732078

JVC LT-26HG22U Manual

12
Zoom out
Zoom in
Previous page
1/132
Next page
12
Selecting the input source
Press INPUT SELECT to view a signal from
another device connected to your TV, such as a
VCR or DVD player. You can select each input
source depending on which input jacks you used to
connect your devices.
To select the video input source, press INPUT
SELECT or
/.
Then press ENTER within 6 seconds.
On-screen Language Selection
1
Select (unless you have already selected
when the set was first switched on) then press
.
Audio
Picture
Setup
Option
Lock
OSD Language
Power Management
Power On LED
Time Setup
Subtitle
Teletext
Common Interface
Reset TV Setting
English
Off
On
2
Press or to select the desired language.
3
Press MENU to exit the menu.
Station search
Warning! All previously saved channels are
deleted in Step 2. A new channel search then
starts automatically.
Preparation:
Make sure your antenna is connected to the antenna input
(see P.10). Select TV (see above). Then press MENU.
1
Select Channel Set Up option in
, then
press .
2
Select Auto Scan, then press .
Auto Scan
Update Scan
Channel Skip
Channel Sort
Channel Edit
Fine
Signal Status
3
TV will search for Digital TV-channels at first.
Continue with ENTER to start auto tuning.
Start
Note:
Press RETURN if you return to step 2.•
4
The automatic scanning will search for
available Digital TV-channels and should store
the channels in the correct order.
5
When all DVB-T programs have been stored
(100%), you will be asked if you want to
proceed to autotuning Analog TV-channels.
If you wish to start the tuning Analog cable-
TV channels. connect your Analog cable-TV
antenna and press ENTER.
TV will search for Analogue CH,
please connect aerial(RF) lead.
Then press “ENTER”.
100%
Note:
Press RETURN x 2 if you return to step 2.•
6
When all programs have been stored (100%),
press MENU to exit the menu.
Changing the order of stored channels
The Automatic station presetting stores the
stations in a specific order. However, this order
can be changed if you wish.
1
Press MENU. Select Channel Set Up option in
, then press .
2
Select desired option, then press .
Auto Scan
Update Scan
Channel Skip
Channel Sort
Channel Edit
Fine
Description about the each setting option:
Channel Skip: Press or to select the channel that you
want to skip, then press ENTER. mark will appear.
Channel Sort: Press or to select the channel that you
want to move, then press ENTER.
Press or to select the position that you want to move
the channel to, then press ENTER.
Channel Edit: Press or to select the channel that you
want to edit, then press ENTER.
Following options are displayed.
- Channel Number: Press 0-9 buttons to enter
the desired memory position number, then press
ENTER.
- Frequency (only for analogue TV): You can also
directly enter the frequency value with Number
buttons (0-9), then press ENTER.
- Colour system (only for analogue TV): Colour
System has already been preset to Auto.
Do not change anything here. Any changes can
cause picture or sound disruption.
- Sound system (only for analogue TV): The
correct sound system is already installed. Any
changes can cause sound disruption.
Fine (only for analogue TV): Already correctly and
optimally installed. Do not change anything here. Any
changes can cause picture or sound disruption. The video
can also be affected.
Signal Status (only for digital TV):You can verify the
signal strength and quality of the selected service here. If
necessary, adjust the direction of the antenna to obtain the
maximum signal strength.
3
Press MENU to exit the menu.
Update Scan
If you wish to search and store only new channel,
perform the Update Scan at step 2 of Station
search (on the left). The current channel store is
remained and only new channel will be stored to
channel store.
3BR1851A_EN.indd 123BR1851A_EN.indd 12 7/10/10 1:57:58 PM7/10/10 1:57:58 PM
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC LT-26HG22U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC LT-26HG22U in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 11,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info