707706

K-Stove Saphire Manual

11
Zoom out
Zoom in
Previous page
1/40
Next page
PELLET BURNING STOVES INSTALLATION & MAINTENANCE MANUAL
10
The connection between stove and chimney or flue for the proper operation must
not be less than 5% slope in the horizontal sections whose total length should not
exceed 1.5 meters. and the vertical by a "T" to another (changing direction) must
not be less than 1.5 meters. Check with suitable instruments that there is a
minimum draft. of 10 Pa. At the bottom of the chimney inspected for periodic
inspections and cleaning, which must be conducted annually.
You must ensure that a chimney is installed according to wind force.
This type of connection, even in case of momentary power failure,
ensuring the evacuation of the fumes.
2.9. TROUBLESHOOTING RELATED TO DEFECTS IN THE CHIMNEY FLUE
Of all the meteorological and geographical factors that affect the operation of a flue (rain, fog, snow, altitude above sea
level, period of insulation, exposure to the cardinal points, etc .) the wind is certainly the
most decisive. In fact, besides the thermal depression caused by the difference in
temperature between the inside and the outside the chimney, there is another type of
depression (or overpressure ): the dynamic pressure induced by the wind. An
ascending wind always has the effect of increasing depression and then the draft. A
horizontal wind increases depression for proper installation of the chimney. A
descending wind always has the effect of relieving depression, sometimes inverting it.
In addition to the direction and force of the wind, the position of the flue and the
chimney from the roof of the house and the surrounding landscape is important.
The wind affects the operation of the fireplace also indirectly by creating zones
overpressure and depression as well as the outside, but inside the home. In areas
directly exposed to the wind (2) can create an internal overpressure which can promote
the draft of stoves and fireplaces, but may be countered by external overpressure if the
chimney is placed on the side exposed to the wind (1). In contrast, in areas opposite to
the direction of the wind (3) can create a dynamic depression that comes into
competition with the natural thermal depression developed by the fireplace, but can be
compensated (sometimes) by placing the exhaust duct from the side opposite to the direction of the wind (4)
IMPORTANT!
The operation of the pellet stove is noticeably sensitive to the conformation and position of the flue
which is adopted. Hazardous conditions can only be overcome by suitable setting-up of the stove carried out
by qualified K-Stove personnel.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for K-Stove Saphire at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of K-Stove Saphire in the language / languages: Dutch as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info