29938
24
Zoom out
Zoom in
Previous page
1/32
Next page
21
Disc Direct Recording
Everything on the disc goes onto the tape in the order it
is on the disc, or according to the order you have set in
Program Play.
On the unit ONLY:
1
Put a recordable cassette in with the
exposed part of the tape down.
2
Load a disc.
If the current playing source is not the CD
player, press 3/8 CD, then 7 before going to
the next step.
If you do not want pauses of about 4 seconds
recorded between selections, press 3/8 CD
twice. Otherwise, a non-recorded pause will
be automatically inserted between selections.
If you want to record on both sides of a tape, see
To record on both sidesReverse Mode.
3
Press ONE TOUCH
REC (recording).
The
REC
(recording) indicator
lights up on the display and recording starts.
After recording, the CD player and cassette deck
automatically stop.
To stop while recording, press 7.
The tape stops after 4 seconds.
To remove the cassette, press ) on the
unit.
To record on both sidesReverse Mode
On the remote control ONLY:
Press REV.MODE (reverse mode)
repeatedly until
or is lit.
When using the Reverse Mode for Disc
Direct Recording,
lights up and start
recording in the forward (3) direction first. When
the tape reaches its end while recording a song in the
forward direction (3), the last song will be re-
recorded at the beginning of the reverse side (2).
If you start recording on the reverse side (2),
recording will stop when recording is done only on
one side (reverse) of the tape.
When making Sleep Timer settings while doing
Disc Direct Recording
Set enough time to allow for the disc to finish playing;
otherwise, the power will go off before recording is
completed.
One Track Recording
This recording method is convenient when you record
tracks while playing the disc. You can record just your
favorite songs on the tape.
On the unit ONLY:
1
Put a recordable cassette in with the
exposed part of the tape down.
2
Play the track on the disc you wish to
record.
3
Press ONE TOUCH
REC (recording).
The CD player returns to the
beginning of that track and the track is recorded on
the tape.
After recording, the CD player and cassette deck
automatically stop.
4
Repeat steps
2
and
3
to record other
tracks you want.
To stop while recording, press 7.
The tape stops after 4 seconds.
To remove the cassette, press ) on the
unit.
ONE TOUCH
REC
REV.MODE
ONE TOUCH
REC
EN20-28_UX-H30[B]f.pm6 02.12.26, 1:38 PM21
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC UXH30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC UXH30 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info