57099
56
Zoom out
Zoom in
Previous page
1/68
Next page
54
The COMPU LINK remote control system allows you to operate
JVC audio components through the remote sensor on the center unit.
To use this remote control system, you need to connect JVC audio
components through the COMPU LINK-3 (SYNCHRO) jacks (see
below) in addition to the connections using cables with RCA pin
plugs (see pages 8 and 9).
Make sure that the AC power cords of these components are
unplugged before connection. Plug the AC power cords only after
all connections are complete.
Notes:
If your audio component has two COMPU LINK-3 (SYNCHRO)
jacks, you can use either one.
To operate the cassette deck or MD recorder using the COMPU
LINK remote control system, set the source name correctly.(see
page 17).
Refer also to the manuals supplied with your audio components.
This remote control system allows you to use three functions
listed right.
Synchro recording for the casette deck or MD recorder using the
COMPU LINK remote control system is not compatible with the
center unit.
COMPU LINK Remote Control System
Cassette deck
or
MD recorder
Remote Control through the Remote Sensor on the
center unit —————————————————
You can control the connected audio components through the remote
sensor on the center unit using this remote control. Aim the remote
control directly at the remote sensor on the center unit. For details,
see page 10.
Automatic Source Selection ——————————
When you press the play (3) button on a connected component or
on its own remote control, the center unit automatically turns on and
changes the source to the component. On the other hand, if you
select a new source on the center unit or on the remote control, the
selected component begins playing immediately.
In both cases, the previously selected source continues playing
without sound for a few seconds.
Automatic Power On/Off (Standby): only possible with
the COMPU LINK-3 connection —————————
Cassette deck (or MD recorder) turns on and off (standby) along with
the center unit.
When you turn on the center unit, the cassette deck (or MD recorder)
will turn on automatically, depending on which component has been
previously selected.
When you turn off the center unit, the cassette deck (or MD recorder)
will turn off (standby).
TH-A10[J]7/1 00.2.24, 14:5954
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC TH-A10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC TH-A10R in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC TH-A10R

JVC TH-A10R User Manual - English - 68 pages

JVC TH-A10R User Manual - Dutch - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info