709275
27
Zoom out
Zoom in
Previous page
1/140
Next page
Menu Screen
(A P86 [Display and Description of the Menu
Screen] )
.
Warnings by Lamp and Warning Tone
Warning status is indicated by tally lamp and
warning tone.
0
The tally lamp blinks.
0
The warning tone is output from the monitor
speaker or [x] terminal.
Memo :
0
You can specify whether to turn on the warning
tone as
well as setting the volume in [A/V Set] B
[Audio Set] B [Alarm Level].
(A P103
[ Alarm Level ] )
0
If you
continue to use the camera recorder while
the power warning is displayed, the camera
recorder will stop automatically when the battery
or supplied voltage from the AC adapter
becomes lower.
Caution :
0
The remaining battery power and time are
displayed as they are from the battery
information. Accurate
data may not be displayed
depending on the battery condition. Replace the
battery as soon as possible when the remaining
battery power and time are low.
Turning On/Off the Power
Turning On the Power
1
Hold down the lock button (blue) at the
center of the [POWER ON/OFF] switch to set
to “ON”.
The camera recorder starts up in Camera mode
and is ready for shooting.
Memo :
0
The camera
recorder always start up in Camera
mode when the [POWER ON/OFF] switch is set
to “ON”. Use the [MODE] button at the side of
the camera recorder to switch mode.
(A
P14 [Operation Modes] )
.
TIME CODE
MODE
POWER
ON
OFF
Turning Off the Power
Sets the camera recorder to the recording standby
or stop mode.
1
Hold down the lock button (blue) at the
center of the [POWER ON/OFF] switch to set
to “OFF”.
2
Remove the battery and the power to the
[DC] terminal (when not in use for a long
time).
Auto Power Off function
When [System]
B [Auto Power Off] is set to “On
”,
the power turns off automatically when the camera
recorder is not operated for 5 minutes or longer
while running on battery.
(A P104 [ Auto Power Off ] )
Memo :
0
When both the battery and AC adapter are
connected, power from the AC adapter
connection will be used. As such, the
[Auto
Power Off] function will not have any effect.
Caution :
0
Do not set the [POWER ON/OFF] switch to
“OFF
” during recording. Check that the
operation mode display is “STBY” or “STOP”
before you turn off the power.
0
If you have mistakenly set the
[
POWER ON/
OFF] switch to “OFF” during recording, wait for
5 seconds or more before you turn on the power
again.
0
When turning off the power, first set the
[POWER ON/OFF
] switch of the camera
recorder
to “OFF”. Do not remove the battery or
turn off the AC power while the [POWER
ON/OFF] switch is set to “ON”.
Power Status Display
27
Preparations
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC JY-HM360E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC JY-HM360E in the language / languages: English as an attachment in your email.

The manual is 10,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info