Manual JVC SP-THG60F (page 4 of 34) (English)

56410

Zoom out

Zoom in

1/34

TH-G60

Consists of XV-THG60 and SP-THG60C/F/S/W

DVD DIGITAL CINEMA SYSTEM

INSTRUCTIONS

LVT1915-004A

[B]

HT993SJ_ENG

TUNING TUNING

G-1

This lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

dangerous voltage within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the product.

WARNING: Do not install this equipment in a confined

space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer's

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from overheating.

The openings should be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product should not be placed in a built-in

installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer's

instruction have been adhered to.

CAUTION:

CLASS1 LASER PRODUCT

This product employs a Laser System.

To ensure proper use of this product, please read this

owner’s manual carefully and retain it for future

reference. Should the unit require maintenance,

contact an authorized service center.

Use of controls, adjustments or the performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to

open the enclosure. Visible laser radiation when open.

DO NOT STARE INTO BEAM.

CAUTION:

• Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a

newspaper or cloth, etc., the heat may not be able to

get out.)

• Do not place any naked flame sources, such as

lighted candles, on the apparatus.

• When discarding batteries, environmental problems

must be considered and local rules or laws

governing the disposal of these batteries must be

followed strictly.

• Do not expose this apparatus to rain, moisture,

dripping or splashing and that no objects filled with

liquids, such as vases, shall be placed on the

apparatus.

• Battery shall not be exposed to excessive heat such

as sunshine, fire or the like.

• The STANDBY/ON button does not completely shut

off mains power from the unit, but switches operating

current on and off.

CLASS 1 LASER PRODUCT

KLASSE 1

LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1

LASER APPARAT

CLASSE 1

PRODUIT

LASER

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

WARNING: TO PREVENT FIRE OR ELECTRIC

SHOCK HAZARD, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

G-2

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects filled with

liquids, such as vases, should be placed on the

apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon

a dedicated circuit;

That is, a single outlet circuit which powers only that

appliance and has no additional outlets or branch

circuits. Check the specification page of this owner's

manual to be certain.

Do not overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords, frayed

power cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could result in

electric shock or fire. Periodically examine the cord of

your appliance, and if its appearance indicates

damage or deterioration, unplug it, discontinue use of

the appliance, and have the cord replaced with an

exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord

exits the appliance.

To disconnect power from the mains, pull out the

mains cord plug. When installing the product, ensure

that the plug is easily accessible.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is

attached to a product it means the product is

covered by the European Directive

2002/96/EC.

2. All electrical and electronic products should

be disposed of separately from the municipal

waste stream via designated collection

facilities appointed by the government or the

local authorities.

3. The correct disposal of your old appliance

will help prevent potential negative

consequences for the environment and

human health.

4. For more detailed information about disposal

of your old appliance, please contact your

city office, waste disposal service or the

shop where you purchased the product.

Dear Customer,

This apparatus is in conformance with the

valid European directives and standards

regarding electromagnetic compatibility and

electrical safety.

European representative of Victor Company

of Japan, Limited is:

JVC Technical Services Europe GmbH

Postfach 10 05 04 61145 Friedberg

Germany

G-3

Some Do’s and Don’ts on the

Safe Use of Equipment

This equipment has been designed and manufactured to

meet international safety standards but, like any

electrical equipment, care must be taken if you are to

obtain the best results and safety is to be assured.

DO read the operating instructions before you attempt to use

the equipment.

DO ensure that all electrical connections (including the mains

plug, extension leads and interconnections

betweenpieces of equipment) are properly made and in

accordance with the manufacturer’s instructions. Switch

off and withdraw the mains plug when making or

changing connections.

DO consult your dealer if you are ever in doubt about the

installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any

doubt about it working normally, or if it is damaged in

any way-switch off, withdraw the mains plug and

consult your dealer.

DON’T remove any fixed cover as this may expose

dangerous voltages.

DON’T leave equipment switched on when it is unattended

unless it is specifically stated that it is designed for

unattended operation or has a standby mode. Switch

off using the switch on the equipment and make sure

that your family knows how to do this. Special

arrangements may need to be made for infirm or

handicapped people.

DON’T use equipment such as personal stereos or radios so

that you are distracted from the requirements of road

safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume, as such use

can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example

with curtains or soft furnishings. Overheating will

cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood

screws-to ensure complete safety always fit the

manufacturer’s approved stand or legs with the

fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or

moisture.

ABOVE ALL...

- NEVER let anyone especially children push anything into

holes, slots or any other opening in the case-this could

result in a fatal electrical shock;

- NEVER guess or take chances with electrical equipment of

any kind-it is better to be safe than sorry!

Safety Precautions

IMPORTANT:

Connection to the mains supply in the United

Kingdom.

DO NOT cut off the mains plug from this

equipment.

If the plug fitted is not suitable for the power points in

your home or the cable is too short to reach a power

point, then obtain a proper safety approved extension

lead/adapter or consult your dealer.

In the unlikely event of the plug fuse failing be sure

to replace the fuse only with an identical approved

type, as originally fitted, and to replace the fuse

cover. If the fuse fails again consult your nearest

JVC dealer.

If nonetheless the mains plug is cut off remove the fuse

and dispose of the plug immediately, to avoid a

possible shock hazard by inadvertent connection to the

mains supply.

If this product is not supplied fitted with a mains plug

then follow the instructions given below:

DO NOT make any connection to the Larger Terminal

coded E or Green.

The wires in the mains lead are coloured in accordance

with the following code:

If these colours do not correspond with the terminal

identifications of your plug, connect as follows:

Blue wire to terminal coded N (Neutral) or coloured

Black.

Brown wire to terminal coded L (Live) or coloured Red.

If in doubt - consult a competent electrician.

Blue to N (Neutral) or Black

Brown to L (Live) or Red

Introduction . . . . . . . . . . . . . . . . . . .2-5

About the Symbol Display . . . . . . . . . . . . . .2

Symbol Used in this Manual . . . . . . . . . . . . . . .2

Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .2

Handling Discs . . . . . . . . . . . . . . . . . . . . . . . .2

Storing Discs . . . . . . . . . . . . . . . . . . . . . . . . .2

Cleaning Discs . . . . . . . . . . . . . . . . . . . . . . . .2

Types of Playable Discs . . . . . . . . . . . . . . . . . .3

Regional Code . . . . . . . . . . . . . . . . . . . . . . . . . .3

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .5

Remote Control operation . . . . . . . . . . . . . . .5

Remote Control Battery installation . . . . . . . .5

Installation and Setup . . . . . . . . .6-14

TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . .6

Video connection . . . . . . . . . . . . . . . . . . . . . .6

Component Video connection . . . . . . . . . . . .6

SCART connection . . . . . . . . . . . . . . . . . . . . .6

Optional Equipment Connection . . . . . . . . . . .7

AUX IN connection (A) . . . . . . . . . . . . . . . . . .7

OPTICAL IN connection (O) . . . . . . . . . . . . . .7

AUDIO IN connection (D) . . . . . . . . . . . . . . . .7

USB connection (U) . . . . . . . . . . . . . . . . . . . .8

Antenna Connection . . . . . . . . . . . . . . . . . . . . .8

HDMI Connection . . . . . . . . . . . . . . . . . . . . . . . .9

About HDMI . . . . . . . . . . . . . . . . . . . . . . . . . .9

Resolution setting . . . . . . . . . . . . . . . . . . . . . .9

Available resolution according to connection .9

Speaker System Connection . . . . . . . . . . . . .10

Connecting the front speakers . . . . . . . . . . . .11

Displaying Disc Information on-screen . . . . .12

Initial Settings . . . . . . . . . . . . . . . . . . . . . . .12-16

OSD Initial language settings . . . . . . . . . .12

General Operation . . . . . . . . . . . . . . . . . .13

Language . . . . . . . . . . . . . . . . . . . . . . . . .13

• OSD . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

• Disc Audio / Subtitle / Menu . . . . . . . . .13

DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . .13

• TV Aspect . . . . . . . . . . . . . . . . . . . . . . .13

• Display Mode . . . . . . . . . . . . . . . . . . . . .13

• TV Output Select . . . . . . . . . . . . . . . . . .13

•Video Resolution . . . . . . . . . . . . . . . . . .14

AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

• Dynamic Range Control (DRC) . . . . . . .14

•Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . .14

• HD AV Sync . . . . . . . . . . . . . . . . . . . . .14

5.1 SPEAKER SETUP . . . . . . . . . . . . . . . . .15

LOCK (PARENTAL CONTROL) . . . . . . . . . .15

• Initial Setting the Area Code . . . . . . . . .15

• Rating . . . . . . . . . . . . . . . . . . . . . . . . . .16

• Password . . . . . . . . . . . . . . . . . . . . . . . .16

• Area Code . . . . . . . . . . . . . . . . . . . . . . .16

OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . .16

• PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

• DivX(R) Registration . . . . . . . . . . . . . . .16

Operations . . . . . . . . . . . . . . . . .17-25

General Features . . . . . . . . . . . . . . . . . . . . . . .17

Additional Features . . . . . . . . . . . . . . . . . . . . .18

Playing an Audio CD or MP3/WMA file . . . . .19

Programmed Playback . . . . . . . . . . . . . . . . . .20

Repeat Programmed Tracks . . . . . . . . . . . .20

Erasing a Track from Program List . . . . . . .20

Erasing the Complete Program List . . . . . . .20

Viewing a JPEG file . . . . . . . . . . . . . . . . . . . . .21

Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . .21

Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . .21

Moving to another file . . . . . . . . . . . . . . . . . .21

Rotating the picture . . . . . . . . . . . . . . . . . . .21

Playing a DivX Movie file . . . . . . . . . . . . . . . .22

Presetting the Radio Stations . . . . . . . . . . . . .23

To tune in a station with a weak signal . . . .23

To clear all the stored stations . . . . . . . . . .23

Listening to the Radio . . . . . . . . . . . . . . . . . . .23

To turn off the radio . . . . . . . . . . . . . . . . . . .23

To listen to non-preset radio stations . . . . .23

To select a preset radio station directly . . . .23

RDS Operation . . . . . . . . . . . . . . . . . . . . . . . . .24

Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . .25

Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Setting the disc ejection lock . . . . . . . . . . . . .25

Enjoying audio form an external source . . . .25

Setting the surround mode . . . . . . . . . . . . . . .25

Reference . . . . . . . . . . . . . . . . . . .26-29

Language Codes . . . . . . . . . . . . . . . . . . . . . . . .26

Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Troubleshooting . . . . . . . . . . . . . . . . . . . . . .27-28

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Contents

To ensure proper use of this product, please read this

owner’s manual carefully and retain it for future

reference.

This manual provides information on the operation

and maintenance of your DVD player. Should the unit

require service, contact an authorized service location.

About the Symbol Display

“ ” may appear on your TV display during

operation and indicates that the function explained in

this owner’s manual is not available on that specific

DVD video disc.

Symbol Used in this Manual

Note:

Indicates special notes and operating features.

Tip:

Indicates tips and hints for making the task easier.

A section whose title has one of the following symbols is

applicable only to the disc represented by the symbol.

All discs and file listed below

DVD and finalized DVD±R/RW

Video CDs

Audio CDs

MP3 files

WMA files

JPEG files

DivX files

Screen Saver

The screen saver activates when there is no

operation made for approximately 5 minutes since a

still picture was last displayed.

To cancel the screen saver, push any key.

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the

disc by the edges so that fingerprints do not get on

the surface. Never stick paper or tape on the disc.

Storing Discs

After playing, store the disc in its case. Do not expose

the disc to direct sunlight or sources of heat and never

leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Fingerprints and dust on the disc can cause poor

picture quality and sound distortion. Before playing,

clean the disc with a clean cloth. Wipe the disc from

the center out.

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

DivX

JPEG

WMA

MP3

ACD

VCD

DVD

ALL

Introduction

Types of Playable Discs

DVD

(8 cm / 12 cm disc)

Video CD (VCD)

(8 cm / 12 cm disc)

Audio CD

(8 cm / 12 cm disc)

In addition, this unit can play a DVD±R, DVD±RW,

SVCD and CD-R or CD-RW that contains audio titles,

MP3, WMA, JPEG or DivX files.

Notes:

• Depending on the conditions of the recording

equipment or the CD-R/RW (or DVD±R/RW) disc

itself, some CD-R/RW (or DVD±R/RW) discs

may not be played on the unit.

• Do not use irregularly shaped CDs (e.g., heart-

shaped or octagonal) since they may result in

malfunctions.

• This unit requires discs and recordings to meet

certain technical standards in order to achieve

optimal playback quality. Pre-recorded DVDs are

automatically set to these standards. There are

many different types of recordable disc formats

(including CD-R containing MP3 or WMA files) and

these require certain pre-existing conditions (see

above) to ensure compatible playback.

Customers should note that permission is

required in order to download MP3 / WMA files

and music from the Internet. Our company has

no right to grant such permission. Permission

should always be sought from the copyright

owner.

Regional Code

This unit has a regional code printed on the rear of the

unit. This unit can play only DVD discs labelled as the

same as the rear of the unit or “ALL”.

Notes on Regional Codes

• Most DVD discs have a globe with one or more

numbers in it clearly visible on the cover. This

number must match your unit’s regional code or the

disc cannot play.

• If you try to play a DVD with a different regional

code from your player, the message “Check

Regional Code” appears on the TV screen.

Notes on Copyrights:

It is forbidden by law to copy, broadcast, show,

broadcast via cable, play in public, or rent copyrighted

material without permission. This product features the

copy protection function developed by Macrovision.

Copy protection signals are recorded on some discs.

When recording and playing the pictures of these

discs picture noise will appear. This product

incorporates copyright protection technology that is

protected by method claims of certain U.S. patents

and other intellectual property rights owned by

Macrovision Corporation and other rights owners.

The Use of this copyright protection technology must

be authorized by Macrovision Corporation, and is

intended for home and other limited viewing uses only

unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is

prohibited.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH

DEFINITION TELEVISION SETS ARE FULLY

COMPATIBLE WITH THIS PRODUCT AND MAY

CAUSE ARTIFACTS TO BE DISPLAYED IN THE

PICTURE. IN CASE OF 525 PROGRESSIVE SCAN

PICTURE PROBLEMS, IT IS RECOMMENDED THAT

THE USER SWITCH THE CONNECTION TO THE

‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE

QUESTIONS REGARDING OUR TV SET

COMPATIBILITY WITH THIS MODEL 525p DVD

PLAYER, PLEASE CONTACT OUR CUSTOMER

SERVICE CENTER.

Front Panel

11//''

(STANDBY/ON)

Switches the unit ON and OFF.

b Disc Tray

Insert a disc here.

c USB port

Connect to a USB port of a memory device (USB

memory etc.)

d AUDIO IN

The AUDIO IN port means you can connect a

audio device to play through the surround

sound

speakers.

e Z (OPEN/CLOSE)

Opens or closes the disc tray.

f B (PLAY)

Starts playback.

SOURCE

Press and hold down this button about 3 seconds,

then press repeatedly to select other function

(PAUSE)

Pause playback.

FM MODE

This will change the tuner from stereo to mono

and usually improve the reception.

h x (STOP)

Stops playback.

i . (SKIP)

Returns to the beginning of current chapter or

track or go to the previous chapter or track.

(SCAN)

During playback, press and hold this button

repeatedly to select the required scan speed.

- TUNING

Tunes in the desired radio station.

j > (SKIP)

Go to the next chapter or track.

(SCAN)

During playback, press and hold this button

repeatedly to select the required scan speed.

+ TUNING

Tunes in the desired radio station.

k VOLUME controller

abcd e fghijk

Introduction

Remote Control

Remote Control operation

Point the remote control at the remote sensor and

press the buttons.

Cautions:

• Do not mix old and new batteries and never mix

different types of batteries such as standard,

alkaline, etc.

• Do not put the batteries in the place where young

children can reach.

• Battery shall not be exposed to excessive heat

such as sunshine, fire or the like.

• When discarding batteries, environmental problems

must be considered and local rules or laws

governing the disposal of these batteries must be

followed strictly.

Remote Control Battery installation

Detach the battery cover on the rear

of the remote control, and insert two

batteries (size AAA) with 3 and #

aligned correctly.

AUDIO (

11//''

)

Switches the unit ON and OFF.

FUNCTION

Selects the function

(DVD/CD, FM, AM)

INPUT

Changes the input source

( AUX, AUX OPT, AUDIO IN, USB,

TV-AUDIO)

SLEEP

Sets the System to turn off

automatically at a specified time.

DIMMER

Changes brightness of the display

window on the front panel during in

power-on status.

RETURN

Press to move back wards in the

menu.

TOP MENU

If the current DVD title has a menu,

the title menu appears on the

screen. Otherwise, the disc menu

may appear.

Accesses the menu on a DVD disc.

SET UP

Accesses or removes setup menu.

DISPLAY

Accesses On-Screen display.

b/B/v/V (left/right/up/down)

Selects an option in the menu.

ENTER

Acknowledges the menu selection.

PRESET (

)

Selects program of Radio.

TUNING. (

)

Tunes in the desired radio station.

0-9 numerical buttons:

Selects numbered options in a

menu.

SURROUND

Selects the surround mode.

SUBTITLE

Selects a subtitle language (DVD).

PROG./MEMO.

Accesses or removes Program

menu.

Enter a radio station’s frequency into

the tuner.

REPEAT

Repeats chapter, track, title, all

CLEAR

Removes a track number on the

Program List.

SCAN/SLOW(bb/BB)

Searches backward or forward.

Reverse/ Forward slow playback.

SKIP (

)

STOP (

)

PLAY (B)

FM MODE

This will change the tuner from

stereo to mono and usually improve

the reception.

PAUSE/STEP (

)

VOLUME (-/+)

Adjusts speaker volume.

MUTING

RDS DISPLAY

Views the various displays of the RDS

options.

PTY SEARCH

To start a search for a specific PTY type.

TUNING TUNING

TV Connection

Make one of the following connections, depending on

the capabilities of your existing equipment.

Tips:



Depending on your TV and other equipment you

wish to connect, there are various ways you could

connect the

DVD/CD Receiver

. Use one of the

connections described below.



Please refer to the manuals of your TV, VCR,

Stereo System or other devices as necessary to

make the best connections.

Caution:



Make sure the DVD/CD Receiver is connected

directly to the TV. Select the correct AV input on

your TV.



Do not connect your

DVD/CD Receiver

to TV via

your VCR. The DVD image could be distorted by

the copy protection system.



Do not connect your

DVD/CD Receiver

to TV with

cables more than two kinds. In some case, picture

distortion may occur during playback.

Video connection

Connect the MONITOR OUT jack from the DVD/CD

Receiver to the VIDEO IN jack on the TV using the

video cable (V).

Component Video connection

Connect the COMPONENT VIDEO OUT jacks from

the DVD/CD Receiver to the corresponding jacks on

the TV using an Y P

B P

R cable (C).



If your television is a high-definition or “digital

ready” television, you may take advantage of the

DVD/CD Receiver

’s progressive scan output for the

highest video resolution.



If your TV does not accept your resolution setting,

abnormal picture appears on the screen. Please

read owner’s manual for TV then set the resolution

that your TV can accept.

SCART connection

Connect the EURO AV OUTPUT (TO TV) socket on

the DVD/CD Receiver to the corresponding jacks on

the TV using the scart cable (T).

Notes:



The HDMI mode must be set to OFF for VIDEO

OUT and Component video connections.



A picture via scart input is not supported.

Installation and Setup

COMPONENT VIDEO /

PROGRESSIVE SCAN INPUT

VIDEO

INPUT

SCART INPUT

Rear of DVD/CD Receiver

Rear of TV

(supplied)

(not supplied)

(not

supplied)

Installation and Setup

Optional Equipment

Connection

AUX IN connection (A)

Connect a Output of auxiliary device to the AUX

AUDIO Input (L/R) Connector.

OPTICAL IN connection (O)

Connect an optical output of DVD Player (or Digital

Device etc) to the OPTICAL IN connector.

AUDIO IN connection (D)

Connect a output of portable device (MP3 or PMP

etc) to the AUDIO input connector.

VIDEO

OUT IN

AUDIO (L)

AUDIO (R)

OPTICAL

OUT

Rear of DVD/CD Receiver

Auxiliary device

DVD Player

(or Digital

Device, etc)

To AUDIO OUT (L/R)

To AV IN AUDIO (L/R)

Portable device

To AUDIO OUT

To AUDIO IN

(not supplied)

USB connection (U)

Connect the USB port of USB Memory (or MP3

player, etc.) to the USB port on the front of the unit.

If you want to opterate functions, see the operation

section.

Removing the USB Device from the unit

1. Choose a different function mode or press STOP

(x) twice in a row.

2. Remove the USB device from the unit.

Notes:



Don’t extract the USB device while operating.



Music files (MP3/WMA), image files (JPEG) and

video files can be played.



This unit can not use a USB HUB.



Recommended Memory Cards.

Compact Flash Card (CFC), Micro Drive (MD), Smart

Media Card (SMC), Memory Stick (MS), Secure Digital

Card (SD), Multi Media Card (MMC), Memory Stick Pro

(MS-Pro)

- Compatible with : FAT16, FAT32

- Only use the memory cards recommended.



Devices which require additional program

installation when you have connected the unit to a

computer are not supported.



In case of a USB HDD, make sure to connect an

auxiliary power cord to the USB HDD for proper

operation. Up to four primary partitions of a drive are

supported. If there is an extension partition, it will not

be supported.



If the drive of USB device is two or more, a drive

folder is displayed on the screen. If you want to

move to the initial menu after you select a folder,

press RETURN.



Digital cameras and mobile phones are not

supported.

Antenna Connection

Connect the supplied FM/AM antenna for listening to

the radio.



Connect the AM Loop antenna to the AM antenna

connector.



Connect the FM Wire antenna to the FM antenna

connector.

Notes:



To prevent noise pickup, keep the AM Loop antenna

away from the DVD/CD Receiver and other components.



Be sure to fully extend the FM wire antenna.



After connecting the FM Wire antenna, keep it as

horizontal as possible.

USB Memory, MP3 Player (or

Memory Card Reader, etc.)

FM Wire Antenna

(supplied)

AM Loop Antenna

(supplied)

Installation and Setup

HDMI Connection

About HDMI

HDMI (High Definition Multimedia Interface) supports

both video and audio on a single digital connection for an

easy all- digital output to an HDMI or DI-equipped TV.

Connection to an HDMI TV requires an HDMI cable

while connection to a DVI-equipped TV requires a DVI

adapter besides a HDMI cable.

HDMI has the capability to support standard,

enhanced, or high-definition video plus standard to

multi-channel surround-sound audio, HDMI features

include uncompressed digital video, a bandwidth of up

to 5 gigabytes per second, one connector (instead of

several cables and connector), and communication

between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI licensing LLC.

If you have a HDMI TV or monitor, you can connect

it to this DVD/CD Receiver using a HDMI cable.

1. Connect the HDMI OUT jack on the DVD/CD

Receiver to the HDMI jack on a HDMI compatible

TV or monitor (H).

2. Set the TV’s source to HDMI (refer to owner’s

manual for TV).

Notes:

• The arrow on the cable connector body should face

down for correct alignment with the connector on

the DVD/CD Receiver.

• If there is noise or there are lines

on the screen, please check

the HDMI cable.

• Not all HDCP-compatible

DVI devices will work with

this DVD/CD Receiver.

• If TV does not support HDCP, snow noise appears

on the screen, or picture may be vibrated.

If you play the multi-channel software such as Dolby

Digital or DTS, only PCM signals can be output via

an HDMI cable.

Resolution setting

You can change the resolution for component video

and HDMI output.

To change the resolution using setup menu to select

the desired resolution - Auto, 480i (or 576i), 480p (or

576p), 720p, 1080i, 1080p.

Available resolution according to connection

HDMI OUT - Auto, 1080p, 1080i, 720p and 480p

(or 576p)

COMPONENT VIDEO OUT - 480p (or 576p) and 480i

(or 576i)

VIDEO OUT - 480i (or 576i)

Note:

If your TV does not accept your resolution setting,

abnormal picture appears on the screen.

Please read owner’s manual for TV, and then set the

resolution that your TV can accept.

HDMI

HDMI compatible TV

Rear of DVD/CD Receiver

Speaker System Connection

Connect the speakers using the supplied speaker

cables.

To obtain the best possible surround sound, adjust the

speaker parameters (volume, distance, etc.).

Notes:

• Be sure to match the speaker cable to the

appropriate terminal on the components: + to + and

– to –. If the cables are reversed, the sound will be

distorted and will lack base.

• If you use front speakers with low maximum input

rating, adjust the volume carefully to avoid

excessive output on the speakers.

Caution:

• The left and right speakers can be installed on a

wall.

• When installing the speakers on a wall, be sure to

have the speakers installed by qualified personnel.

• DO NOT install the speakers on the wall by yourself

to avoid unexpected damage from them falling off

the wall due to incorrect installation or weakness in

wall structure.

• Care must be taken in selecting a location for

speaker installation on a wall. Injury to personnel or

damage to devices may result if the installed

speakers interfere with daily activities.

Front speaker

(Right)

Front speaker

(Left)

Center speaker

Rear speaker

(Right surround)

Subwoofer

Rear speaker

(Left surround)

Connecting the front speakers

Assembling the speakers

Before assembling —

• Prepare a Phillips screwdriver (not supplied).

• Take care not to drop any component part while

assembling; otherwise, it may cause damage to the

floor or injury.

Installation and Setup

Front speaker

(SP-TH60F)(2)

Stand (2) Base plate (2)

Assembled speakers

With stand: Refer to

steps 1 to 3.

Without stand: Refer to

steps 2 and 3.

Speaker

Stand

Screw M5 x 40 mm/M5 x 1-

5/8 inches (supplied)

Speaker

Stand (or speaker

directly)*

A: Use these screws (M4 x

45 mm/M4 x 1-13/16

inches) when assembling

the speaker with the base

plate.

Base plate

Screw M4 x 20

mm/M4 x 13/16

inches

(supplied)*

* When assembling the speaker with the base plate,

use the screws A.

Red

Black

White

Black

You can route the speaker

cord by using speaker cord

clamp (supplied).

When assembling a speaker without stand:

Displaying Disc Information

on-screen

You can display various information about the disc

loaded on-screen.

1. Press DISPLAY to show various playback

information.

The displayed items differ depending on the disc

type or playing status.

2. You can select an item by pressing v / V and

change or select the setting by pressing b / B.



Title – Current title number/ total number of

titles.



Chapter – Current chapter number/total number

of chapters.



Time – Elapsed playing time.



Audio – Selected audio language or channel.



Subtitle – Selected subtitle.



Angle – Selected angle/total number of angles.



Sound – Selected sound mode.

Note:

If any button is not pressed for a few seconds, the on-

screen display disappears.

Initial Settings

By using the Setup menu, you can make various

adjustments to items such as picture and sound.

You can also set a language for the subtitles and the

Setup menu, among other things. For details on each

Setup menu item, see pages 12 to 16.

OSD Initial language settings:

When the POWER is turned on for the first time, the

unit need to set the menu language. Follow the

descriptions below after the display connections. After

OSD Initial language setting, to set Area code (see

page 15)

1. Press POWER to turn the unit on. The language

setup menu will appear on the screen.

2. Use b / B / v / V to select a language then press

ENTER. The confirm menu will appear.

3. Use b / B to select the [Enter] then press ENTER

to finish the language setup.

To display and exit the Menu:

Press SETUP to display the menu. A second press of

SETUP will take you back to initial screen.

To go to the next level:

Press B on the remote control.

To go back to the previous level:

Press b on the remote control.

Installation and Setup

General Operation

1. Press SETUP.

The Setup menu appears.

2. Use v / V to select the desired option then press

B to move to the second level. The screen shows

the current setting for the selected item, as well as

alternate setting(s).

3. Use v / V to select the second desired option and

then press B to move to the third level.

4. Use v / V to select the desired setting then press

ENTER to confirm your selection.

Some items require additional steps.

5. Press SETUP or PLAY (N) to exit the Setup

menu.

LANGUAGE

OSD

Select a language for the Setup menu and then on-

screen display.

Disc Audio / Subtitle / Menu

Select the language you prefer for the audio track

(disc audio), subtitles, and the disc menu.

Original – Refers to the original language in which

the disc was recorded.

Other – To select another language, press

numeric buttons and then ENTER to enter the

corresponding 4-digit number according to the

language code list on the page 26. If you enter the

wrong language code, press CLEAR.

DISPLAY

TV Aspect

4:3 – Select when a standard 4:3 TV is connected.

16:9 – Select when a 16:9 wide TV is connected.

Display Mode

The Display Mode setting works only when the TV

Aspect mode is set to 4:3.

Letterbox – Displays a wide picture with bands on

the upper and lower portions of the screen.

Panscan – Automatically displays the wide picture

on the entire screen and cuts off the portions that

do not fit. (If the disc/file is not compatible with

Pan Scan, the picture is displayed at Letterbox

ratio.)

TV Output Select

Select an option according to the TV connection type.

YPbPr - When your TV is connected with the

COMPONENT/PROGRESSIVE

SCAN jacks on the unit.

RGB - When your TV is connected with the

SCART jack.

Note:

S-Video Signal thruogh the SCART jack is not

supported.

Video Resolution

Use vV to select the desired resolution then press

ENTER to confirm your selection.

Full HD up-scaling convert SD(Standard Definition)

resolution into HD (High Definition) resolution.

The number in 480p (or 576p), 720p, 1080p and

1080i indicates the number of lines of video. The “i”

and “p” indicate interlaced and progressive scan,

respectively.

Auto - If you HDMI jack is connected for TVs

providing display information (EDID), automatically

selects the resolution best suited to the connected

TV (1080p, 1080i, 720p or 480p (or 576p)). (only for

HDMI connection)

1080p - Outputs 1080 lines of progressive video.

(only for HDMI connection)

1080i - Outputs 1080 lines of interlaced video.

720p - Outputs 720 lines of progressive video.

480p (or 576p) - Outputs 480 (or 576) lines

progressive video.

480i (or 576i) - Outputs 480 (or 576) lines of

interlaced video.

Notes on Video Resolution

• Only resolutions supported by the TV are available.

• Depending on your TV, certain HDMI output

resolutions may not work.

• If your TV does not accept your resolution setting, an

abnormal picture appears on the screen. Please

read TV’s owner’s manual then set the resolution

that your TV can accept.

• If the HDMI jack is connected for TVs providing

display information (EDID), you can not select

resolutions that the TV does not accept.

AUDIO

Each DVD disc has a variety of audio output options.

Set the player’s AUDIO options according to the type

of audio system you use.

Dynamic Range Control (DRC)

With the DVD*

format, you can hear a program’s

soundtrack in the most accurate and realistic

presentation, thanks to digital audio technology.

However, you may wish to compress the dynamic

range of the audio output (the difference between the

loudest sounds and the quietest ones). Then, you may

listen to a movie at a lower volume without losing

clarity of sound. Set DRC to On for this effect.

*1: Dolby Digital only

Vocal

Set Vocal to On only when a multi-channel karaoke

DVD is playing. The karaoke channels on the disc will

mix into normal stereo sound.

HD AV Sync

When using Digital TV.

Sometimes AV signal could not be transmitted

simultaneously because of later transmission of video

signal compared to audio signal.

Because it takes some time to convert analogue video

signal to digital one in the Digital TV.

And It means that you may not enjoy picture on the

screen and sound from speaker at the same time

even though it is one scene.

In the HD AV Sync menu, you could adjust delay time

to audio signal for simultaneous AV signal

transmission



Delay time could be set up with 10msec unit.

(0 ~ 300ms)



Delay time is different according to each TV Brand.

So you need to adjust optimal delay time complying

with your TV.

Installation and Setup

5.1 Speaker Setup

Make the following settings for the built-in 5.1 channel

surround decoder.

1. Press ENTER, and the 5.1 Speaker Setup menu

appears.

2. Use b / B to select the desired speaker.

3. Adjust options using v / V / b / B buttons.

4. Press ENTER to confirm your selection. Returns to

the previous menu.

Speaker selection

Select a speaker that you want to adjust. [Front

speaker (Front L), Front speaker (Front R), Center

Speaker (Center), Subwoofer (SubWoofer), Rear

speaker (Rear L), Rear speaker (Rear R)]

Note:

Certain speaker settings are prohibited by the Dolby

Digital licensing agreement.

Size

Since the speaker settings are fixed, you cannot

change the settings.

Volume

Press b / B to adjust the output level of the selected

speaker. (-5dB ~ 5dB)

Distance

After you connected speakers to your DVD Receiver,

set the Distance between the speakers and your

listening point if the distance of Center or Rear

speakers is bigger than the distance of Front

speakers. This allows the sound from each speaker to

reach the listener at the same time.

Press b / B to adjust the Distance of the selected

speaker. This distance is equivalent to a difference of

the distance between Center or Rear speaker and

Front speakers.

Note:

You can’t adjust Front/Woofer speakers.

The distance of Front speaker is considered to be the

standard.

Test

Press b / B to test the signals of each speaker. Adjust

the volume to match the volume of test signals

memorized in the system.

Front Left (Front L) → Center→ Front Right (Front R)

→ Rear Right (Rear R) → Rear Left (Rear L) →

SubWoofer

LOCK (Parental Control)

Initial Setting the Area Code:

See the Area Codes on page 26.

1. Select the LOCK menu and then press B.

2. To access the LOCK options, you must input the

password you have created. Input a password and

press ENTER. Enter it again and press ENTER to

verify. If you make a mistake before pressing

ENTER, press CLEAR.

3. Select the first character using v / V buttons.

4. Press B and select the second character using

v / V buttons.

5. Press ENTER to confirm your Area code selection.

Rating

Blocks playback of rated DVDs based on their

contents. Not all discs are rated.

1. Select “Rating” on the LOCK menu then press B.

2. Input a password and press ENTER.

3. Select a rating from 1 to 8 using the v / V buttons.

Rating 1-8: Rating one (1) has the most restrictions

and rating eight (8) is the least restrictive.

Unlock: If you select unlock, parental control is

not active and the disc plays in full.

4. Press ENTER to confirm your rating selection, then

press SETUP to exit the menu.

Password

You can enter or change password.

1. Select Password on the LOCK menu and then

press B.

2. Follow the step 2 as shown above (Rating).

To change the password, press ENTER when the

“Change” option is highlighted. Input a password

and press ENTER. Enter it again and press

ENTER to verify.

3. Press SETUP to exit the menu.

If you forget your password

If you forget your password, you can clear it using the

following steps:

1. Press SETUP to display the Setup menu.

2. Input the 6-digit number “210499” and press

ENTER. The password is cleared.

Area Code

Enter the code of the area whose standards were

used to rate the DVD video disc, based on the list on

page 26.

1. Select “Area Code” on the LOCK menu then

press B.

2. Follow the step 2 as shown previous paragraph

(Rating).

3. Select the first character using v / V buttons.

4. Press B and select the second character using

v / V buttons.

5. Press ENTER to confirm your Area code selection.

OTHERS

PBC

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to

the PBC.

Off: Video CDs with PBC are played in the same

way as Audio CDs.

DivX(R) Registration

We provide you the DivX

VOD (Video On Demand)

registration code that allows you to rent and purchase

videos based on the DivX

VOD service. For more

information, visit www.divx.com/vod.

1. Select “DivX(R) Registration” option and then

press B.

2. Press ENTER while “Select” is selected and the

registration code will appear.

Use the registration code to purchase or rent the

videos from DivX

VOD service at

www.divx.com/vod. Follow the instructions and

download the video onto a disc for playback on

this unit.

3. Press ENTER to exit.

Note:

All the downloaded videos from DivX

VOD can only

be played back on this unit.

Operation

General features

Buttons Operations

Z (OPEN / CLOSE) Opens or closes the disc tray.

X (PAUSE) During playback, press X to pause playback.

Press X repeatedly to play Frame-by-Frame.

SKIP (. / >) During playback, press SKIP (. or >) to go to the next

chapter/track or to return to the beginning of the current

chapter/track.

Press SKIP . twice briefly to step back to the previous

chapter/track.

SCAN (m / M) During playback, press SCAN (m or M) repeatedly to

select the required scan speed.

DVD : bb, bbb, bbbb, bbbbb, bbbbbb

BB, BBB, BBBB, BBBBB, BBBBBB

DivX disc, Video CD : bb, bbb, bbbb, bbbbb

BB, BBB, BBBB, BBBBB

WMA/MP3, Audio CD : m (X2, X4, X8) or M (X2, X4, X8)

REPEAT During playback, press REPEAT repeatedly to select a

desired repeat mode.

DVD Video discs: Chapter/Title/Off

Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off

TOP MENU If the current DVD title has a menu, the title menu appears

on the screen. Otherwise, the disc menu may appears.

MENU The disc menu appears on the screen.

(SUBTITLE) During playback, press SUBTITLE repeatedly to select a

desired subtitle language.

SLOW

In the pause mode, press SCAN (m or M) to select the

required speed.

DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)

Video CD : T (1/2, 1/4, 1/8, 1/16)

Discs

VCDDVD

DivXDVD

DVD

ALL

WMA

MP3ACD

DivXVCDDVD

ALL

DivXVCDDVD

ALL

Additional features

Time Search

To start playing at any chosen time on the disc:

1. Press DISPLAY during playback.

2. Press v / V to select the time clock icon and

“--:--:--” appears.

3. Input the required start time in hours, minutes, and

seconds from left to right. If you enter the wrong

numbers, press CLEAR to remove the numbers

you entered. Then input the correct numbers.

4. Press ENTER to confirm. Playback starts from the

selected time.

1.5 times speed playback

You can play at 1.5 times speed.

The 1.5 speed allows you to watch the pictures and

listen to the sound quicker than playing at a normal

speed on the disc.

1. During playback, press PLAY(B) to play at 1.5

times speed. “BX1.5” appears on the screen.

2. Press PLAY(B) again to exit.

Screen Saver

The screen saver appears when you leave the unit in

Stop mode for about five minutes. To cancel the

Screen Saver, press any button and then operate the

unit.

Last Scene Memory

This receiver memorizes the last scene from the last

disc that is viewed. The last scene remains in the

memory even if you remove the disc from the receiver

or switch off the receiver. If you load a disc that has

the scene memorized, the scene is automatically

recalled.

Note:

This receiver does not memorize the scene of a disc if you

switch off the receiver before commencing to play the disc.

Mixed disc or USB Flash drive – MP3/WMA and

JPEG

When playing a disc or USB Flash drive contained with

MP3/WMA and JPEG files together, you can select

which menu of files you would like to play by pressing

TOP MENU.

System Select

You must select the an appropriate system mode for

your TV system. If NO DISC appears in the display

window, press and hold PAUSE/STEP (X) remote

control for more than 5 seconds to be able to select a

system (PAL, NTSC).



When the selected system is not compatible with

the system of your TV, normal colour picture may not

be displayed.

NTSC: Select when DVD/CD Receiver is connected

with NTSC-TV.

PAL: Select when DVD/CD Receiver is connected

with PAL-TV.

DVD

WMA

MP3ACDVCDDVD

DVD

Operation

Playing an Audio CD or

MP3/WMA file

This unit can play Audio CDs or MP3/WMA files.

MP3/ WMA/ Audio CD

Once you insert an MP3/WMA files recording media or

Audio CD a menu appears on the TV screen.

Press v / V to select a track/file and then press PLAY

or ENTER, and playback starts. You can use variable

playback functions. Refer to the page 17.

ID3 TAG

When playing a file containing information such as

track titles, you can see the information by pressing

DISPLAY. (Song, Artist, Album, Genre, Comment)

Tips:

Press MENU to move to the next page.

MP3 / WMA disc compatibility with this player is

limited as follows:

• Sampling frequency: within 32 - 48 kHz (MP3),

within 24 - 48kHz (WMA)

• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps

(WMA)

• The DVD/CD Receiver cannot read an MP3/WMA file

that has a file extension other than “.mp3” / “.wma”.

• CD-R physical format should be ISO 9660

• If you record MP3 / WMA files using software that

cannot create a file system (eg. Direct-CD) it is

impossible to playback MP3 / WMA files.We recommend

that you use Easy-CD Creator, which creates an ISO

9660 file system.

• File names should have a maximum of 8 letters and

must incorporate an .mp3 or .wma extension.

• They should not contain special letters such as / ? * : “

< > l etc.

• The total number of files on the disc should be less than

999.

This DVD/CD Receiver requires discs and recordings to

meet certain technical standards in order to achieve

optimal playback quality. Pre-recorded DVDs are

automatically set to these standards. There are many

different types of recordable disc formats (including CD-R

containing MP3 or WMA files) and these require certain

pre-existing conditions (see above) to ensure compatible

playback.

Customers should note that permission is required in

order to download MP3 / WMA files and music from

the Internet. Our company has no right to grant such

permission. Permission should always be sought from

the copyright owner.

Programmed Playback

The program function enables you to store your

Favourite tracks from any disc in the receiver memory.

A program can contain 300 tracks.

1. Insert a disc.

Audio CD and MP3/WMA Discs:

2. Select a track on the “List” and then press PROG.

or select “ (Add)” icon and then press ENTER

to place the selected track on the “Program” list.

Repeat to place additional tracks on the list.

Note:

You can add all tracks in the disc. Select “

(

Add All)” icon

then press ENTER.

3. Select the track you want to start playing on the

“Program” list. Press MENU to move to the next

page.

4. Press PLAY or ENTER to start. Playback begins in

the order in which you programmed the tracks.

Playback stops after all of the tracks on the

“Program” list have played once.

5. To resume normal playback from programmed

playback, select a track of AUDIO CD (or

MP3/WMA) list and then press PLAY.

Repeat Programmed Tracks

1. Press REPEAT when playing a disc. The repeat

icon appears.

2. Press REPEAT to select a desired repeat mode.

• TRACK: repeats the current track

• ALL: repeats all the tracks on programmed list.

• Off (No display): does not play repeatedly.

Erasing a Track from “Program” List

1. Use vVto select the track that you wish to erase

from the Program list.

2. Press CLEAR. Alternatively, select “ (Delete)”

icon then press ENTER to place the selected track

on the Program list. Repeat to erase additional

tracks on the list.

Erasing the Complete Program List

Use v / V to select “ (Del all)” and then press

ENTER.

Note:

The programs are also cleared when the disc is removed,

the unit is switched to power off or the function is switched to

others.

Operation

Viewing a JPEG file

This unit can play discs with JPEG files.

Before playing JPEG recordings, read the notes on

JPEG Recordings on the right.

1. Insert a disc and close the tray.

The PHOTO menu appears on the TV screen.

2. Press v / V to select a folder, and then press

ENTER. A list of files in the folder appears.

If you are in a file list and want to return to the

previous Folder list, use the v / V buttons on the

remote to highlight and press ENTER.

3. If you want to view a particular file, press v / V to

highlight a file and press ENTER or PLAY. While

viewing a file, you can press STOP to move to the

previous menu (JPEG menu).

Tips:



There are four Slide Speed options :

> (Slow), >> (Normal), >>> (Fast) and II (off).

Use v /V /b /B to highlight the Speed. Then, use b / B

to select the option you want to use and then press

ENTER.



If you set Speed option to Off, the slide is not active.

Slide Show

1. Highlight the file (not folder) which you like

beginning to slide show.

2. Select the slide speed. (Refer to the tips this page)

3. Use vVbBto highlight the (Slide Show)

then press ENTER.

Note:

•

The sequence of slide show is from top to down, cannot

be reverse.

• Slide show cannot repeat automatically, you could start the

slide show again manually.

Still Picture

1. Press PAUSE/STEP during the slide show.

The DVD/CD Receiver will now go into the PAUSE

mode.

2. To return to the slide show, press PLAY or press

PAUSE/STEP again.

Moving to another File

Press SKIP (. or >) once during viewing a

picture to advance to the next or previous file.

Rotating the picture

Press vVbB during showing a picture to rotate the

picture clockwise or counter-clockwise.

JPEG disc compatibility with this player is

limited as follows:

• Depending upon the size and the number of

JPEG files, it could take a long time for the

DVD/CD Receiver to read the disc’s contents. If

you don’t see an on-screen display after several

minutes, some of the files may be too large —

reduce the resolution of the JPEG files to less

than 2M pixels as 2760 x 2048 pixels and burn

another disc.

• The total number of files and folders on the disc

should be less than 999.

• Some discs may not operate due to a different

recording format or the condition of disc.

• Ensure that all the selected files have the “.jpg”

extensions when copying into the CD layout.

• If the files have “.jpe” or “.jpeg” extensions, please

rename them as “.jpg” file.

• File names without “.jpg” extension will not be

able to be read by this DVD/CD Receiver. Even

though the files are shown as JPEG image files in

Windows Explorer.

Playing a DivX Movie

file

Using this DVD/CD Receiver you can play DivX disc.

1. Insert a disc and close the tray. The MOVIE menu

appears on the TV screen.

2. Press v / V to select a folder and then press

ENTER. A list of files in the folder appears. If you

are in a file list and want to return to the Folder

list, use the v / V buttons on the remote to

highlight and press ENTER.

3. If you want to view a particular file, press

v / V to highlight a file and press ENTER or PLAY.

4. Press STOP to exit.

Notice for displaying the Divx subtitle

If the subtitle does not display properly during playback,

press and hold S-TITLE for about 3 seconds then press

S-TITLE to select another language code until the

subtitle is displayed properly

Tips:

Press MENU to move to the next page.

Notes:



Be sure to select “SUBTITLE ON” mode by

pressing the subtitle file every time before playing a

DivX file .



When the subtile has more than two languages in

the file, original subtile is only available.

DivX disc compatibility with this player is limited

as follows:

• Available resolution size of the DivX file is under

800x600 (W x H) pixel.

• The file name of the DivX subtitle is available by

45 characters.

• If there is impossible code to express in the DivX

file, it may be displayed as " _ " mark on the

display.

• If the number of the screen frame is over 30

per 1 second, this unit may not operate

normally.

• If the video and audio structure of recorded

files are not interleaved, either video or audio

is outputted.

Playable DivX file

• ".avi ", ".mpg ", ".mpeg ", ".divx"

Playable Subtitle format

• SubRip(*.srt/*.txt)

SAMI(*.smi)

SubStation Alpha(*.ssa/*.txt)

MicroDVD(*.sub/*.txt)

SubViewer 2.0(*.sub/*.txt)

VobSub(*.sub)

Playable Codec format

• "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ",

"MP43 ", "3IVX ".

Playable Audio format

"AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".

• Sampling frequency: within 32 - 48 kHz (MP3),

within 24 - 48kHz (WMA)

• Bit rate: within 32 - 320kbps (MP3),

40 - 192kbps (WMA)

Operation

Presetting the Radio Stations

You can preset 50 stations for FM and AM (MW).

Before tuning, make sure that you have turned down

the volume.

1. Press FUNCTION on the remote control until FM

or AM (MW) appears in the display window.

2. And then every time you press FUNCTION, FM

and AM (MW) changes alternately.

3. Press and hold TUNING.(-/+) for about two

seconds until the frequency indication starts to

change, then release.

Scanning stops when the DVD/CD Receiver tunes in a

station.

4. Press PROG./MEMO. on the remote control.

A preset number will flash in the display window.

5. Press PRESET (-/+) on the remote control to

select the preset number you want.

6. Press PROG./MEMO. on the remote control again.

The station is stored.

7. Repeat steps 3 to 6 to store other stations.

To tune in a station with a weak signal

Press TUNING.(-/+) repeatedly in step 3 to tune in the

station manually.

To clear all the stored stations

Press and hold PROG./MEMO. for about two seconds

and “ERASE ALL” is appeared in the display window

and then press PROG./MEMO. again, the stations are

cleared.



If you have accidentally entered into the "ERASE

ALL" mode and you do not wish to clear the

memory, do not press any key. After a few seconds,

"ERASE ALL" will go off by itself and change to

normal mode.

Note:

If all stations have already been entered, the FULL

message will appear in the display window for a

moment and then a preset number will flash.

To change the preset number, follow the steps 5-6 as

above.

Listening to the Radio

Preset radio stations in the DVD/CD Receiver’s

memory first (see “Presetting radio stations” on the

left).

1. Press FUNCTION until FM or AM (MW) appears in

the display window.

The last received station is tuned in.

2. Press PRESET (-/+) repeatedly on the remote

control to select the preset station you want.

Each time you press the button, the DVD/CD Receiver

tunes in one preset station at a time.

3. Adjust the volume by rotating VOLUME on the

front panel or by pressing VOLUME + or - on the

remote control repeatedly.

To turn off the radio

Press POWER to turn the DVD/CD Receiver off or

select another function mode.

To listen to non-preset radio stations



Use manual or automatic tuning in the step 2.



For manual tuning, press TUNING.(-/+) repeatedly.



For automatic tuning, press and hold TUNING.(-/+)

for about two seconds on the front panel.

To select a preset radio station directly

You can use the number buttons on the remote

control to select a preset radio station directly.

For example, to listen to the preset station 4, press 4

on the remote control. To listen to the preset station

19, press 1 and then 9 (within 3 seconds).

For your reference



If an FM program is noisy

Press FM MODE. on the front panel or on the

Remote Control to make “MONO” appear in the

display window. There will be no stereo effect, but

the reception will improve. Press the button again

to restore the stereo effect.



To improve reception

Reorient the supplied antennas.

RDS Operation

This unit is equipped with RDS (Radio Data System),

which brings a wide range of information to FM radio.

RDS, now being used in many countries, is a system

for transmitting station call signs or network

information, a description of station programme type

text message about the station or specifics of musical

selection and the correct time.

RDS TUNING

When a FM station is tuned in and it contains RDS

data, the unit will automatically display the station’s

call sign and the RDS indicator will light in the Display

Window as well as indicators for the RDS services

programme (PS), programme type recognition (PTY),

Radio text (RT) and Clock Time (CT) if transmitted by

the station.

RDS DISPLAY OPTIONS

The RDS system is capable of transmitting a wide

variety of information in addition to the initial call sign

that appears when a station is first tuned. In normal

RDS operation the display will indicate the station

name, broadcast network or call letters. Pressing RDS

DISPLAY on the remote control enables you to cycle

through the various data types in the sequence:

(PS

↔↔

FREQUENCY

↔↔

PTY

↔↔

CT)



PS (Programme Service name)- The name of the

channel is shown in the Display Window.



PTY (Programme type recognition)- The name of

the programme type is shown in the Display

Window.



RT (Radiotext)- A “text” message contains special

information from the broadcast station. Note that

this message may scroll across the display to

permit message.



CT (Time controlled by the channel)- Enables

the unit to receive the actual time and show it in

the Display Window.

Note:

Some RDS stations may not choose to include some

of these additional features. If the data required for

the selected mode is not being transmitted, the

Display Window will show a PTY NONE, RT NONE,

CT NONE, or PS NONE message.

NEWS News

AFFAIRS Current Affairs

INFO Information

SPORT Sports

EDUCATE Educational

DRAMA Drama

CULTURE Culture

SCIENCE Science

VARIED Varied Speech Programme

POP M Popular Music

ROCK M Rock Music

EASY M Easy Listening Music

LIGHT M Light Music

CLASSICS Classical Music

OTHER M Other Music

WEATHER Weather Information

FINANCE Financial Programmes

CHILDREN Children’s Programmes

SOCIAL Social Affairs Programmes

RELIGION Religious Broadcasts

PHONE IN Phone-In Programmes

TRAVEL Travel and Touring

LEISURE Leisure and Hobby

JAZZ Jazz Music

COUNTRY Country Music

NATION M National Music

OLDIES Oldies Music

FOLK M Folk Music

DOCUMENT Documentary Programmes

TEST Station Alarm Test Message

ALARM ! Emergency Broadcast Information

Programme Search (PTY)

A major benefit of RDS is its ability to encode

broadcasts with Programme Type (PTY) codes that

indicate the type of material being broadcast. The

following list shows the abbreviations used to

indicate each PTY along with an explanation of the

PTY.

You may search for a specific Programme Type (PTY)

by following these steps:

1. Press FUNCTION to select the FM mode.

2. Press PTY SEARCH on the remote control, the

display will show the last PTY in use.

3. Press PTY SEARCH repeatedly to select a

desired PTY.

4. When the PTY is selected, press TUNING (

The unit will go into an automatic search mode.

When a station is tuned, the search will stop.

Operation

Sleep Timer Setting

You can set the DVD/CD Receiver to turn off

automatically at a specified time.

1. Press SLEEP to set the desired sleep time.

The SLEEP indicator and the sleep time appears in the

display window.

2. Each time you press SLEEP the setting

changes in the following order.

SLEEP 180 →150 →120→90 →80 →70 →60→50 →

40 →30 →20 →10 →OFF (No display)

Note:

You can check the remaining time before the DVD/CD

Receiver turns off.

Press SLEEP. The remaining time appears in the

display window.

Dimmer

This function will change the brightness of the display

window on the front panel during in power-on status.

Press the DIMMER repeatedly.

Muting

Press MUTING to mute your unit.

You can mute your unit in order, for example, to

answer the telephone, the “MUTING” indicator flashes

in the display window.

Note:

This muting doesn’t affect the audio output to HDMI; it

only mutes the output of speakers connected to the

unit.

Setting the disc ejection lock

You can lock the disc tray to prevent the disc form

being ejected.

When the main unit is turned off, hold down the STOP

key at the front panel for 5 seconds

If you attempt to open the disc tray by pressing

OPEN/CLOSE key, the disc tray does not open and

“LOCKED” appears in the display window.

To cancel the disc ejection lock, hold down the STOP

key at the front panel for 5 seconds again when the

main unit is turned off.

“UNLOCKED” is displayed in the display window.

Note:

Before the main unit is turned off, DVD/CD function

should be selected.

Enjoying audio form an external

source

You can enjoy audio form an external source through

your unit.

Press INPUT repeatedly to select the desired input

source. - AUX, AUX OPT, TV-AUDIO, AUDIO IN, USB

Setting the surround mode

You can select the Dolby Pro Logic II. Press

SURROUND to change surround mode repeatly.

[BYPASS] mode : Software with multichannel

surround audio signals is played according to the

way it was recorded.

[PL II MOVIE] mode: The Movie mode is for use

with stereo television shows and all programs

encoded in Dolby Surround. The result is enhanced

soundfield directionality that approaches the quality

of discrete 5.1-channel sound.

[PL II MUSIC] mode: The Music mode is for use

with any stereo music recordings.

[PL II MATRIX] mode: The Matrix mode is the same

as the Music mode except that the directional

enhancement logic is turned off. It may be used to

enhance mono signals by making them seem

“larger.” The Matrix mode may also find use in auto

systems, where the fluctuations from poor FM

stereo reception can otherwise cause disturbing

surround signals from a logic decoder. The ultimate

“cure” for poor FM stereo reception may be simply

to force the audio to mono.

Notes:

•

In some of surround modes, some speakers maybe

no sound or low sound, it depends on the mode of

surround and the source of audio, it is not defective.

•You may need resetting the surround mode, after

switch the input, sometimes even after the sound

track changed.

Area Code

Afghanistan AF

Argentina AR

Australia AU

Austria AT

Belgium BE

Bhutan BT

Bolivia BO

Brazil BR

Cambodia KH

Canada CA

Chile CL

China CN

Colombia CO

Congo CG

Costa Rica CR

Croatia HR

Czech Republic CZ

Denmark DK

Ecuador EC

Egypt EG

El Salvador SV

Area Code

Ethiopia ET

Fiji FJ

Finland FI

France FR

Germany DE

Great Britain GB

Greece GR

Greenland GL

Heard and McDonald Islands

Hong Kong HK

Hungary HU

India IN

Indonesia ID

Israel IL

Italy IT

Jamaica JM

Japan JP

Kenya KE

Kuwait KW

Libya LY

Luxembourg LU

Area Code

Malaysia MY

Maldives MV

Mexico MX

Monaco MC

Mongolia MN

Morocco MA

Nepal NP

Netherlands NL

Netherlands Antilles AN

New Zealand NZ

Nigeria NG

Norway NO

Oman OM

Pakistan PK

Panama PA

Paraguay PY

Philippines PH

Poland PL

Portugal PT

Romania RO

Russian Federation RU

Area Code

Saudi Arabia SA

Senegal SN

Singapore SG

Slovak Republic SK

Slovenia SI

South Africa ZA

South Korea KR

Spain ES

Sri Lanka LK

Sweden SE

Switzerland CH

Taiwan TW

Thailand TH

Turkey TR

Uganda UG

Ukraine UA

United States US

Uruguay UY

Uzbekistan UZ

Vietnam VN

Zimbabwe ZW

Area Codes

Choose a area code from this list.

Language Code

Abkhazian 6566

Afar 6565

Afrikaans 6570

Albanian 8381

Ameharic 6577

Arabic 6582

Armenian 7289

Assamese 6583

Aymara 6588

Azerbaijani 6590

Bashkir 6665

Basque 6985

Bengali; Bangla 6678

Bhutani 6890

Bihari 6672

Breton 6682

Bulgarian 6671

Burmese 7789

Byelorussian 6669

Cambodian 7577

Catalan 6765

Chinese 9072

Corsican 6779

Croatian 7282

Czech 6783

Danish 6865

Dutch 7876

English 6978

Esperanto 6979

Estonian 6984

Faroese 7079

Language Code

Fiji 7074

Finnish 7073

French 7082

Frisian 7089

Galician 7176

Georgian 7565

German 6869

Greek 6976

Greenlandic 7576

Guarani 7178

Gujarati 7185

Hausa 7265

Hebrew 7387

Hindi 7273

Hungarian 7285

Icelandic 7383

Indonesian 7378

Interlingua 7365

Irish 7165

Italian 7384

Japanese 7465

Javanese 7487

Kannada 7578

Kashmiri 7583

Kazakh 7575

Kirghiz 7589

Korean 7579

Kurdish 7585

Laothian 7679

Latin 7665

Latvian, Lettish 7686

Language Code

Lingala 7678

Lithuanian 7684

Macedonian 7775

Malagasy 7771

Malay 7783

Malayalam 7776

Maltese 7784

Maori 7773

Marathi 7782

Moldavian 7779

Mongolian 7778

Nauru 7865

Nepali 7869

Norwegian 7879

Oriya 7982

Panjabi 8065

Pashto, Pushto 8083

Persian 7065

Polish 8076

Portuguese 8084

Quechua 8185

Rhaeto-Romance 8277

Rumanian 8279

Russian 8285

Samoan 8377

Sanskrit 8365

Scots Gaelic 7168

Serbian 8382

Serbo-Croatian 8372

Shona 8378

Sindhi 8368

Language Code

Singhalese 8373

Slovak 8375

Slovenian 8376

Somali 8379

Spanish 6983

Sudanese 8385

Swahili 8387

Swedish 8386

Tagalog 8476

Tajik 8471

Tamil 8465

Tatar 8484

Telugu 8469

Thai 8472

Tibetan 6679

Tigrinya 8473

Tonga 8479

Turkish 8482

Turkmen 8475

Twi 8487

Ukrainian 8575

Urdu 8582

Uzbek 8590

Vietnamese 8673

Volapük 8679

Welsh 6789

Wolof 8779

Xhosa 8872

Yiddish 7473

Yoruba 8979

Zulu 9085

Language Codes

Use this list to input your desired language for the following initial settings:

Disc Audio, Disc Subtitle, Disc Menu.

Reference

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Symptom

No power.

The power is on, but

the DVD/CD Receiver

does not work.

No picture.

There is no sound or

only a very low-level

sound is heard.

The playback picture is

poor.

The DVD/CD Receiver

does not start playback.

Loud hum or noise is

heard.

Cause

• The power cord is disconnected.

• No disc is inserted.

• The TV is not set to receive DVD signal

output.

• The video cable is not connected

securely.

• The connected TV power is turned off.

• The equipment connected with the

audio cable is not set to receive DVD

signal output.

• The audio cables are not connected

securely.

• The power of the equipment connected

with the audio cable is turned off.

• The audio connecting cable is damaged.

• The disc is dirty.

• No disc is inserted.

• An unplayable disc is inserted.

• The disc is placed upside down.

• The disc is not placed within the guide.

• The disc is dirty.

•Amenu is on the TV screen.

• The Rating level is set.

• The disc is dirty.

• The speakers and components are

connected poorly.

• The DVD/CD Receiver is located too

close to the TV.

Correction

• Plug the power cord securely into the

wall outlet.

• Insert a disc. (Check that the DVD or,

audio CD indicator in the DVD display

is lit.)

• Select the appropriate video input

mode on the TV so the picture from

the DVD/CD Receiver appears on the

TV screen.

• Connect the video cable into the

jacks securely.

•Turn on the TV.

• Select the correct input mode of the

audio receiver so you can hear the

sound from the DVD/CD Receiver.

• Connect the audio cable into the

jacks securely.

•Turn on the equipment connected

with the audio cable.

• Replace it with new one.

• Clean the disc.

• Insert a disc. (Check that the DVD, or

audio CD indicator in the DVD display

is lit.)

• Insert a playable disc. (Check the

disc type, colour system and Regional

code.)

• Place the disc with the playback side

down.

• Place the disc on the disc tray

correctly inside the guide.

• Clean the disc.

• Press the SETUP button to turn off

the menu screen.

• Cancel the Rating function or change

the rating level.

• Clean the disc.

• Connect the speakers and

components securely.

• Move your TV away from the audio

components.

Supplied Accessories

FM Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x1

AM Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x1

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . .x1

In the package of SP-THG60

Speaker cable . . . . . . . . . . . . . . . . . . . . . . . . . . .x6

Speaker cord clamp . . . . . . . . . . . . . . . . . . . . . .x2

Video RCA cable . . . . . . . . . . . . . . . . . . . . . . . . .x1

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x2

Screw(M4x45mm) . . . . . . . . . . . . . . . . . . . . . . . .x2

Screw(M4x20mm) . . . . . . . . . . . . . . . . . . . . . . . .x4

Symptom

Radio stations cannot

be tuned in.

The remote control

does not work

properly.

The front panel

display is too dim.

Cause

• The antenna is positioned or connected

poorly.

• The signal strength of the stations is too

weak (when tuning in with automatic

tuning).

• No stations have been preset or preset

stations have been cleared (when

tuning by scanning preset stations).

• The remote control is not pointed at the

remote sensor of the DVD/CD Receiver.

• The remote control is too far from the

DVD/CD Receiver.

• There is an obstacle in the path of the

remote control and the DVD/CD

Receiver.

• The batteries in the remote control are

flat.

• Nothing is displayed on the front panel

display.

Correction

• Connect the antenna securely.

• Adjust the antennas and connect an

external antenna if necessary.

•Tune in the station manually.

• Preset the stations (page 23).

• Point the remote control at the remote

sensor of the DVD/CD Receiver.

• Use the remote control within about 23

ft (7 m).

• Remove the obstacle.

• Replace the batteries with new ones.

• Press DIMMER on the remote control.

Reference

❋ Designs and specifications are subject to change without notice.

Specifications

GeneralCD/DVDVideo

Amplifier

Tuner

Power supply 220 - 240 V ~ 50/60 Hz

Power consumption 130 W

Net Weight 4 kg

External dimensions (W x H x D) 430 x 72 x 307 mm

Operating conditions Temperature: 5°C to 35°C, Operation status: Horizontal

Operating humidity 5% to 85%

Laser Semiconductor laser, wavelength 650 nm

Video system PAL/NTSC

Frequency response (audio) 140 Hz to 20 kHz 

Signal-to-noise ratio (audio) More than 75 dB (1 kHz, 20 kHz LPF/A-Filter) 

Dynamic range (audio) More than 75 dB 

Harmonic distortion (audio) 0.5 % (1 kHz, at 1W position) (20 kHz LPF) 

Video output 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1

/ SCART (TO TV)

COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1

(PB)/(PR) 0.7 V (p-p), 75 ohms, RCA jack x 2

HDMI OUT 480p (or 576p)/720p/1080i/1080p

Tuning Range 87.5 - 108.0 MHz (87.50 - 108.00 MHz)

Intermediate Frequency 10.7 MHz

Signal-to Noise Ratio 60 dB (Mono) 

Frequency Response 140 - 10,000 Hz 

Tuning Range 522 - 1,620 kHz

Intermediate Frequency 450 kHz

Stereo mode 155 W + 155 W (4Ω at 1 kHz, THD 10 %)

Surround mode Front: 155 W + 155 W (THD 10 %)

center*: 155 W

Surround*: 155 W + 155 W (4Ω at 1 kHz, THD 10 %)

Subwoofer*: 225 W (3Ω at 70 Hz, THD 10 %)

Inputs

AUDIO IN, OPTICAL IN, AUX IN, USB Port, TV-AUDIO(SCART)

Outputs MONITOR OUT, HDMI OUT, SCART

COMPONENT VIDEO OUT

Front Speaker Center speaker

Type

1-way 2-Speaker Bass-reflex type 1-way 2-Speaker Bass-reflex type

(Magnetically-shielded type) (Magnetically-shielded type)

Speaker 5.5cm Cone x 2 6.5cm Cone x 2

Impedance 4 Ω 4 Ω

Frequency Response 100 - 20000 Hz 90 -20000 Hz

Sound Pressure Level 79 dB/W•m 82 dB/W•m

Power Handling Capacity 155 W 155 W

Dimensions (W x H x D)

280 x 1106 x 280mm 250 x 85 x 91mm

Weight 3.3kg 0.77 kg

Rear Speaker Subwoofer

Type

1-way Bass-reflex type Bass-reflex type

Speaker 8cm Cone x 1 16cm Cone x 1

Impedance 4 Ω 3 Ω

Frequency Response 90 - 20000 Hz 30 -200 Hz

Sound Pressure Level 75 dB/W•m 72 dB/W•m

Power Handling Capacity 155 W 225 W

Dimensions (W x H x D)

106 x 120 x 102mm 214 x 296 x 332mm

Weight 0.43kg 4.7kg

Items with  are measured at Front Speaker Terminals in STEREO mode

Depending on the sound mode

settings and the source, there

may be no sound output.)

Speakers

0708SKMLGEEGL

TH-G60

2008 Victor Company of Japan, Limited

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JVC SP-THG60F in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC SP-THG60F

JVC SP-THG60F User Manual - German - 33 pages

JVC SP-THG60F User Manual - Dutch - 33 pages

JVC SP-THG60F User Manual - French - 33 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JVC SP-THG60F Manual

Product: