546765
16
Zoom out
Zoom in
Previous page
1/64
Next page
13
DVD
DBS
DIGITAL IN
DIGITAL 3 (TV)
DIGITAL 4 (CDR)
DIGITAL 2 (CD)
DIGITAL 1 (DVD)
PCM/DOLBY DIGITAL
/DTS
DIGITAL OUT
Digital Connections
This receiver is equipped with four DIGITAL IN terminalsone
digital coaxial terminal and three digital optical terminalsand one
DIGITAL OUT terminal.
IMPORTANT:
When connecting a DVD player, digital TV broadcast tuner or DBS
tuner using the digital terminals, you also need to connect it to the
video jacks on the rear. Without connecting it to the video jacks, you
can view no playback picture.
After connecting the components using the DIGITAL IN terminals,
set the following correctly if necessary.
Set the digital input (DIGITAL IN) terminal setting correctly. For
details, see 6 Setting the Digital Input (DIGITAL IN) Terminals
on page 25.
Select the digital input mode correctly. For details, see Selecting
the Analog or Digital Input Mode on page 19.
Notes:
When shipped from the factory, the DIGITAL IN terminals have
been set for use with the following components:
DIGITAL 1 (coaxial): For DVD player
DIGITAL 2 (optical): For CD player
DIGITAL 3 (optical): For digital TV broadcast tuner
DIGITAL 4 (optical): For CD recorder
When you want to operate the CD player, CD recorder, or MD
recorder using the COMPU LINK remote control system, connect
the target component also as described in Analog Connections
(see page 9).
When you want to operate a DVD player using the AV COMPU
LINK remote control system (see page 49), connect the DVD player
also as described in Analog Connections (see page 12).
Note:
The digital signal format output through the DIGITAL OUT terminal is
the same as that of the input signal. This means that when the DTS
Digital Surround signals are input, the DTS Digital Surround signals
are output.
Digital optical cable (not supplied)
between digital optical terminals
Digital input terminals
You can connect any digital equipment as follows:
Digital TV
CD recorder
DVD player
Digital coaxial cable (not supplied)
between digital coaxial terminals
Digital optical cable (not supplied)
between digital optical terminals
Digital VCR
CD recorder
MD recorder
When the digital recording
equipment such as an MD recorder
and CD recorder has a digital
optical input terminal, connecting it
to the DIGITAL OUT terminal
enables you to perform digital-to-
digital recording.
CD player
DBS tuner
MD recorder
When the component has a digital
optical output terminal, connect it to the
DIGITAL 2 (CD), DIGITAL 3 (TV) or
DIGITAL 4 (CDR) terminal, using a
digital optical cable (not supplied).
When the component has a digital
coaxial output terminal, connect it to the
DIGITAL 1 (DVD) terminal, using a
digital coaxial cable (not supplied).
Before connecting a digital
optical cable, unplug the
protective plug.
Digital output terminal
EN01-15.RX-8020V[UJ]_f 02.5.22, 9:41 AM13
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC RX-8020VBK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC RX-8020VBK in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info