56499
39
Zoom out
Zoom in
Previous page
1/44
Next page
36
Tuner operations
When the stereo FM program currently tuned in is noisy,
you can change the FM reception mode to improve the
reception.
7While listening to an FM station
Press FM MODE.
The FM reception mode appears on the display window.
Each time you press the button, the FM reception mode
changes.
AUTO:
When a program is broadcast in stereo, you will hear
stereo sound. (The ST indicator lights on the display
window.) When in monaural, you will hear monaural
sound. This mode is also useful to suppress static noise
between stations.
MONO:
Reception will be improved although you will lose the
stereo effect. (The MONO indicator lights up on the
display window.) In this mode, you will hear noise until
you are tuned in to a station.
The Radio Data System allows FM stations to send an
additional signal along with their regular program signals.
For example, the stations send their station names, as well
as information about what type of program they broadcast,
such as sports or music, etc.
With the system, you can receive the following types of
Radio Data System signals:
PS (Program Service): Shows commonly known station
names.
PTY (Program Type): Shows the types of programs
broadcast.
RT (Radio Text): Shows text messages the station sends.
Enhanced Other Network: See page 38.
NOTE
The Radio Data System is not available for AM (MW)
broadcasts.
The Radio Data System may not operate correctly if the
station tuned in is not transmitting
Radio Data System
signals properly or if the signal strength is weak.
7 To show the Radio Data System signals information
Press DISPLAY while holding SHIFT,
while listening to an FM station.
Each time you repeat the procedure, the indication on the
display window changes.
PS (Program Service):
While searching, “PS” appears and then the station
names will be displayed. “NO PS” appears if no signal is
sent.
PTY (Program Type):
While searching, “PTY” appears and then the type of the
broadcast program will be displayed. “NO PTY” appears
if no signal is sent.
RT (Radio Text):
While searching, “RT” appears and then text messages
the station sends will be displayed. “NO RT” appears if no
signal is sent.
Frequency:
Station frequency (non-Radio Data System service).
About characters shown in the display window
When PS, PTY, or RT signals appear in the display window,
some special characters and marks may not be displayed
correctly.
NOTE
If searching finishes immediately, “PS”, “PTY”, and “RT” will
not appear on the display window.
Searching for a program by PTY code
One of the advantages of the Radio Data System service is
that you can locate a particular kind of program from the
preset channels (see page 35) by specifying the PTY code.
7 To search for a program using the PTY code
NOTE
Before you start operation:
Press FM/AM on the remote control to select an FM
station.
The PTY Search is only applicable to preset stations.
To stop searching any time during the process, press PTY
SEARCH while searching.
There is a time limit for doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
Selecting the FM reception
mode
Using the Radio Data System
when receiving FM stations
See page 35 for button locations.
EN_TH-U1[B]-03body.fm Page 36 Wednesday, July 25, 2007 4:06 PM
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC SP-THU1C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC SP-THU1C in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC SP-THU1C

JVC SP-THU1C User Manual - German - 86 pages

JVC SP-THU1C User Manual - Dutch - 86 pages

JVC SP-THU1C User Manual - French - 86 pages

JVC SP-THU1C User Manual - Italian - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info