29867
21
Zoom out
Zoom in
Previous page
1/36
Next page
18
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
4
Press SEARCH/SCROLL UP
or SEARCH/SCROLL DOWN
to select a station.
Each time you press the button, the station
changes step by step.
5
Press SELECT.
Signal reception indicator and the
current signal strength level appear (filled
blocks across from left to right).
If
the signal strength level
does not reach to the signal
reception indicator, you cannot listen to the station well.
In this case, adjust the position of the antenna.
6
Press SELECT again.
A station is tuned in.
For the description of information sent from the station,
see page 20.
Tuning in to a Station
1
Press SEARCH/SCROLL UP
or SEARCH/SCROLL DOWN
to select a station.
The list of the station appears.
2
Press SELECT to tune in to the
selected station.
The unit does not tune in to the station
until you press SELECT.
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
On the remote control ONLY:
1
Tune in to the station you want to preset.
2
Press PROGRAM.
An available preset number starts flashing on the
display.
3
Press PRESET GROUP or
PRESET GROUP to select a
preset number, then press
PROGRAM.
The preset station is stored in memory.
4
To preset more stations, repeat steps
1
to
3
above, allocating a different preset number to
each station.
Storing a new station on an already assigned number
erases the previously stored one.
When you unplug the AC power cord or if a power
failure occurs
The preset stations will remain in the unit.
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
PROGRAM
PROGRAM
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
Tuning in to a Preset Station
On the remote control ONLY:
1
Press FM/AM/DAB to select DAB.
The unit automatically turns on and tunes in to
the previously received DAB station.
2
Press PRESET GROUP or
PRESET GROUP repeatedly
to select a preset number.
To tune in to a preset station directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you
to select the preset number you want.
Ex.: For preset number 5, press 5.
For preset number 10, press +10,
then press 0.
When you press a number with no preset station
Empty Preset appears on the display.
FM/AM/DAB
Presetting Stations
You can preset 10 DAB stations manually.
There is a time limit in doing the following steps. If the
setting is canceled before you finish, start again from step
2
.
123
456
78
0
9
+10
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
Signal reception indicator
Signal strength level
Channel and frequency
Information sent from the station (Ex. program type)
Station name
Continued
17-24_UX-HB4[B]6.p65 04.8.5, 6:17 PM18
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC UXHB4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC UXHB4 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info