29867
24
Zoom out
Zoom in
Previous page
1/36
Next page
21
Tuning in to a Station
You can search for the station by either automatically or
manually.
Auto Tuning
1
Press FM/AM/DAB repeatedly to
select either FM or AM (MW).
The unit automatically turns on and tunes in to
the previously received station.
If the station previously selected is stored in a preset
number, the preset number will also appear.
2
Press and hold ¢ or 4 (or
SCROLL UP ¢ or SCROLL
DOWN 4 on the unit) for
about 2 seconds until Search..
appears on the display.
Searching.. appears and the unit starts searching
for stations.
¢ (SCROLL UP ¢): Increases the frequencies.
4 (SCROLL DOWN 4):
Decreases the frequencies.
The search stops when a station of sufficient signal
strength is tuned in.
If an FM program is broadcast in stereo, the ST (stereo)
indicator lights up on the display (only when the
reception is good).
To stop during searching, press ¢ or 4 (or SCROLL
UP ¢ or SCROLL DOWN 4 on the unit).
Manual Tuning
1
Press FM/AM/DAB repeatedly to
select either FM or AM (MW).
2
Press and hold ¢ or 4 (or
UP ¢ or DOWN 4 on the
unit) for more than 3 seconds.
¢ (SCROLL UP ¢): Increases the
frequencies.
4 (SCROLL DOWN 4): Decreases the
frequencies.
The frequency keeps changing quickly.
To stop during searching, release the button.
When you repeatedly press ¢ or 4 (or SCROLL
UP ¢ or SCROLL DOWN 4 on the unit)
The frequency changes step by step.
Presetting Stations
You can preset 20 FM and 10 AM (MW) stations manually.
In some cases, test frequencies have been already stored
for the tuner since the factory examined the tuner preset
function before shipment. This is not a malfunction. You
can preset the stations you want into memory by following
the presetting method.
There is a time limit in doing the following steps. If the
setting is canceled before you finish, start again from step
2
.
On the remote control ONLY:
1
Tune in to the station you want to preset.
See Tuning in to a Station on the left column.
2
Press PROGRAM.
An available preset number starts flashing on the
display.
3
Press PRESET GROUP or
PRESET GROUP to select a
preset number, then press
PROGRAM.
Station Stored appears and the preset station
is stored in memory.
FM/AM/DAB
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
/FM MODE
REPEAT
Listening to FM and AM (MW) Broadcasts
PROGRAM
To change the FM reception mode
On the remote control ONLY:
When an FM stereo broadcast is hard to receive
or noisy, press FM MODE so that the Mono
appears on the display. Reception will improve.
To restore the stereo effect, press FM MODE
again so that Stereo appears and the ST (stereo) indicator
lights up on the display. In stereo mode, you can hear stereo
sound when a stereo program is broadcast.
The stereo effect also restores when:
changing the band (AM (MW), or DAB).
changing the station frequency.
changing the playing source.
turning off (or on) the unit.
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
FM/AM/DAB
17-24_UX-HB4[B]6.p65 04.8.5, 6:17 PM21
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC UXHB4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC UXHB4 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info