676009
34
Zoom out
Zoom in
Previous page
1/44
Next page
34
Maintenance
7. Disconnect the lamp connector from the projector.
8. Use the handle to slowly pull the lamp out of the projector.
Pulling it too quickly may cause the lamp to break and scatter
broken glass in the projector.
Do not place the lamp in locations where water might splash on it,
children can reach it, or near flammable materials.
Do not insert your hands into the projector after the lamp is
removed. If you touch the optical components inside, it could
cause color unevenness and distortion of the projected images.
9. As shown in the illustration, lower the new lamp
(replacement lamp: PK-L2417U).
Insert the bulge at the bottom of the lamp securely into the
hole inside the projector. If it is not properly inserted, it may
cause decrease of brightness or damage the equipment.
10.Insert the lamp connector.
11. Tighten the screw that secures the lamp.
12.Ensure the handle is fully laid flat and locked in place.
Loose screws may cause a bad connection, which could result in
malfunction.
Do not over tighten the screw.
13.Replace the lamp protection film.
14.Replace the lamp cover on the projector.
15.Tighten the screws that secure the lamp cover.
16.Replace the screw cap.
Loose screws may cause a bad connection, which could result in
malfunction.
Do not over tighten the screw.
17.Connect the power and restart the projector.
18.After the startup logo displays, reset the lamp timer via the OSD menu.
Do not reset if the lamp is not new or replaced as this could cause damage.
A "Reset Successfully" message displays to notify that the lamp time has been reset to "0".
7
8
7
12
11
10
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC LX-UH1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC LX-UH1 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC LX-UH1

JVC LX-UH1 User Manual - German - 46 pages

JVC LX-UH1 User Manual - Dutch - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info