Manual JVC UX-G33 (page 21 of 24) (English)

56278

Zoom out

Zoom in

1/24

Additional Information

Learning More about This System

Daily Operations—Playback

(see pages 7 to 9)

Listening to the Radio:

• If you store a new station into an occupied preset number,

the previously stored station in that number will be erased.

• When you unplug the AC power cord or if a power failure

occurs, the preset stations will be erased in a few days. If

this happens, preset the stations again.

Playing Back a Disc:

• When using an 8 cm disc, place it on the inner circle of the

disc tray.

• This System cannot play “packet write” discs.

• For MP3 playback...

– MP3 discs require a longer readout time than regular

CDs. (It depends on the complexity of the group/file

configuration.)

– Some MP3 files cannot be played back and will be

skipped. This results from their recording processes and

conditions.

– When making MP3 discs, use ISO 9660 Level 1 or Level

2 for the disc format.

– This system can play back MP3 files with the extension

code <.mp3> (regardless of the letter case—upper/

lower).

– It is recommended that you make each MP3 file at a

sampling rate of 44.1 kHz and at a bit rate of 128 kbps.

This System cannot play back files made at a bit rate of

less than 64 kbps.

– Playback order of MP3 tracks may be different from

what you have intended when recording (see below). If a

folder does not include MP3 tracks, they are ignored.

– This System plays back MP3 tracks as follows.

• This System can recognize up to 999 tracks in a disc. Also,

the System can recognize up to 256 tracks per group and up

to 99 groups in a disc.

– Even if a folder contains no playable files, the folder is

also counted in the total folder number.

– Playable files which do not belong to any groups are

handled as Group 1.

Playing Back a Portable Audio Device:

• When QP Link fails due to a weak sound signal from the

AUX jack, Auto Standby may turn the System off even if

you can hear the sound from the speakers.

In such cases, adjust the volume level of the component

louder so that the System can detect the sound signal

properly.

• Changing from AUX to another source while QP Link

works will deactivate QP Link temporarily.

In this case, the following reactivates QP Link:

– Pressing QP LINK on the remote control

– Unplugging the component from the AUX jack, then

plugging it in again

• If you press STANDBY/ON to turn the System off or

if preset Timer turns the System off while QP Link works,

the System will deactivate QP Link temporarily.

In such cases, the following reactivates QP Link:

– When the sound signal from the AUX jack stops or is too

weak for about 30 seconds after the System is turned off

– When you turn on the power again

• QP Link may start working when you just plug in the

component to the AUX jack or unplug it. This is not a

malfunction.

Daily Operations—Sound&Other Adjustments

(see pages 10 and 11)

Adjusting the Volume:

• Be sure to turn down the volume before connecting or

putting on the headphones.

Adjusting the Sound:

• This function also affects the sound through the

headphones.

Setting the Clock:

• “0:00” will flash on the display until you set the clock.

• The clock may gain or lose 1 to 2 minutes per month. If this

happens, reset the clock.

Advanced Radio Operations

(see pages 12

and 13)

• If the System takes time to show the Radio Data System

information—PS, PTY, RT signals, “PS,” “PTY,” or “RT”

will appear while searching.

Advanced Disc Operations

(see pages 14 and 15)

Programming the Playing Order—Program Play:

• You cannot specify a group number of an MP3 disc for

Program Play.

• If you try to program the 100th track, “FULL” appears on

the display.

04 05

}

ROOT

Group with its play order

MP3 track with its play order

Hierarchy

Level 1 Level 2 Level 3 Level 4 Level 5

UX-G30[B].book Page 18 Tuesday, February 14, 2006 5:00 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JVC UX-G33 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC UX-G33

JVC UX-G33 User Manual - German, Dutch, French, Italian - 88 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JVC UX-G33 Manual

Product: