512784
9
Zoom out
Zoom in
Previous page
1/32
Next page
English - 8 -
Viewing the Connections -
Side Connectors
CI Slot is used for 1.
inserting a CI card. A
CI card allows you to
view all the channels
that you subscribe to.
For more information,
see “Conditional
Access” section.
Component Video 2.
Inputs (YPbPr) are
used for connecting
component video.
You can connect the
component video
and audio sockets
with a device that
has component
output. Connect the
component video
cables between the
COMPONENT VIDEO
INPUTS on on the
TV and the component video outputs of your
device. While connecting, be sure that the
letters on your TV, “Y”, “Pb”, “Pr” correspond
with your device’s connectors.
IMPORTANT:Please do not connect a device to
PC socket while using YPbPr input.
Video Input 3. (INPUT FAV) is used for connecting
video signals of external devices.Connect the
video cable between the VIDEO IN socket
on the
TV and the VIDEO OUT jack on your
device.
Audio Inputs 4. (INPUT FAV) are used for
connecting audio signals of external devices.
Connect the audio cable between the
AUDIO
INPUTS on the TV and the AUDIO OUTPUT
jacks on your device.
Also to enable PC/YPbPr sound connection
in such a case, use an appropriate audio cable
between the connected device’s audio outputs
and the TV’s audio inputs
Note: If you connect a device to the TV via the
VIDEO or PC/YPbPr cable you should also
connect your device with an audio cable to the
AUDIO INPUTS of the TV to enable audio.
Headphone jack is used for connecting an 5.
external headphone to the system. Connect to
the HEADPHONE jack to listen to the TV from
headphones.
Standby switch is used for turning the TV on 6.
or of
f.
INPUT AV
Using the Cable Holder
You can use the supplied cable holder as the
following:
• Place the cable holder into the cable holder hole
located on the rear side of the TV as illustrated
above.
• Place cables into the cable holder after all necessary
connections are made.
Power Connection
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the
ambient room temperature before you connect the
set to the mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL
INPUT socket located at the rear of the TV.
SPDIF
SCART
VGA
Coax.OUT
HDMI 2
HDMI 1
A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 8A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 8 08.04.2010 08:47:2708.04.2010 08:47:27
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC LT-26DA20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC LT-26DA20 in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info