732083
25
Zoom out
Zoom in
Previous page
1/92
Next page
TV Troubleshooter
A check through the guide below could save you the trouble of returning your purchase or waiting for a
service engineer. If you require assistance with operating this product you can phone our help line during
normal office hours.
Turn the volume up. Press the mute
button to release 'mute'.
Crackling noises or distorted sound. nterference from cars, fluorescent lights,
video recorder, a radio broadcast, personal
computer or other equipment.
Turn off one piece of equipment at a
time to see if the interference clears.
See also what to do for picture
interference.
Analogue TV & general
Analogue TV & general Picture
Sound
Symptoms
Symptoms
Grainy (snowy) picture
Possible causes
Possible causes
What to do
What to do
No sound
The volume is set to minimum. The mute is
switched on.
Stereo switching to mono. Aweak signal or a mono broadcast. Check the signal and your aerial
system.
No stereo sound from equipment
connected to the scart (AV) socket.
A mono scart lead is being used to connect
the television. The signal being viewed is
connected through the aerial socket.
Check that the scart lead is stereo.
Check the video recorder is
connected to the television through
an AV (scart) lead, then switch the
television to AV mode.
Cl disconnected.
Your video recorder could be faulty.
Transmitter trouble.
The outside aerial has moved, or is
damaged.
If you have a video recorder try
plugging the aerial directly into the
television. If the fault clears, the
video recorder is probably faulty.
Have your aerial system checked.
Extra outlines on objects in the picture
(ghosts).
The aerial is receiving reflected signals
from hills or buildings. Faulty aerial
system.
Try to tune in a better signal from
the same television station.
Get your aerial system checked.
Picture interference like spots or
streaks.
Weak aerial signal. Interference from
electrical equipment such as power
tools and motors.
Settings for the digital video equipment
output do not match the monitors VGA
or DVI input specifications.
Try to tune in a better signal from
the same television station. Get
your aerial system checked. Move
the interfering equipment further
away or if possible, turn it off.
Change the refresh rate or
resolution settings on the digital
equipment, if possible.
Picture is the wrong size or the source
device (computer, DVD player, set top
box and so on) will not let you set up the
pixel resolution the display can
reproduce.
Source device has not read the set-up
data from the display. Connecting cable
does not have all the necessary
connections.
Avoid old cables and adapter
devices. Use only modern cables.
Re-start the source device after
connecting and powering up the
display. Change the graphics
adapter in your computer. Check
compatible video resolutions given
in these instructions.
Troubleshooting table
EN
25
EN
Downloaded from www.vandenborre.be
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC LT-24HA72U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC LT-24HA72U in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 44,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info