167171

JVC kd sx1500 r dab Manual

38
Zoom out
Zoom in
Previous page
1/194
Next page
38
ENGLISH
To change the display information while tuning into an
ensemble
Normally service name and ensemble name is shown on the display.
If you want to check other information, press DISP.
Each time you press the button, the following information appears for a while on the display.
To tune in a particular ensemble without searching:
1 Press DAB repeatedly to select the DAB band (DAB 1, DAB 2, or DAB 3).
2 Press and hold
¢ or 4
until “Manual” starts flashing on the display.
Now you can manually change the frequency while “Manual” is flashing.
3 Press ¢ or 4
repeatedly until the ensemble you want is reached.
• If you hold down the button, the frequency keeps changing until you release the button.
4 Press 5 or ∞
to select the service you want.
Selecting available tuning range
DAB services are broadcast on the following frequency bands — VHF (BAND III): 174 to 240
MHz, L-BAND: 1452 to 1492 MHz.
In some areas, only one of them are used for broadcasting. So, if you know which band is
used in your area, you can select one of or both of these frequency bands as the tuning range
of DAB band of this unit. If you set the tuning range correctly, tuning or searching speed will
become faster. When shipped from the factory, the tuning range for each DAB band has been
set to “VHF & L-BAND.”
• REMEMBER if you do the following operation, the microcomputer built-in the DAB tuner will
be reset to the initial settings.
1 Press and hold DAB for more than 2 seconds.
2 Rotate the control dial to select a proper frequency band for the DAB band in your area.
3 Press and hold DAB for more than 2 seconds again to finish the setting.
* Each service can have several PTY codes and
can use two types of PTY code — “Static PTY”
and “Dynamic PTY.” Static PTY does not
change for the service and shows what program
this service is, for example, “Pop Music” or
“Rock Music.” On the other hand, Dynamic
PTY changes as the service goes on to show
its actual and current contents. When Dynamic
PTY is shown on the display, it flashes.
** Dynamic Label Segment (DLS): Text
information sent with the tuned service. Not
displayed when “DAB Text” is set to “Off.”
(See page 46.)
*** Not displayed when “Level Meter” is set to
“Level Meter Off.” (See page 28.)
Service name / Ensemble name
Service name / PTY (Prpgram Type) *
Service name / “Primary” or “Secondary”/
Band / Preset number
Dynamic Label Segment **
Service name / Level meter ***
Service name / Clock time
Ensemble name / Frequency / Channel no.
VHF & L Band
–
L Band
VHF
–
EN37-46.KD-SX1500/f 99.4.26, 10:33 AM38
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC kd sx1500 r dab at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC kd sx1500 r dab in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info