495432
32
Zoom out
Zoom in
Previous page
1/75
Next page
27
TA
NEWS/INFO
TA/INFO
NEWS
TA/NEWS/INFO
INFO
TA/NEWS
(None)
Switching to broadcast program of your
choice temporarily
Another convenient RDS service is called Enhanced Other
Networks.
This allows the receiver to switch temporarily to a broadcast program
of your choice (TA, NEWS, and/or INFO) from a different station
except in the following cases:
When you are listening to non-RDS Networksall AM (MW)
stations, some FM stations and other sources.
When the receiver is in standby mode or in TV Direct mode.
Before you start, remember...
The Enhanced Other Networks function is only applicable to preset
FM stations.
Press TA/NEWS/INFO repeatedly until the program
type you want appears on the display.
Each time you press the button, the display changes to show the
following:
TA: Traffic Announcement in your area.
NEWS: News.
INFO: Program the purpose of which is to impart advice in the
widest sense.
How the Enhanced Other Networks function actually works:
If the station currently tuned in starts broadcasting the
program type you have selected
The receiver continues to receive the station, but the indicator of
the received PTY code starts flashing.
When the program is over, the indicator of the received PTY code
stops flashing and remains lit, but the receiver remains in
Enhanced Other Networks standby mode.
If another FM station in the same Networks starts
broadcasting the program type you have selected while you
are listening to an FM station
The receiver automatically switches to the station. The indicator of
the received PTY code starts flashing.
When the program is over, the receiver goes back to the station
previously tuned in, but still remains in Enhanced Other Networks
standby mode. The indicator of the received PTY code stops
flashing and remains lit.
Tuner operations
To stop listening to the program selected by Enhanced Other
Networks
Press TA/NEWS/INFO repeatedly again so that the program type (TA/
NEWS/INFO) indicator goes off from the display. The receiver exits
from Enhanced Other Networks standby mode and goes back to the
previously selected station.
When an emergency broadcast (Alarm ! signal) is sent from an
FM station
The receiver automatically tunes in the station except in the following
cases:
When you are listening to non-RDS Networksall AM (MW)
stations, some FM stations and other sources.
When the receiver is in standby mode or TV Direct mode.
While receiving an emergency broadcast, Alarm ! appears on the
display.
The TEST signal is used for equipment testwhether it can
receive the Alarm ! signal correctly
The TEST signal makes the receiver work in the same way as the
Alarm ! signal does. If the TEST signal is received, the receiver
automatically switches to the station broadcasting the TEST signal.
While receiving the TEST signal, TEST appears on the display.
NOTES
Enhanced Other Networks data sent from some stations may not
be compatible with this receiver.
Enhanced Other Networks does not function for some FM stations
with RDS service.
While listening to a program tuned in by the Enhanced Other
Networks function, the station does not change even if another
network station starts broadcasting a program of the same
Enhanced Other Networks data.
While listening to a program tuned in by the Enhanced Other
Networks function, you can only use the TA/NEWS/INFO and
DISPLAY.
The Enhanced Other Networks mode only works when receiving an
FM station with the Enhanced Other Networks code.
CAUTION:
If the stations alternate intermittently between the station tuned by the
Enhanced Other Networks function and the currently tuned station,
press TA/NEWS/INFO repeatedly to cancel the Enhanced Other
Networks function. If you do not press the button, the currently tuned
station is received finally, and the indication of the Enhanced Other
Networks data type flashing on the display disappears.
23-27.RX-ES1&XV-N55[B]f 03.2.18, 1:46 PM27
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC RX-ES1SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC RX-ES1SL in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info