709275
41
Zoom out
Zoom in
Previous page
1/140
Next page
Basic Shooting
Procedures
Preparations
.
3
1
MODE
POWER
ON
OFF
4
2
4
1
Supply battery or AC adapter power to the
camera recorder.
(A P
24 [Power Supply] )
2
Insert an SD card.
(
A P35 [SD Card] )
3
Turn on the power of the camera recorder.
Hold down the lock button (blue) at the center of
the [POWER ON/OFF] switch to set to “ON”. The
camera recorder starts up in Camera mode and
is ready for recording.
4
Adjust the angle of the LCD monitor and
viewfinder.
(A P32 [Adjusting the LCD Monitor and
Viewfinder] )
Shooting
1
Configure the video and audio input
settings.
0
Set
the
[FULL AUTO ON/OFF] switch to “ON”
to enter Full Auto mode. This mode adjusts
the Iris, Gain, Shutter and White Balance
automatically.
0
The audio
recording level is also set to Auto,
and audio from the built-in microphone is
recorded in the Full Auto mode.
0
The a icon appears at the lower center area
of the LCD in the Full Auto mode.
.
AE+6
12 :34 :56
Jan 12, 2016
00: 00: 00.00
4030 20 10 0
P13000K
Memo :
0
To set each individual video setting item
automatically or manually, and to carry out the
audio input settings and the audio recording
level adjustment, refer to the following.
0
[Adjusting the Brightness] (A P 50)
0
[Adjusting the Iris] (
A P 50)
0
[Setting the Gain] (A P 51)
0
[Setting the Electronic Shutter] (A P 52)
0
[Adjusting the White Balance] (A P 53)
0
[Adjusting Audio Recording Level]
(A P 58)
2
Press the [REC]
button to start recording to
the SD card.
This camera recorder has three [REC]
buttons.
Any of the [REC] buttons can be used to start/
stop recording by default.
The tally lamp lights up in red during recording.
0
Zoom Operation
(A P
43 [Zoom Operation] )
0
Adjusting the Focus
(
A P45 [Focus Operation] )
Memo :
0
If both
the slots are loaded with recordable cards
in the factory default, pressing the [REC] button
starts recording only to the media in the selected
slot.
When [Main Menu] B [System] B [Record Set]
B [Slot Mode] is set to “Dual”, recording can be
performed simultaneously to the cards in both
the slots.
(A P68
[Dual Rec] )
0
The tally lamp can be turned off in [System]
B
[Tally Lamp].
(A P104
[ Tally Lamp ] )
3
Check the most recently captured images.
0
Press
the
[C.REVIEW/7] button on the lens to
activate the Clip Review function. The most
recently captured images are played back on
the LCD monitor and viewfinder screen.
0
After playback, the camera recorder returns
to standby mode (STBY).
(A P66 [Viewing Recorded Videos
Immediately (Clip Review)] )
Memo :
0
[Clip Review] is assigned to
[C.REVIEW/7]
button in factory default.
0
[Clip Review
] can also be assigned to other user
buttons.
(A P34 [Assignment of Functions to User
Buttons] )
Basic Shooting Procedures
41
Shooting
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC JY-HM360E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC JY-HM360E in the language / languages: English as an attachment in your email.

The manual is 10,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info