullify the warranty and
the periodic inspection of the gas fire
will come to lapse.
If the gas fire is not installed correctly,
all warranty and/or damage claims
against Kalfire will be declared null and
void.
This gas fire has been tested and
approved according to CE standard
EN-613. Every gas fire that leaves the
factory has been tested for technical
and functional adherence to relevant
quality standards in force.
This user instruction is available in va-
rious languages on www.kalfire.com,
or through your installation bureau.
All translated instructions have been
translated from a Dutch instruction,
which is the original document.
Disclaimer
All rights reserved. No part of this
manual may be copied, distributed or
translated into other languages, in full
or in part, without the prior written per-
mission of Kalfire. Kalfire reserves the
right to make changes to the manual.
Kalfire, however, cannot provide any
warranty, implicitly or explicitly, for this
1. General information
The following sections provide general
information about the gas fire:
- Foreword
- Pictograms
- Warranty
- iMatch interface compatibility
1.1 Foreword
About this manual
This user instruction has been written
for the users of the gas fire. A seperate
Installation Manual accompanies this
User Instructions. The user instructions
should remain in the vicinity of the gas
fire so that they are readily available for
fireplace users.
The gas fire may only be installed by
qualified technicians complying with all
relevant national or local regulations.
The current technology status, the
provisions of the Building & Housing
Inspectorate and the national and Eu-
ropean regulations should be taken into
account with regard to the installation
work and the operation of the gas fire
once fully connected.
Maintenance and repair work may only
be carried out by authorised technical
fitters.
Effective use
This gas fire has been designed as am-
biance heating and has not been desig-
ned to be used as the principal heating
unit for part of a house or throughout
the house.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalfire G110-37S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalfire G110-37S in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalfire G110-37S

Kalfire G110-37S User Manual - German - 44 pages

Kalfire G110-37S User Manual - Dutch - 41 pages

Kalfire G110-37S User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info