Basic and Common Operations
Press Functions
•
turned off.
•
(SNOOZE).
(see “Stopping alarm sound”)
See “How to set the
time and use the alarm”
Turn on or off the power
Press Functions
Turns on or off the power
When the power is turned off at volume level “15”
or higher, the unit automatically sets the volume
level to “14” the next time it is turned on.
Adjust the volume
Press Functions
Adjust the volume level from 00 to a
maximum of 20.
–: Turn down the volume.
+: Turn up the volume.
Display
Date
Day of the week
Temperature
Current time/
alarm time
Explanation of Icons
Off: current time / On: alarm time
Off: alarm off / On: alarm on / Blinking: alarm sounding (When “TIMER PLAY” is set)
Blinks while snoozing (the alarm is paused)
Sound source indicator iPod/FM/AUX (blinks while muted)
When adjusting the volume 00 - 20
When FM radio is selected P01 - P20 (channel) /
87.50 - 108.00 MHz (frequency)
When the source is set to iPod and the
alarm is set to TIMER PLAY
iPod (slow blinking)
When the source is set to FM radio and
the alarm is set to TIMER PLAY
87.50 - 108.00 MHz ↔ P01-P20
When battery power is low - - -
When trying to set alarm to TIMER PLAY
while selecting AUX
How to set the time and use the alarm
Switch/Press Functions
Switch the alarm on/off.
OFF: turn off the alarm (BUZZER/ TIMER PLAY).
BUZZER: alarm on (buzzer sound)
TIMER PLAY: alarm on (iPod/FM radio)
•
•
Change the values for the time setting.
Setting the Clock
1 Switch to current time display with the “SET” button.
2 Press and hold the “SET” button. → The year display starts fl ashing.
3 While fl ashing, set each item with the “DOWN”/“UP” buttons.
4 Press the SET button.
• fl ashing items will change in the following order.
•
NOTES
•
•
Setting the alarm (ALARM-BUZZER)
1 Switch to alarm time display with the “SET” button. → “ALARM” icon appears on the display.
2 Press and hold the “SET” button. → The hour display starts fl ashing.
3 While fl ashing, set each item with the “DOWN”/“UP” buttons.
• fl ashing items will change in the following order.
•
4 Switch the “ALARM” switch to “BUZZER”.
•
•
Selecting iPod or FM radio for the alarm sound (ALARM-TIMER PLAY)
1 Set the alarm time.
(See steps 1 to 3 of “To set the alarm (ALARM-BUZZER)”)
•
PLAY time.
2 If the power is off, turn the unit power on.
3 Confi rm that you can hear the iPod or FM radio.
•
4 Switch the “ALARM” switch to “TIMER PLAY”. The selected source is blinking on the display.
Stopping alarm sound
To pause the alarm (snooze)
Press the “SNOOZE/LIGHT” button while the alarm in sounding, when the alarm is set with either
“ALARM-BUZZER” or “ALARM-TIMER PLAY”.
The alarm sound is temporarily stopped, and started again 5 minutes later. You can repeat this up to 10
times.
To stop the alarm (BUZZER/ TIMER PLAY)
•
Playing back from other equipment
Connecting other equipment
Connect an external device to the AUX jack on the rear of the unit using a stereo mini plug cord (not
supplied) .
NOTE
•
Listening to external devices
1 Turn the unit power on.
2 Select “AUX” with the “SOURCE” button.
3 Start playback on the external device.
4 Adjust the volume.
To audio output such as CD/
MD/digital audio player, etc.
Playing back from iPod
Setting the iPod on the unit
1 Select the attachment compatible to your iPod (see “iPod Compatibility Chart”).
2 Match the attachment tab to the hole in the unit, and insert the attachment to the unit.
3 Connect the iPod to the connector plug of the unit.
•
•
•
Listening to the iPod
1 Connect the iPod to the unit.
2 Turn the unit power on.
3 Select “iPod” with the “SOURCE” button.
When iPod is selected as sound source, it automatically starts playback.
Press
Functions
Unit Remote control
6
Playback/Pause
Press and hold this button to switch the iPod to sleep mode.
¢
Next song / fast forward (press and hold)
4
Previous song (Press this button during playback to jump back
to the beginning of the track.) / fast rewind (press and hold)
Charging the iPod
The iPod is charged while it is set on the unit when the Unit power is on.
