546765
58
Zoom out
Zoom in
Previous page
1/64
Next page
55
For CATV converter
Manufacturer Codes
GENERAL INSTRUMENT 06, 07, 08, 09, 10, 11,
12, 13, 14, 29
HAMLIN/REGAL 01, 02, 03, 04, 05
JERROLD 06, 07, 08, 09, 10, 11,
12, 13, 14
OAK 15, 16, 17
PANASONIC 18, 19, 20
PIONEER 21, 22
SCIENTIFIC ATLANTA 23, 24, 25
TOCOM 26
ZENITH 27, 28
Manufacturers codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
To change the transmittable signals for
operating a CATV converter or DBS tuner
1. Press and hold CATV/DBS .
2. Press CATV/DBS CONTROL.
CALL appears on the remote control display window.
3 Enter a manufacturers code using buttons 19,
and 0.
See the following lists to find the code.
4. Release CATV/DBS .
The following buttons can be used for operating the CATV
converter and DBS tuner:
CATV/DBS
:Turn on and off the CATV converter
or DBS tuner.
CH +/ :Change the channels.
1 10, 0, 100+ (+10) :Select the channels.
The 10-key will function as the
ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
Note:
Refer also to the manual supplied with your CATV converter or
DBS tuner.
5. Try to operate your CATV converter or DBS
tuner by pressing CATV/DBS
.
When your CATV converter or DBS tuner turns on or off, you
have entered the correct code.
If there are more than one code listed for your brand of
CATV converter or DBS tuner, try each one until the correct
one is entered.
Note:
You cannot preset the signals for both the CATV converter and DBS
tuner at the same time.
To change the transmittable signals for
operating another manufacturers VCR
1. Press and hold VCR1 .
2. Press VCR1.
CALL appears on the remote control display window.
3. Enter manufacturers code using buttons 19,
and 0.
See the list on the next page to find the code.
4. Release VCR1 .
The following buttons can be used for operating the VCR:
VCR1
:Turn on and off the VCR.
After pressing VCR1, you can perform the following operations
on the VCR:
CH +/ :Change the TV channels on the
VCR.
1 10, 0, 100+ (+10) :Select the TV channels.
The 10-key will function as the
ENTER button if your VCR requires
pressing ENTER after selecting a
channel number.
3 PLAY :Start playback.
REW :Rewind a tape.
FF :Fast wind a tape.
7 STOP :Stop playing or recording.
8 PAUSE: :Pause playing. To resume, press
3 PLAY.
REC PAUSE :Enter recording pause by pressing
this button.
To start recording again, press this
button then 3 PLAY.
Note:
Refer also to the manual supplied with your VCR.
5. Try to operate your VCR by pressing VCR1 .
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
Manufacturer Codes
JVC 56*, 57, 67
AMSTRAD 43, 44, 45, 46, 47, 48, 49
BLAUPUNKT 30
ECHOSTAR 50, 51, 67
GOLDSTAR 31
GRUNDIG 32, 33
HIRSHMANN 48, 52, 53, 54, 55
INSTRUMENT 68
ITT/NOKIA 34
KATHREIN 52, 58, 59, 60, 61, 62, 63
NEC 35, 36
ORBITECH 48
PHILIPS 37, 38
RCA 65
SAMSUNG 39, 40
SCHWAIGER 61, 64
SIEMENS 41, 42
SONY 66
TECHNISAT 48
For DBS tuner
*Initial setting
EN49-60.RX-8020V[UJ]_f 02.5.22, 10:04 AM55
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC RX-8020VBK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC RX-8020VBK in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info