56333
11
Zoom out
Zoom in
Previous page
1/28
Next page
8
Setting the Clock
Before operating the unit any further, first set the unit’s clock.
When you plug in the power cord, “0:00” starts flashing on
the display.
You can set the clock when the unit is either turned on or in
standby mode.
•There is a time limit in doing the following steps. If the
setting is canceled before you finish, start again from step
1
.
On the remote control ONLY:
1
When the unit is in standby mode,
press and hold DISPLAY/CLOCK
SET until the hour indication starts
flashing.
When the unit is on, press DISPLAY/CLOCK SET to
enter clock mode, then press and hold DISPLAY/
CLOCK SET.
2
Press 4 or ¢ to adjust
the hour, then press
DISPLAY/CLOCK SET.
When you press and hold 4 or
¢, the hour indication changes
continuously.
The minute indication starts flashing.
3
Press 4 or ¢ to adjust
the minute, then press
DISPLAY/CLOCK SET.
When you press and hold 4 or
¢, the minute indication changes
continuously.
“CLOCK OK” appears on the display for a
while and the built-in clock starts.
Basic and Common Operations
DISPLAY/
CLOCK SET
Turning On the Power
To turn on the unit, press STANDBY/ON.
The standby lamp on the unit goes off.
•When you press the source button—TAPE,
TUNER/BAND and CD, the unit automatically
turns on.
To turn off the unit (standby), press STANDBY/ON
again.
The standby lamp on the unit lights red.
“0:00” flashes on the display until you set the built-in
clock. After setting the clock, the clock time will appear on
the display while the unit is on standby.
•A little power is always consumed even while the unit is in
standby mode.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
When you unplug the AC power cord or if a power
failure occurs
The clock is reset to “0:00” right away. If this happens, set the clock
again.
STANDBY/ON
When you unplug the AC power cord or if a power failure
occurs
The clock is reset to “0:00” right away. If this happens, set the
clock again.
The clock may gain or lose 1 to 2 minutes per month
If this happens, reset the clock.
To show the clock when the unit is turned on
On the remote control ONLY:
Press DISPLAY/CLOCK SET.
Each time you press the button, the display
changes the clock indication and the normal
indication alternately.
To change the clock
Repeat steps
1
to
3
of the procedure “Setting the Clock.
Continued
DISPLAY/
CLOCK SET
DISPLAY/
CLOCK SET
DISPLAY/
CLOCK SET
UX-S10[B]_C_05basic_f.p65 06.3.10, 5:17 PM8
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC UX-S10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC UX-S10 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC UX-S10

JVC UX-S10 User Manual - German, Dutch, French, Italian - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info