56826
20
Zoom out
Zoom in
Previous page
1/21
Next page
33
ENGLISH
34
IMPORTANT! PREPARE USE
SETTINGS
TROUBLE?
“T-V LINK” allows the TV to share information easily with a connected “T-V LINK” compatible device.
By using T-V LINK :
You can send the channel information programmed on the TV to the “T-V LINK” compatible device, so that
both the TV and the external device have the same channel settings. When connecting a new external device,
channel information is loaded into it, allowing channel setup to be completed very quickly. For more details, refer
to the external device’s manual.
You can easily record the TV programme you are viewing on a “T-V LINK” compatible device by using the
“DIRECT REC” feature. For more details, refer to the external device’s manual.
*Macintosh* computers are not supported.
(Macintosh is a registered trademark of
Apple Computer, Inc.)
If the signal doesn’t appear, check that the vertical
frequency on the PC is set to “60Hz”.
Technical information
Some cable companies transmit a signal called “ACI” which contains information that allows TV channels to be
registered automatically on your TV.
When an ACI signal is received, “ACI Start / ACI Skip” appears in the “Auto Program” screen.
Depending on the country selected during “Auto Program”, the receivable broadcast system differs.
UNITED KINGDOM: Receive only PAL-I.
FRANCE: Can receive SECAM-L.
To receive SECAM-L in countries other than France:
1) Change the “Country” to “France” in “Auto Program”.
2) Press the “BACK” button to return to the menu and enter the channel using “Insert” or “Manual”.
Connect a “DVI“ device to “EXT-5 (HDMI)” using “DVI-HDMI” conversion cable. Connect analogue sound output of
the DVI device to L and R terminals in EXT-4.
Set “Audio” in “HDMI Setting” to “Analogue” or “Auto” (P. 28)
EXT-6 input does not support analogue sound (EXT-4).
EXT-6 input does not support DVI devices.
Troubleshooting
(continued)
Resolution
640 x 480 (VGA)
1024 x 768 (XGA)
Vertical frequency (Hz) 60.0 60.0
What is “T-V LINK”?
What is “ACI” (Automatic Channel Installation)?
Receivable broadcast systems
PC Signals that can be displayed
Connect “DVI” devices
Problem Actions
page
Display ScreenFunctionsHDMI
Switch “Size” in “HDMI Setting” to “1” or “2”.
Wrong screen size 28
Use the cable marked with HDMI logo.
No picture, no sound
Check if the device is compliant with HDMI.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for
HDMI devices, or “Analogue” or “Auto” for DVI devices.
(Not available for “EXT-6”.)
No sound
28
Wait a little for the signal to stabilize when switching the
signal format for an “HDMI” device.
Green and distorted
screen
It is not a malfunction. Some functions (dark background) in
the menu do not work depending on the situation.
Some functions do not
work
“EXT-4”, “EXT-5”, “EXT-6” inputs and PC mode cannot be
selected in the sub-picture.
RGB input signal of “EXT-1” and “EXT-2” are not available in
dual-picture mode.
Some inputs cannot
be selected in the
sub-picture
Is the “T-V LINK” compatible device connected to “EXT-2”?
Is the SCART CABLE “Fully Wired”?
Is the “T-V LINK” compatible device turned on?
After confirming all the conditions above, press “OK” button
again.
“Feature Not Available”
appears
34
34
Press 2 to start “ACI” again.
If you still receive the “ACI Error” after numerous tries, press
3 to cancel “ACI”.
“ACI Error” appears
LCD panels use fine dots (“pixels”) to display images.
While more than 99.99% of these pixels function properly,
a very small number of pixels may not light, or may light all
the time.
Please understand that this is not a malfunction.
Black or white dots
appear on the screen
33-34 3/29/2006 9:58:37 AM
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC LT-26X70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC LT-26X70 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC LT-26X70

JVC LT-26X70 User Manual - German - 21 pages

JVC LT-26X70 User Manual - Dutch - 21 pages

JVC LT-26X70 User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info