469766
42
Zoom out
Zoom in
Previous page
1/50
Next page
39
3
Press ADJUST.
The CONTROL buttons now work for sound
adjustments.
4
Press CONTROL (or 5) repeatedly until one
of the following indications (with the current
setting)
* appears.
REAR L : To adjust the left rear speaker output level
(from –10 to +10).
REAR R : To adjust the right rear speaker output level
(from –10 to +10).
EFFECT : To adjust the DSP effect level. As the number
increases, the effect becomes stronger (normally set
it to “EFFECT 3”).
* “0” is the initial setting for the speaker output levels, and
“EFFECT 3” is for the DSP effect level.
If you have already changed the setting, another setting will be
shown.
5
Press CONTROL 3 (or 2) to make an
adjustment.
When adjusting the speaker output levels, make adjustments
so that the sound level of the selected speaker is set at the
same level as that of the front speakers.
6
Repeat steps
4
and
5
to make other
adjustments.
To cancel DAP Mode
Press DSP MODE repeatedly so that “STEREO” appears on the
display. The DSP indicator goes off.
CENTER : To adjust the center speaker output level
(from –10 to +10).
REAR L : To adjust the left rear speaker output level
(from –10 to +10).
REAR R : To adjust the right rear speaker output level
(from –10 to +10).
EFFECT : To adjust the DSP effect level. As the number
increases, the effect becomes stronger (normally set
it to “EFFECT 3”).
* “0” is the initial setting for the speaker output levels, and
“EFFECT 3” is for the DSP effect level.
If you have already changed the setting, another setting will be
shown.
5
Press CONTROL 3 (or 2) to make an
adjustment.
When adjusting the speaker output levels, make adjustments
so that the sound level of the selected speaker is set at the
same level as that of the front speakers.
6
Repeat steps
4
and
5
to make other
adjustments.
To cancel Theatre Surround
Press DSP MODE repeatedly until “STEREO” appears on the
display. The PRO LOGIC and DSP indicators go off.
Using DAP Modes (Front Panel)
A DAP mode cannot be used with another DSP mode. Once one of
the DAP modes is activated, the other DSP mode in use will be
canceled.
You have to make this adjustment for each source.
You cannot use the DAP modes if no rear speakers are connected.
1
Select and play stereo analogue software or
Linear PCM digital software.
2
Press DSP MODE repeatedly until one of the
DAP modes appears on the display.
The DSP indicator lights up on the display.
Ex.: When adjusting the left rear speaker output level
Creating Realistic Sound Fields
ANALOG
PRO LOGIC
SUBWFR LFE
VOL
DGTL AUTO
INPUT ATT
DSP
LCR
LS S RS
LPCM
DOLBY D
DTS
Ex.: When adjusting the center speaker output level
CONTROL
ADJUST
ANALOG
PRO LOGIC
SUBWFR LFE
VOL
DGTL AUTO
INPUT ATT
DSP
LCR
LS S RS
LPCM
DOLBY D
DTS
CONTROL
ANALOG
SUBWFR
VOL
DSP
LR
LS S RS
(back to the begining)
DSP
MODE
ANALOG
PRO LOGIC
SUBWFR LFE
VOL
DGTL AUTO
INPUT ATT
DSP
LCR
LS S RS
LPCM
DOLBY D
DTS
CONTROL
EN30-39.RX-E100RSL[B]_4 01.3.7, 8:33 PM39
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC RX-E100RSL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC RX-E100RSL in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC RX-E100RSL

JVC RX-E100RSL User Manual - Dutch - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info