617037
11
Zoom out
Zoom in
Previous page
1/28
Next page
11
Auto setup
Your television has an Automatic Tuning
System which makes tuning in your television
easy. This Automatic tuning System scans
the entire reception range in your area and
automatically stores all available analogue and
digital channels of suitable signal strength
in the correct order e.g. BBC1 will tune into
channel 1, BBC2 will tune into channel 2, etc.
Preparation:
Press (Power) on the unit or press (On/Standby) on
the remote.
1
Auto Installation menu will appear.
Press or to select desired language.
Then press
.
Auto Installation
Language
English
Deutsch
Français
Please select your language
then press “ENTER”
on your remote control:
2
Press or to select your country.
Then press
.
Country
UK
Germany
France
Auto Installation
Please select your country
then press “ENTER”
on your remote control:
3
Press or to select Home.
Then press
.
TV Location
Home
Store
Auto Installation
Please select where the TV will be
placed.
The picture will be optimized for
that location.
4
If you cancel Auto Power Off (see page 20),
press or to select Off. Then press
.
Auto Power Off
On
Off
Auto Installation
Your TV has been set to power off
after 4 hours of continuous viewing.
If you want to change this setting,
please choose Off.
This setting can also be changed in
the MENU.
5
TV will search for Digital TV-channels at first.
Connect your DVB-T antenna now.
Continue with ENTER to start auto tuning.
The tuning’s progress will be displayed in
percent for confirmation.
Channel Scan
Scan
Auto Installation
TV will search for Digital CH,
please connect aerial(RF) lead.
Press [ENTER] to start.
If you skip this step,
it can be installed at a later stage
in the MENU.
0%
Note:
Please be patient - the Auto Tuning process
can take several minutes to complete.
6
When the tuning for Digital TV-channels is
completed, you will be asked if you want
to proceed to autotuning for Analogue
TV-channels. If you wish to start autotune
Analogue TV-channels, connect your Analogue
cable-TV antenna and press ENTER.
Note:
If you do not wish to carry out the autotuning for
Analogue TV-channels, press RETURN to exit the
menu.
Channel Scan
Scan
Auto Installation
TV will search for Analogue CH,
please connect aerial(RF) lead.
Press [ENTER] to start.
If you skip this step,
it can be installed at a later stage
in the MENU.
100%
7
When the display reads 100%, press ENTER
to finish.
Note:
To cancel the auto tuning, press RETURN during the
process.
THE AUTOMATIC TUNING PROCESS WILL
ONLY START BY ITSELF THE FIRST TIME YOU
SWITCH THE SET ON. HOWEVER YOU CAN
RESTART THIS PROCESS VIA THE MENU
SYSTEM (see page 12).
If you could not set up a correct pair of language and
country in this auto setup process, you will be able to
make your preferred language selection as illustrated in
page 12 (On-screen Language Selection).
Quick guide for Menu operation
Make sure the antenna connection and power
supply are connected as per the description on
previous page.
Preparations:
Turn on the unit with the (Power) button on the unit.
The (On/Standby) indicator will light up in blue.
Call Menu and for example: Select Auto Scan.
1
Press INPUT SELECT. Select TV. Press MENU.
2
Press or to select
then press .
3
Press or to select Channel Set Up, then press .
Audio
Picture
Setup
Oi
Country
Audio Language
Audio Language 2nd
Channel Set Up
UK
English
English
If the channel which Channel Block (P.16) was set
exits, password entering screen will appear. Then
enter the password.
4
Press or to select Auto Scan.
Audio
Picture
Setup
Auto Scan
Update Scan
Channel Skip
Channel Sort
... on the following pages the MENU can be
called in the same way as here.
5
Press MENU to exit the menu.
Note:
If no buttons are pressed for more than approx. 60
seconds, the Menu screen disappears automatically.
3BQ1301A_EN.indd 113BQ1301A_EN.indd 11 8/25/10 2:17:29 PM8/25/10 2:17:29 PM
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC LT-26HG22J at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC LT-26HG22J in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info