546765
52
Zoom out
Zoom in
Previous page
1/64
Next page
49
AV COMPU LINK Remote Control System
The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, VCR, and DVD player)
through the receiver.
This receiver is equipped with the AV COMPU LINK-III, which adds a function to operate JVC’s video components through the video
components terminals. To use this remote control system, you need to connect the video components you want to operate, following the
diagrams below and the procedure on the next page.
CONNECTIONS 1: AV COMPU LINK Connection
CONNECTIONS 2: Video Cable Connection
This receiver is equipped with three types of the video terminals—S-video, composite video, and component video, and the signals coming
into this receiver through one type of video jacks can output only through the jack of the same type. So you need to connect the VCR and/or
DVD player to the TV using one of the following three ways:
When using the AV COMPU LINK remote control system, set the component video input for the DVD player and the DBS tuner
correctly (see “7 Setting the Component Video Input” on page 25); otherwise, the correct input for this receiver will not be selected on
the TV.
Notes:
When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use automatic
selection of TV’s input mode (see page 50).
When connecting only the VCR 1 or DVD player to this receiver, connect it directly to the receiver using cables with the monaural mini-plugs.
To Video Input 1
TV
RX-8020VBK
S-video cable
S-video cable
Source
Equipment
To Video Input 2
(Composite)
TV
RX-8020VBK
Composite
video cable
Source
Equipment
Composite
video cable
When connecting the source equipment to the receiver through the S-video jacks, connect this receiver
to the TVs Video Input 1 jack using S-video cables.
When connecting the source equipment to the receiver through the composite video jacks, connect this
receiver to the TVs Video Input 2 jack (composite video input) using composite video cables.
When connecting the source equipment to the receiver through the component video jacks, connect this
receiver to the TVs Video Input 2 jack (component video input) using component video cables.
To Video Input 2
(Component)
TV
RX-8020VBK
Component
video cable
Source
Equipment
Component
video cable
CASE 2
IMPORTANT:
The AV COMPU LINK remote control system cannot control the
DBS tuner connected to the TV SOUND/DBS and DBS component
video jacks, and video components connected to the VIDEO and
VCR 2 jacks on the receiver.
CAUTION:
You can only connect to the TV
with the AV COMPU LINK EX or
AV COMPU LINK-III jack. DO
NOT connect to the TV with AV
COMPU LINK RECEIVER/AMP
jack.
AV
COMPU LINK
VHS
AV
COMPU LINK
AV
COMPU LINK EX
DVD
AV
COMPU LINK-
ΙΙΙ
AV
COMPU LINK-
ΙΙΙ
DVD player
TV
VCR 1
(VCR connected to
VCR 1 jacks)
CASE 1
CASE 3
EN49-60.RX-8020V[UJ]_f 02.5.22, 10:04 AM49
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC RX-8020VBK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC RX-8020VBK in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info