603989
37
Zoom out
Zoom in
Previous page
1/46
Next page
Page 32
English
6. Press Control
%%
%%
% /
until “–DELAY +” appears on the display.
7. Press Control
@@
@@
@ /
##
##
# to adjust the delay time of the rear speaker output.
Each time you press the button, the delay time changes as follows:
DELAY 1: Select this when the distance from you to your rear speakers is greater than that
to the front speakers.
DELAY 2: Select this when the distance from you to your rear speakers is almost equal to
that to the front speakers.
DELAY 3: Select this when the distance from you to your rear speakers is a little less than
that to the front speakers.
DELAY 4: Select this when the distance from you to your rear speakers is much less than
that to the front speakers.
Note:
When you have selected “3CHLOGIC,” you cannot adjust the delay time.
8. Press Control
%%
%%
% /
until “TEST” appears on the display, then press Control
@@
@@
@ /
##
##
# to start
checking the speaker output balance.
“TEST” starts flashing on the display, and a test tone comes out of the speakers in the following
order:
Notes:
No test tone comes out of the rear speakers when you have selected “3CHLOGIC.”
No test tone comes out of the center speaker when you select “PHANTOM” or “OFF” for the center
mode.
9. If necessary, adjust the speaker output level as follows:
To adjust the rear speaker output level, press Control % / until “– REAR +” appears on the
display, then press Control @ / #.
To adjust the center speaker output level, press Control % / until “–CENTER+” appears on the
display, then press Control @ / #.
Notes:
You cannot adjust the left and right rear speaker output level separately.
You cannot adjust the rear speaker output level when you have selected “3CHLOGIC.”
You cannot adjust the center speaker output level when you select “PHANTOM” or “OFF” for the
center mode.
10. Press Control
%%
%%
% /
until “TEST” appears on the display, then press Control
@@
@@
@ /
##
##
# to stop the
test tone.
11. Press Control
%%
%%
% /
until “CNT TONE” (Center Tone) appears on the display.
12. Press Control
@@
@@
@ /
##
##
# to select the center tone you want.
The center tone adjustment affects the mid-frequency range, which the human voice is mostly made
up of.
Each time you press the button, the display changes to show the following:
To make the dialogue clearer, select “SHARP1” (little) or “SHARP2” (much).
To make the dialogue softer, select “SOFT1” (little) or “SOFT2” (much).
When “FLAT” is selected, no adjustment is applied.
Note:
The center tone cannot be adjusted when sounds do not come out of the center speaker.
DELAY 1
DELAY 2
DELAY 4
DELAY 3
Left front speaker
Center speaker
Rear speakers
Right front speaker
Front panel
SHARP1 SHARP2FLATSOFT2 SOFT1
RX-630RBK[EF]0055-001A.En.28-34 97.7.25, 5:51 PM32
Downloaded from www.Manualslib.com manuals search engine
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC RX-630 RBK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC RX-630 RBK in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info