163535
27
Zoom out
Zoom in
Previous page
1/154
Next page
27
ENGLISH
To set Custom Equalizer Link – CEQ LINK
A different sound mode (C-EQ) can be stored in
memory for each source so that you can change
the sound modes simply by changing the sources.
When shipped from the factory, this mode is
deactivated.
LINK ON: Different sound modes for different
sources.
LINK OFF: One sound mode for all sources.
To set the clock display – CLOCK
You can set the clock to be shown on the display
when the unit is turned on.
When shipped from the factory, the clock is set to
be shown on the display.
ON: Clock display is turned on.
OFF: Clock display is turned off. When
“OFF” is selected, the current source
name or station band appears
instead of the clock
display (except
when
“LINE IN” is selected as the
source)
.
To select the level meter – LEVEL
You can select the level display according to your
preference.
When shipped from the factory, “AUDIO 2” is
selected.
AUDIO 1: Level meter illuminates from bottom
to top.
AUDIO 2: Alternates level meter (moves from
bottom to top) and illumination
display.
OFF: Erases the audio level meter.
To select the dimmer modeDIMMER
(only for KS-LH6R)
When you turn on the car headlights, the display
automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer
mode is activated.
AUTO: Activates Auto Dimmer.
OFF: Cancels Auto Dimmer.
ON: Always dims the display.
Note:
Auto Dimmer equipped with this unit may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF.
To select the telephone muting – TEL
This mode is used when a cellular phone system is
connected. Depending on the phone system used,
select either “MUTING 1” or “MUTING 2, whichever
mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.
MUTING 1: Select this if this setting can mute
the sounds.
MUTING 2: Select this if this setting can mute
the sounds.
OFF: Cancels the telephone muting.
To turn on/off the key-touch tone – BEEP
(only for KS-LH6R)
You can deactivate the key-touch tone if you do not
want it to beep each time you press a button.
When shipped from the factory, the key-touch tone
is activated.
ON: Activates the key-touch tone.
OFF: Deactivates the key-touch tone.
To select the external component to use
EXT IN
You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select which
component – CD changer or external component
– to use.
When shipped from the factory, CD changer is
selected as the external component.
LINE IN: To use the external component other
than CD changer.
CHANGER: To use the CD changer.
Note:
For connecting the Line Input Adaptor KS-U57 and the
external component, refer to the Installation/Connection
Manual (separate volume).
EN25-28KS-LH6R_LH4R[E]f.pm5 1/29/02, 9:55 AM27
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC ks-lh4r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC ks-lh4r in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info