•
the Unit is operated on the battery power supply.
•
•
•
the rear of the Unit.
Set the “CHARGING SWITCH” to “FIREWIRE” for 10GB/15GB/20GB/
30GB/40GB iPod 3rd Generation. For all other models, you can set the
switch to either “FIREWIRE” or “USB” to charge the iPod.
iPod Compatibility Chart
iPod model
4 GB mini 1st Generation
4 GB mini 2nd Generation
6 GB mini 2nd Generation
iPod nano
1GB/2GB/4GB
iPod nano
2nd Generation
2GB/4GB/8GB
iPod video
5th Generation
30GB
iPod video
5th Generation
60GB/80GB
Attachment names mini nano 2G nano VIDEO 30GB VIDEO 60GB
iPod model
iPod 3rd Generation 10GB/15GB/20GB
iPod 4th Generation 20GB
iPod photo 4th Generation 20GB/30GB
iPod 3rd Generation 30GB/40GB
iPod 4th Generation 40GB
iPod photo 4th Generation 40GB/60GB
Rubber pad A type (Large) B type(Small)
Attachment name iPod
Combine this attachment with the rubber pads.
Select the rubber pad size which matches your iPod model.
•
Listening to FM Broadcasts
Press
Functions
Unit Remote control
FM MODE/
Switch FM stereo/monaural.
When there is too much static in an FM stereo broadcast, you
can reduce the static by switching to monaural reception.
Press again to switch back to stereo reception.
If the broadcast is not FM stereo, the sound becomes
monaural, even if FM stereo is selected.
6
—
•
Switch channel display / frequency display. Channel display is
automatically switched to frequency display after approx. 3 seconds.
•
“Presetting Stations”)
¢
4
Select a channel from P01 to P20.
(The unit button can be used when channel display is selected.)
¢
4
Change frequencies to tune in to FM radio station. (The unit
button can be used when frequency display is selected.)
•
The search is fi nished when the signal is received. Press
again while searching to quit search.
Listening to FM radio
Stretch out the wire antenna located on the rear of the unit before using.
1 Turn the Unit power on.
2 Select “FM” with the “SOURCE” button.
3 Select a station with the “4 ”/“¢ ” button.
Presetting Stations
1 Select “FM” with the “SOURCE” button, and switch to channel display with “6 ” button.
2 Use 4”/“ ¢” button to select the channel number (P01 to P20) to be registered.
3 Press and hold the “6 ” button. → The channel number starts fl ashing.
4 Use 4”/“ ¢” button to select the frequency (87.50 MHz to 108.00 MHz) of the station that you
wish to register.
5 Press 6” button → The selected frequency will be registered.
• To fi rm registration, select the registered channel number (P01 to P20), and press “6 ” button to
display frequency.
Channel display
Year → Month → Day → 12/24-hour time → Hour → Min. → time display
NOTES
• fi rst purchased. Please remove the
cover before operating the unit.
•
damages to the connector part.
•
damages to the connector part.
•
For details about updating your iPod, check on the Apple web site <http://www.apple.com>.
•
•
this product.
•
When distortion occurs, it is recommended to turn off the equalizer of the iPod. For
information on operating the iPod, see the iPod instruction manual.
How to combine the rubber pads with the attachment
There are two types of rubber pad : “A type (Large)” and “B type (Small)”.
Select the appropriate rubber pads for your iPod model.
Insert the rubber pads narrow-end fi rst.
A type (Large)
B type(Small)
Attachment name
CHARGING SWITCH
Press Functions
FM MODE/
•
button is held down.
•
selected.
¢
4
6
(see “Playing back from iPod” and
“Listening to FM Broadcasts”)
Select a source
Press Functions
Select a source
iPod → FM → AUX
“STEREO” is displayed when an FM stereo broadcast is received.
“MONO”
is displayed when the monaural is selected.
(see “Listening to FM Broadcasts ”)
Current time: Blinking / Other Clock Display: Lighting
Hour → Min. → TIMER PLAY time (10 to 30) → time display
Hour → Min. → TIMER PLAY time (10 to 30) → time display
Press Functions
Switch the temperature
display between Celsius/
Fahrenheit.
Remote control
sensor
iPod connector plug
CAUTION:
•
•
RA-P10-B_EN.indd 2RA-P10-B_EN.indd 2 10/3/2006 11:54:17 AM10/3/2006 11:54:17 AM
