546765
48
Zoom out
Zoom in
Previous page
1/64
Next page
45
1 Source name: CD or MD
2 Select
or , then press SET to change the disc.
3 Track numbers and track titles.
When you move to a track number, you can
change the track information by pressing 2 or 3.
Each time you press the button, track information
alternates between its track title and its performer.
(You can also start playing the track by pressing SET.)
4 Select this (move
in front), then press SET to go to
the DISC SEARCH screen (see page 46).
5 Select this (move in front), then press SET to go to
the TITLE INPUT screen (see page 47).
6 This appears only when a CD Text is selected.
7 Disc information such as the disc title, performer, and
music genre.
When this is selected (
in front), you can change the
disc information by pressing 2 or 3. Each time you
press the button, disc information (see Note on 7 )
changes.
8 Select
or , then press SET to change the track.
9 Usable buttons and their functions for the current
selection.
Indication here will be changed according to what is
currently selected (
in front) on the screen. See Note
on 9.
Note on
7
:
The following information will appear on the display:
For CD Texts—Disc title, Performer, Genre, Song writer, Composer,
Arranger, Message
Only recorded information will be shown. If there is no data,
“NO DATA” will appear.
For MDs—Disc title
If there is no data, “NO DATA” will appear.
Note on
9
:
For example, SET button will be used to start play (PLAY), to go to the
next screen (ENTER), and to determine the selection (ENTER).
To exit from the Disc information screen
Press EXIT.
Notes:
The on-screen display will disappear in the following cases:
if no operation is done for about 10 minutes.
if you do any operation other than explained in this section.
To control an MD recorder using the TEXT COMPU LINK remote
control system, you have to change the source name shown on the
display from “TAPE” to “MD. (See page 17.)
Some special characters and marks cannot be displayed correctly.
MENU
+
+
+
231
564
89
7/P
0
+10
10
BOOST
FRONTL
MENU
ENTER
FRONTR
BASS
DIMMER
TEST
CENTER
SUBWFR
DIGITAL EQ
SBACKL
SBACKR
SURRL
SURRR
MUTING
CH/
LEVEL
TV VOL
PLAY
STOP
/REW
DOWN TUNING UP
FF/
EXIT
VOLUME
CATV/DBS
CONTROL
TV/VIDEO
REC
PAUSE
SLEEP
PAUSE
SET
RETURN FM MODE 10 0
+
CONTROL
RM-SRX8020J
REMOTE CONTROL
CATV /DB S VCR1 TV AUDIO
DSP
OFF
DVD MULTI
DVD
USB
CD
CDR
TAPE/MD
TV/DBS VIDEO PHONO
FM/AM
VCR1 VCR2
SURROUND
SURR/DSP
ANALOG/DIGITAL
A/V CONTROL RECEIVER
INPUT
DIRECT
ANALOG
TEXT
DISPLAY
SOUND
PLAY
STOP
/REW
DOWN TUNING UP
FF/
EXIT
TEXT
DISPLAY
PAUSE
SET
MENU
Operations:
To use this remote control system, you need to connect the TV to the
MONITOR OUT jack on the rear panel (see page 11), and set the
TVs input mode to the proper position to which the receiver is
connected. Make sure you have connected a CD player or
MD recorder equipped with the TEXT COMPU LINK
remote control system. If not, you cannot use the
following functions.
Showing the Disc Information on the TV
Screen
Press TEXT DISPLAY while “CD” or “MD” is
selected as the source.
The Disc Information screen appears on the TV.
On-Screen Operating buttons (on the remote control)
When you press TEXT DISPLAY,
MENU appears on the remote
control display window.
EN43-48.RX-8020V[UJ]_f 02.5.27, 9:27 AM45
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC RX-8020VBK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC RX-8020VBK in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info