167171

JVC kd sx1500 r dab Manual

25
Zoom out
Zoom in
Previous page
1/194
Next page
25
ENGLISH
When this function is turned on (the CRUISE indicator lights up on the display), the proper
volume level is automatically selected among the 3 possible levels according to the driving
speed, and the selected level is shown on the display.
To adjust the volume increase rate
If you find Audio Cruise increases (or decreases) the volume either too much or too little as
the driving speed changes. You can adjust the increase rate by changing the boost level.
To change it, follow the procedure below.
1 Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the display.
2 Press
¢ or 4 repeatedly until “Cruise Mode” appears, if not shown on the
display.
The current setting for this function also appears.
3 Rotate the control dial to select either “Cruise 1” or “Cruise 2.”
4 Press
¢ twice (or 4 repeatedly) so that “Boost” (with its current setting level)
appears on the lower part of the display.
5 Rotate the control dial to select the boost level (among 01 to 15) you want while the current
boost level is shown on the display.
6 Press SEL to finish the setting.
If Audio Cruise does not function correctly
You may need to store the idling speed into memory to make Audio Cruise function correctly.
NOTICE that a number of factors, such as electric power steering, wipers, power windows, air
conditioner, etc. do generate noises and, as a result, may cause Audio Cruise not to function correctly.
If this is the main cause of malfunction, connect the memory backup lead (yellow lead) directly to the
car battery to prevent these noises from affecting Audio Cruise.
1 Start the engine and let it warm up.
2 Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the display.
3 Press
¢ or 4 repeatedly until “Cruise Mode” appears, if not shown on the
display.
The current setting for this function also appears.
4 Rotate the control dial to select either “Cruise 1” or “Cruise 2.”
5 Press
¢ once (or 4 repeatedly) so that “+ OR – RPM Set” appears on the lower
part of the display.
6 Rotate the control dial to select the idling speed you want.
“Memory” flashes for a while.
• If “No Input” flashes on the lower part of the display, check to see if the connection is
correct.
7 Press SEL to finish the setting.
When the setting is complete, the unit automatically checks to see if Audio Cruise functions
correctly with this new idling setting. If it does not function correctly, Audio Cruise is canceled
automatically and the idling setting becomes invalid.
• If this happens, see the NOTICE above.
When the driving speed increases.
When the driving speed decreases.
EN23-30.KD-SX1500/f 99.4.26, 10:31 AM25
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC kd sx1500 r dab at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC kd sx1500 r dab in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info