57149
35
Zoom out
Zoom in
Previous page
1/39
Next page
English - 34 -
Via The Scart
This LCD TV has 2 SCART sockets. If you want
to connect peripherals (e.g. video, decoder,
etc.) which have SCART sockets to the TV, use
EXT 1 or EXT 2.
If an external device is connected via the SCART
sockets, the TV will be switched to AV mode
automatically.
Via Aerial Input
If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have a
SCART socket, you should connect it to the
AERIAL INPUT of the TV.
If the VCR is connected via Aerial input it is
suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of prog-
rammes. Most of them are free, others are to
be paid for by the viewer. This means that you
will need to subscribe to the broadcasting
organisation whose programmes you wish
to receive. This organisation will supply you a
corresponding decoder unit to allow the prog-
rammes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
Connect the decoder to the TV with a SCART
cable to the SCART socket.
TV and Video Recorder
Connect the aerial cables.
Better picture quality can be obtained if you also
connect a Scart cable to SCART sockets.
Playback NTSC
To use this option you can;
Connect an NTSC VCR player to a SCART
socket at the rear side of the TV.
Connect an NTSC VCR player to RCA Jacks
at the side of the TV.
Then, press AV button to select appropriate
source.
Copy Facility
Source selection for VCR recording.
 Select Feature menu.
 Select Ext-2 Out by pressing
 /  but-
ton.
 Select a source to copy the picture from that
source.
Search for and Store the Test
Signal of the Video Recorder
Unplug the aerial cable from the aerial socket
of your video recorder.
Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
Enter the Install menu and select search.
Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. Store the test sig-
nal under programme number 0.
Replace the aerial cable in the aerial socket
of your video recorder once you have stored
the test signal.
Camera and Camcorder
To Connect to AV Input
Connect your camera or camcorder to AV
(EXT-4) input at the right side of the TV.
Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You must connect the jacks to the
input using the same colour.
Connect the Decoder to the Video
Recorder
Some video recorders have a special SCART
socket for decoder.
Connect a SCART cable to the SCART socket
of your decoder and to the special SCART
socket of your video recorder. Refer to the
booklet of your video recorder.
A01-ENG-JVC (LT-26DY8ZG)-26815W-RMC1899S MB22 PANEU IDTV-(WO PIP)-(10052179)-5011xxxx.p6511.09.2007, 13:5034
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC LT-26DY8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC LT-26DY8 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC LT-26DY8

JVC LT-26DY8 User Manual - German - 43 pages

JVC LT-26DY8 User Manual - French - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info