30471
9
Zoom out
Zoom in
Previous page
1/72
Next page
Getting started
Getting started
7
XV-N5SL/LET0204-001A/English
Connection to a TV equipped with component jacks
You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN
jacks of your TV with the video cables.
Connect "Y" to "Y," "P
B" to "PB"(CB), "PR" to "PR"(CR) correctly.
The unit supports the Progressive scanning system (480p) as well as conventional Interlaced scanning system (480i).
If your television or monitor equipped with component jacks supports the progressive video input, you can enjoy a high
quality picture by making the Progressive scanning mode active.
If your television equipped with component jacks does not support the progressive scanning mode
Set the Scan mode selector to "480i."
If your television equipped with component jacks supports the progressive scanning mode
Set the Scan mode selector to "480p."
If you want to select the scan mode between the interlace and progressive modes (depending on the source
condition, or when connecting more than one television etc.)
You can select the mode from the remote control unit. To do this, set the scan mode selector to "REMOTE."
(See "To make the Progressive scanning mode selection active from the remote control unit" on page 8 for details about
how to select the scanning mode from the remote control unit when the scan mode selector us set to "REMOTE.")
NOTES
You must change the switch position on the rear panel while unit power is off. Otherwise, the changed setting is not effective.
When the scan mode is set to the progressive mode, the PROGRESSIVE indicator on the front panel is lit. The color of the
indicator depending on the "PROGRESSIVE MODE" setting on the "PICTURE" preference display and the status of the unit (see
pages 8 and 51).
When connecting to a TV using the VIDEO or S-VIDEO jack, make sure that the PROGRESSIVE indicator on the front panel is
not lit. If it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals. To turn off the PROGRESSIVE indicator, set the
scan mode selector on the rear panel to "480i." Or, while setting the scan mode selector to "REMOTE," make the Progressive
scanning mode inactive by following the procedure described on page 8.
When the component video input jacks of the TV is the BNC type, use an adaptor to convert a pin jack to a BNC jack (optional).
Make "ANALOG DOWN MIX" in the "AUDIO" preference to "STEREO" (see page 53).
If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio
output to monaural.
To improve audio sound quality, connect the AUDIO OUT jacks to your separate audio equipment (see the following pages).
If your TV has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See "AV COMPU LINK remote control
system" on page 60 for details.
VIDEO
AUDIO
RIGHT
LEFT
YP
B
P
R
S-VIDEO
COMPONENT IN
IN
COMPONENT
Green Red
Blue
Component video cable (supplied)
TV
Audio cable (not supplied)
Green Red
Blue
Red White
White
Red
The unit
Scan mode selector
XV-N5SL(J).book Page 7 Wednesday, July 24, 2002 1:04 PM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC XVN5SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC XVN5SL in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info