97710

JVC KD-LX330 Manual

27
Zoom out
Zoom in
Previous page
1/170
Next page
27
ENGLISH
If Audio Cruise does not function correctly
You may need to store the idling speed into
memory to make Audio Cruise function correctly.
NOTICE that a number of factors, such as
electric power steering, wipers, power
windows, air conditioner, etc. do generate
noises and, as a result, may cause Audio
Cruise not to function correctly. If this is the
main cause of malfunction, connect the
memory backup lead (yellow lead) directly to
the car battery to prevent these noises from
affecting Audio Cruise.
1 Start the engine and let it warm up.
2 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
3 Press ¢ or 4 repeatedly until
“CRUISE MODE” appears on the display.
4 Turn the control dial to select either “CRUISE 1”
or “CRUISE 2.”
5 Press ¢ (or 4 ) to select “+OR–
RPM SET.”
6 Turn the control dial to select the desired idling
speed.
7 Press SEL (select) to finish the setting.
When the setting is complete, the unit
automatically checks to see if Audio Cruise
functions correctly with this new idling setting. If it
does not function correctly, Audio Cruise is
canceled automatically and the idling setting
becomes invalid.
• If this happens, see the NOTICE above.
4
Press SEL (select) to finish the
setting.
When this function is turned on (the CRUISE
indicator lights up on the display), the proper
volume level is automatically selected among the
3 possible levels according to the driving speed,
and the selected level is shown on the display.
To adjust the volume increase rate
If you find Audio Cruise increases (or decreases)
the volume either too much or too little as the
driving speed changes, you can adjust the
increase rate by changing the boost level.
To change it, follow the procedure below.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2 Press ¢ or 4 repeatedly until
“CRUISE MODE” appears on the display.
3 Turn the control dial to select either “CRUISE 1”
or “CRUISE 2.”
4 Press ¢ (or 4 ) to select “BOOST.”
The current boost level also appears on the
display.
5 Turn the control dial to select the desired boost
level (among 01 to 15).
6 Press SEL (select) to finish the setting.
When the driving speed increases.
When the driving speed decreases.
EN22-31.KD-LX330R[E]f 2/5/01, 10:10 AM27
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC KD-LX330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC KD-LX330 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info