28908
56
Zoom out
Zoom in
Previous page
1/58
Next page
56
ENGLISH
What appears to be trouble is not always serious. Check the following points before calling a
service center.
TROUBLESHOOTING
Symptoms
CD cannot be played back.
CD or MD sound is sometimes
interrupted.
Sound cannot be heard from the
speakers.
SSM (Strong-station Sequential
Memory) automatic preset does
not work.
Static noise while listening to the
radio.
“NO DISC” appears on the display.
“RESET 8” appears on the display.
“RESET 1-RESET 7” appears on
the display.
“DISC ERROR” appears on the
display.
“BLANK DISC” appears on the
display.
“NO DISC” appears on the display.
“NO NAME” appears on the
display.
“HIGH TEMP” appears on the
display.
Nothing appears on the display.
“NO PRE ADJ. appears on the
display.
The unit does not work at all
Causes
CD is inserted upside down.
You are driving on rough roads.
The disc is scratched.
Connections are incorrect.
The volume control is turned to the
minimum level.
Connections are incorrect.
Signals are too weak.
The antenna is not connected firmly.
No CD is in the loading slot (or in the
magazine).
The CD is inserted incorrectly.
This unit is not connected to a CD
changer correctly.
An error occurs while playing a CD
or an MD.
You have inserted a blank disc.
You have pressed MD/CD when
there was no CD or MD inside the
unit.
You have pressed DISP with a disc
for which no name was assigned.
The temperature inside the unit
becomes very high.
The connectors are dirty.
Preset adjustments have been lost or
damaged due to noise interference,
etc.
The built-in microcomputer may
function incorrectly due to noise, etc.
Remedies
Insert the CD correctly.
Stop playing CD or MD while driving
on rough roads.
Change the disc.
Check the cords and connections.
Adjust it to the optimum level.
Check the cords and connections.
Store stations manually.
Connect the antenna firmly.
Insert a CD.
Insert it correctly.
Connect this unit and the CD
changer correctly and press the
reset button of the CD changer.
Press the reset button of the CD
changer.
Press 0, then reinsert the disc.
Insert a recorded MD.
Insert a CD or an MD.
Assign a name to the disc.
Switch the source to the tuner and
wait until the temperature decreases.
Clean the connectors periodically
(once a month).
Contact the shop where you have
purchased the unit or a service
center.
Press the reset button on the front
panel. (See page 2.)
EN54-57.KD-MX2900R[E]/F 00.1.26, 8:54 PM56
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC KDMX2900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC KDMX2900R in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info