685871
13
Zoom out
Zoom in
Previous page
1/36
Next page
11
Manuelle bedIenunG
eIne eInZELNE STATION LAUFEN LASSEN
Die maximale Laufzeit für eine Station ist 12 Stunden 59 Minuten. Um eine einzelne Station einmalig
von Hand zu starten, drehen Sie das Einstellrad auf die
“System Test or Run Single Station” position.
DAS DISPLAY ZEIGT DANN:
Voreingestellt für eine einzelne Station sind 10 Minuten.
Drücken Sie so oft , bis die gewünschte Station erreicht ist.
Passen Sie die Laufzeit an mit
und
.
Der Controller wird die gewählte Station starten und die Laufzeit im Display läuft rückwärts.
Falls eine aktive Pumpe für diese Station eingerichtet ist, blinkt das Pumpen-Icon, sobald
gedrückt wird um anzuzeigen, dass die Pumpe läuft. Sobald die Laufzeit für die einzelne Station abge-
laufen ist, geht diese wieder in den automatischen Modus. D.h., falls Sie vergessen, den Stellknopf
zurück auf zu drehen
“Run” wird der Controller dennoch seine automatischen Starts wie geplant aus-
führen. Um die Station auszuschalten, drehen Sie den Einstellknopf auf
“OFF”
.
TIPP: Wollen Sie den Standardwert von 10 Minuten abändern und den anderen Wert als neue Vorgabezeit ein-
richten, stellen Sie das Wählrad auf “Run Single Station” und drücken
. Dann ändern Sie die Laufzeit mit
oder
. Wird die neue Zeit angezeigt, drücken Sie nochmals
und die neue Vorgabe wird
jetzt immer vorgeschlagen, wenn Sie manuell eine einzelne Station zum Starten auswählen.
EINEN SYSTEMTEST DURCHFÜHREN
Um von Hand einen Systemtest zu starten, drehen Sie den Einstellknopf auf "System Test or Run Single
Station". Drücken Sie dann
und
gleichzeitig.
DAS DISPLAY ZEIGT DANN:
Die Vorgabe für eine einzelne Station ist hier 2 Minuten.
Wenn Sie die Laufzeit NUR FÜR DIESEN Start ändern möchten, nutzen
Sie die Knöpfe.
und
Wenn die richtige Laufzeit eingegeben wurde, schalten Sie die
Station ein und lassen das Programm laufen, indem Sie
drücken.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for K-rain RPS 469 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of K-rain RPS 469 in the language / languages: German as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info