546765
45
Zoom out
Zoom in
Previous page
1/64
Next page
42
EFFECT LEVEL :
(EFFECT)
ROOM SIZE :
(ROOMSIZE)
LIVENESS :
Adjust the DAP effect level. As the
number increases, the DAP effect
becomes stronger. (Normally select 3.
Adjustable range: 1 to 5)
Adjust the virtual room size. As the
number increases, the interval between
reflections increases so that you will feel
as if you were in a larger room. (Normally
select 3. Adjustable range: 1 to 5)
Adjust the liveness effect. As the number
increases, the attenuation level of
reflections over time decreases so that
acoustics change from Dead to Live.
(Normally select 3. Adjustable range: 1 to 5)
Using the on-screen display (through the remote control]:
1. Show EFFECT ADJUST menu (see page 38).
Parameters that are not adjustable for the currently
selected Surround and DSP modes are skipped.
2. Press 5 or to move to a parameter you
want to adjust.
3. Press 2 or 3 to adjust the parameter.
4. Repeat steps 2 and 3 to adjust the other
parameters.
5. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
On the front panel:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1. Press EFFECT repeatedly to select a
parameter you want to adjust.
Each time you press the button, the items change
as follows:
EFFECT
=
ROOMSIZE
=
LIVENESS
=
CTR (center) TONE
=
PNRAMA (Panorama)
=
C (center) WIDTH
=
DIMENSION
=
(Back to the beginning)
Parameters that are not adjustable for the currently selected
Surround and DSP modes are skipped.
2. Press CONTROL UP 5 or
DOWN to adjust the sound
parameter.
3. Repeat steps 1 and 2 to adjust the other
parameters.
Adjusting the Sound Parameters for the
Surround and DSP ModesEFFECT ADJUST
You can adjust the Surround and DSP sound parameters to your
preference.
Once you have made adjustment, it is memorized for each source.
7
Adjustable parameters
You can adjust the following parameters:
For Surround, DAP, JVC Theater Surround and All Channel
Stereo modes (when the center speaker is connected)
For DAP modes and JVC Theater Surround
Note:
You can only adjust the Effect Level when using a DAP mode with
the 3D-PHONIC indicator lights up.
For Pro Logic II Music only
Note:
Parameters that are not adjustable for the currently selected Surround
and DSP modes are skipped.
Adjust the center tone. As the number
increases, the dialogue becomes clearer so
that the human voices change from soft to
sharp. (Normally select 3. Adjustable range:
1 to 5)
CENTER TONE :
(CTR TONE)
PANORAMA :
(PNRAMA)
control
CENTER WIDTH :
(CWIDTH)
DIMENSION :
Select ON to add wraparound sound
effect with side-wall image. (Initial
setting: OFF)
Adjust the center channel localization
between the center speaker and the left/
right speakers. As the number increases, the
center channel sound moves toward the left
and right speakers. (Normally select 3.
Adjustable range: OFF and 1 to 7)
Adjust sound localization position. As the
number increases, the sound localization
moves towards forward from backward.
(Normally select 4. Adjustable range: 1 to 7)
EFFECT SET
T
CONTROL
DOWN UP
EN38-42.RX-8020V[UJ]_f 02.5.22, 9:54 AM42
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC RX-8020VBK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC RX-8020VBK in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info