660673
31
Zoom out
Zoom in
Previous page
1/51
Next page
31
Controlling the projector remotely
Controlling the projector remotely
With a proper LAN cable connection and LAN Control settings, you can operate the projector
from a computer using a web browser or PJLink™ application when the computer and the
projector are connected to the same local area network. This projector supports Crestron®
software and PJLink™.
Configuring the LAN Settings
To access the OSD menu, see "Using the OSD menu" for details.
If you are in a DHCP environment:
1. Make sure the projector and your computer are properly connected to the same local area
network.
2. Go to
SYSTEM SETUP: Advanced > LAN Settings, and press ENTER.
3. The LAN Settings page is displayed.
4. Press
to select DHCP and press / to select On.
5. Press
to select Apply and press ENTER.
6. Please wait for around 15 - 20 seconds, and then re-enter the LAN Settings page.
7. The Projector IP Address, Subnet Mask, Default Gateway, and DNS Server settings will
be displayed. Note down the IP address displayed in the Projector IP Address row.
If the Projector IP Address still does not appear, contact your network administrator.
If the LAN cables are not properly connected, the Projector IP Address, Subnet Mask, Default
Gateway, and DNS Server settings will display 0.0.0.0. Make sure the LAN cables are properly
connected and perform the above procedures again.
If you are in a non-DHCP environment:
1. Make sure the projector and your computer are properly connected to the same local area
network.
2. Go to
SYSTEM SETUP: Advanced > LAN Settings, and press ENTER.
3. The LAN Settings page is displayed.
4. Press
to select DHCP and press / to select Off.
5. Contact your network administrator for information on the Projector IP Address, Subnet
Mask, Default Gateway, and DNS Server settings.
6. Press to select the item you want to modify and press ENTER.
7. Press / to move the cursor and then press
/ to enter the value.
8. To save the setting, press ENTER. If you do not want to save the setting, press MENU.
9. Press to highlight Apply and press ENTER.
If the LAN cables are not properly connected, the Projector IP Address, Subnet Mask, Default
Gateway, and DNS Server settings will display 0.0.0.0. Make sure the LAN cables are properly
connected and perform the above procedures again.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC LX-WX50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC LX-WX50 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC LX-WX50

JVC LX-WX50 Quick start guide - English - 2 pages

JVC LX-WX50 User Manual - German - 57 pages

JVC LX-WX50 User Manual - Dutch - 54 pages

JVC LX-WX50 User Manual - French - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info