56625

JVC SP-UXG49 Manual

39
Zoom out
Zoom in
Previous page
1/44
Next page
36
Troubleshooting
General:
Adjustments or settings are suddenly canceled before
you finish.
] There is a time limit. Repeat procedure again.
Operations are disabled.
] The built-in microprocessor may malfunction due to
external electrical interference. Unplug the power cord
and then plug it back in.
Unable to operate the System from the remote control.
] The path between the remote control and the remote
sensor on the System is blocked.
] The batteries are exhausted.
No sound is heard.
] Speaker connections are incorrect or loose.
] Headphones are connected.
No picture appears on the TV screen.
] The video cord connections are incorrect or loose.
No picture is displayed on the TV screen, the picture is
blurred, or the picture is divided into two parts.
] The System is connected to a TV which does not support
progressive video input.
] Incorrect scanning mode is selected (see page 14).
] When you unplug the power cord and plug it back again,
the scanning mode may change back to the initial setting
(“RGB”) (see page 14).
The left and right edges of the picture are missing on the
screen.
] Select “4:3 LB” for “MONITOR TYPE” (see page 31).
Radio Operations:
Hard to hear broadcasts because of noise.
] Antenna connections are incorrect or loose.
] The AM loop antenna is too close to the System.
] The FM antenna is not properly extended and
positioned.
Disc/USB mass storage class device Playback
Operations:
The disc does not play.
] You have inserted a disc whose Region Code is not “2.”
(“RG ERROR” appears on the display.)
] The disc is placed upside down. Place the disc with the
label side facing up.
ID3 Tag on an MP3 file cannot be shown.
]
There are two types of ID3 Tag—Version 1 and Version 2.
This System can only show ID3 Tag Version 1.
Groups and tracks are not played back as you expect.
] The playing order is determined when the groups and
tracks were recorded. It depends on the writing
application.
MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2 or DivX
files are not played back.
] The disc or the USB mass storage class device may
contain different types of files (ex. MP3/WMA/WAV/
JPEG). In this case, you can only play back the files
selected by the “FILE TYPE” setting (see page 31).
] You have changed the “FILE TYPE” setting after the
System read the disc or the USB mass storage class
device. In this case, reload the disc or disconnect the
USB mass storage class device and connect it again.
The disc sound is discontinuous.
] The disc is scratched or dirty.
No subtitle appears on the display though you have
selected the initial subtitle language.
] Some DVDs/DivX files are programmed not to display
any subtitle initially. If this happens, press SUBTITLE
after starting play back (see page 19).
Audio language is different from the one you have
selected as the initial audio language.
] Some DVDs/DivX files are programmed to always use
the original language initially. If this happens, press
AUDIO/MPX after starting playback (see page 18).
The disc tray does not open or close.
] The power cord is not plugged in.
] Child Lock is in use. “LOCKED” appears in the display
window (see page 23).
QP Link Operations:
The System automatically turns on even if the Timer
turns the System to standby or if you turn the System to
standby while playback is going on the digital audio
player.
] In this case, deactivate QP Link or stop playback on the
digital audio player connected to the LINE IN jack.
Timer Operations:
Daily Timer does not work.
] The System has been turned on when the on-time came.
Timer starts working only when the System is turned off.
Daily Timer does not start playback.
] The loaded disc is a DVD Video. Change the disc.
UX-G48[B].book Page 36 Friday, June 22, 2007 11:28 AM
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC SP-UXG49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC SP-UXG49 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC SP-UXG49

JVC SP-UXG49 User Manual - German, Dutch, French, Italian - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info