804118
27
Zoom out
Zoom in
Previous page
1/43
Next page
27
Menu Functions
SYSTEM SETUP: Basic menu
12V Trigger
There is one 12V trigger that works according to your needs for installation
scenarios. Two selections are available:
Off: If this is selected, the projector will not send electronic signal out
when it is turned on.
On: The projector will send a low to high electronic signal out when it is
turned on, a high to low signal out when it is turned off.
High Altitude
Mode
The mode is for operation in areas like high altitude or high temperature
environments. Activate the function when your environment is between 1500
m–3000 m above sea level and ambient temperature is between 0°C–30°C.
Operation under High Altitude Mode may cause a higher decibel operating
noise level because of increased fan speed necessary to improve overall
system cooling and performance.
If you use this projector under other extreme conditions excluding the above, it
may display auto shut-down symptoms, which is designed to protect your
projector from over-heating. In cases like this, you should switch to High
Altitude Mode to solve these symptoms. However, this is not to state that this
projector can operate under any and all harsh or extreme conditions.
Submenu Functions and Descriptions
Language Sets the language for the On-Screen Display (OSD) menus.
Background
Color Sets the background color for the projector.
Splash Screen Allows you to select which logo screen displays during projector start-up. You
can choose JVC logo screen, Blue screen, or Black screen.
Auto Power Off Prevents unnecessary projection when no signal is detected for a long time.
See "Setting Auto Power Off" for details.
Direct Power On Allows the projector to turn on automatically once the power is fed through the
power cord.
Menu Settings
Menu Position
Sets the OSD menu position.
Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
• Reminder Message
Sets the reminder messages on or off.
Rename Input Renames the current input source to your desired name. use / / / and
OK to set the desired characters for the connected source item.
Auto Input
Search
Sets whether the projector searches automatically for input sources.
Select On to enable the projector to scan for input sources until it acquires a
signal. If the function is set to Off, the projector will select the last used input
source.
Submenu Functions and Descriptions
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC LX-NZ3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC LX-NZ3 in the language / languages: English as an attachment in your email.

The manual is 4.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC LX-NZ3

JVC LX-NZ3 User Manual - German - 46 pages

JVC LX-NZ3 User Manual - Dutch - 44 pages

JVC LX-NZ3 User Manual - French - 45 pages

JVC LX-NZ3 User Manual - Spanish - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info