30467
8
Zoom out
Zoom in
Previous page
1/38
Next page
6
XV-N315B/XV-N316S/XV-N310B/XV-N312S/XV-N210B/XV-N212S/GNT0040-003A/English
P
r
e
p
a
r
a
t
i
o
n
s
C Connecting to a TV with component jacks
You can enjoy picture of high-quality color reproduction by
connecting the COMPONENT VIDEO OUT jacks on the player to
your TV.
NOTES
Connect “Y” to “Y,” “PB” to “PB” (CB), “PR” to “PR” (CR) correctly.
The video output jack, scart connector and component jacks
cannot be used at the same time.
If your TV has component video input jacks of BNC type, use an
adapter which converts a pin jack to a BNC jack (not supplied).
Activating the Progressive scanning mode
Press and hold down VFP - I/P on the remote control unit for a
few seconds.
When the scanning mode is set to the Progressive mode, the [P]
indicator lights up in the display window.
Depending on the [PICTURE SOURCE] preference display and
whether the current DVD VIDEO disc is film-source or video-
source, the indicator that lights up in the display window differs,
as shown in the table below.
NOTES
The Progressive scanning mode works only when you connect
the player’s COMPONENT VIDEO OUT jacks to your TV.
There are some progressive TV and High-Definition TV sets
that are not fully compatible with the player, resulting in the
unnatural picture when playing back a DVD VIDEO disc in the
Progressive scanning mode. In such a case, use the Interlaced
scanning mode. To check the compatibility of your TV set,
contact your local JVC customer service center.
All JVC progressive TV and High-Definition TV sets are fully
compatible with the player (Example: AV-61S902).
For XV-N310B/XV-N312S/XV-N315B/
XV-N316S only
Progressive scan video playback available
In the progressive scanning mode, you can enjoy high quality
picture with less flickers when the COMPONENT VIDEO OUT
jacks are connected to a TV or monitor that supports the
progressive video input.
About the scanning mode
Depending on the material source format, DVD VIDEO discs
can be classified into two types; film source and video source
(note that some DVD VIDEO discs contain both film source
and video source).
When the player plays back a film source material,
uninterlaced progressive output signals are created using the
original information. When a video source material is played
back, the player interleaves lines between the interlaced lines
on each to create the interpolated picture and outputs as the
progressive signal.
R
IG
H
T
L
E
F
T
AUDIO
VIDEO
IN
P
R
P
B
Y
COMPONENT IN
R
IG
H
T
LEFT
VIDE
O
C
O
A
X
IA
L
DIGITAL OUT
P
R
P
B
Y
VIDEO OUT
AUDIO OUT
AV
OUT
COMPONENT
RGB/COMPOSITE
Y/C
COMPONENT
/COMPOSITE
The player
Component video cable (not supplied)
TV
White
Red
Green
Blue
Red
Audio cable (not supplied)
GreenGreen
Blue
Red
White
Red
Set the COMPONENT/
COMPOSITE - Y/C - RGB/
COMPOSITE selector to
“COMPONENT/COMPOSITE.
Setting of
[PICTURE SOURCE]
Source type of DVD VIDEO
Film source Video source
AUTO [DDP] [P]
FILM [DDP] [DDP]
VIDEO (NORMAL)/(ACTIVE) [P] [P]
XV-N210BN212SN310BN312S(B).book Page 6 Monday, December 15, 2003 9:31 PM
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC XVN316S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC XVN316S in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info