167164
11
Zoom out
Zoom in
Previous page
1/162
Next page
11
ENGLISH
To use Network-Tracking Reception, press and
hold TP (traffic programme) for more than 1 second.
Each time you press and hold the button, Network-
Tracking Reception modes change as follows:
Mode 1
Network-Tracking Reception is activated with
Regionalization set to “off.
Switches to another station within the same
network when the receiving signals from the
current station become weak.
In this mode, the programme may differ from the one
currently received.
Mode 2
Network-Tracking Reception is activated with
Regionalization set to “on.
Switches to another station, within the same
network, broadcasting the same programme
when the receiving signals from the current
station become weak.
Mode 3
Network-Tracking Reception is deactivated.
Note:
If a DAB tuner is connected and Alternative Reception
(for DAB services) is activated, Network-Tracking
Reception is also activated automatically. On the other
hand, Networking-Tracking Reception cannot be
deactivated without deactivating Alternative Reception.
(See page 37.)
What you can do with RDS EON
RDS (Radio Data System) allows FM stations to
send an additional signal along with their regular
programme signals. For example, the stations send
their station names, as well as information about
what type of programme they broadcast, such as
sports or music, etc.
Another advantage of RDS function is called “EON
(Enhanced Other Networks).The EON indicator
lights up while receiving an FM station with the EON
data. By using the EON data sent from a station,
you can tune into a different station of a different
network broadcasting your favorite programme or
traffic announcement while listening to another
programme or to another source such as CD.
By receiving the RDS data, this unit can do the
following:
Tracing the same programme automatically
(Network-Tracking Reception)
Standby Reception of TA (Traffic
Announcement) or your favorite programme
PTY (Programme Type) search
Programme search
And some other functions
Tracing the same programme
automatically (Network-Tracking
Reception)
When driving in an area where FM reception is not
good, the tuner built in this unit automatically tunes
into another RDS station, broadcasting the same
programme with stronger signals. So, you can
continue to listen to the same programme in its
finest reception, no matter where you drive. (See
the illustration on the next page.)
Two types of the RDS data are used to make
Network-Tracking Reception work correctly — PI
(Programme Identification) and AF (Alternative
Frequency).
Without receiving these data correctly from the RDS
station you are listening to, Network-Tracking
Reception will not operate.
REG indicator
AF indicator
AF REG
indicator indicator
Mode 3
Mode 2
Mode 1
: lights : goes off
Mode 1 Mode 2 Mode 3
(AF)
(AF/REG) (Canceled)
RDS OPERATIONS
EN11-16KD-SH77R/55R[E] 2/9/01, 3:55 PM11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC kd sh55r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC kd sh55r in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info