660673
43
Zoom out
Zoom in
Previous page
1/51
Next page
43
Maintenance
Troubleshooting
Problem Cause Remedy
The projector does
not turn on.
There is no power from the power
cable.
Plug the power cable into the AC inlet on
the rear of the projector, and plug the
power cable into to the power outlet. If the
power outlet has a switch, make sure that
it is switched on.
Attempting to turn the projector on
again during the cooling process.
Wait until the cooling down process has
completed.
The lamp cover is not securely
attached.
Correctly attach the lamp cover.
No picture.
The video source is not turned on
or connected correctly.
Turn the video source on and check that
the signal cable is connected correctly.
The projector is not correctly
connected to the input source
device.
Check the connection.
The input source has not been
correctly selected.
Select the correct source with the
SOURCE key on the projector or remote
control.
Image is unstable.
The connection cables are not
securely connected to the
projector or the signal source.
Correctly connect the cables to the
appropriate terminals.
Picture is blurred.
The projection lens is not correctly
focused.
Adjust the focus of the lens using the
focus ring.
The projector and the screen are
not aligned properly.
Adjust the projection angle and direction
as well as the height of this projector if
necessary.
The lens cover is still closed. (If
available)
Remove the lens cover. (If available)
Remote control
does not work
correctly.
The battery is out of power. Replace both of the battery with new one.
There is an obstacle between the
remote control and the projector.
Remove the obstacle.
You are too far away from the
projector.
Stand within 8 meters (26.2 feet) of the
projector.
3D content does not
display correctly
The 3D glasses are out of battery. Recharge the 3D glasses.
The settings in the 3D menu are
not set correctly.
Correctly set the settings in the 3D menu.
Your Blu-ray Disc is not in 3D
format.
Use a 3D
Blu-ray Disc and try again.
The input source has not been
correctly selected.
Select the correct source with the
SOURCE key on the projector or remote
control.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC LX-WX50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC LX-WX50 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC LX-WX50

JVC LX-WX50 Quick start guide - English - 2 pages

JVC LX-WX50 User Manual - German - 57 pages

JVC LX-WX50 User Manual - Dutch - 54 pages

JVC LX-WX50 User Manual - French - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info