158775
29
Zoom out
Zoom in
Previous page
1/36
Next page
Continued I_
UsingRecordingTimer
With Recording Timer, you can make a tape of a radio
broadcast automatically.
HowRecordingTimer actuallyworks
The unit automatically turns on, tunes in to the specified
station, sets the volume level to "VOLUME MIN," and starts
recording when the on-time comes. ("REC" and the REC
indicator flash just before the on-time, and the REC indicator
continues flashing while the timer is operating). Then, when
the off-time comes ("REC OFF" appears just before the off-
time), the unit automatically turns off (on standby).
The timer setting remains in memory until you change it.
There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step ,2again.
To correct a misentry while setting the timer, press
CANCEL/DEMO.
On the unit ONLY:
1 Insert a recordable cassette with the exposed
part of the tape down.
2 Press CLOCK/TIMER _o_
repeatedly until "REC"
appears on the display.
The @ (Timer) indicator lights up andthe REC (Recording
Timer) indicator also starts flashing on the display.
PE[
Each time you press the button, the timer setting modes
change as follows:
DAILY "-_ TIMER --"
_" (Daily Timer setting) j
L_ Canceled --,- Clock 4- TIMER
setting (Recording Timer setting)
(The hour digits start flashing.)
3 Press CLOCK/TIMER again.
"TIMER" appears for 2 seconds, then the
unit enters on-time setting mode.
A AAAA
I--II_I I_II_d I I--I
I_II_I I I I LI
TTTT
4 Set the on-time you want the
unit to turn on at.
1) Turn _ / _ to set the hour, then
press SET/DISPLAY.
"SET" appears for 1 second.
2) Turn _ / _ to set the minute,
then press SET/DISPLAY.
"SET" appears for 1 second, then
the unit enters off-time setting mode.
SET/
DISPLAY
uFF ,,, u
TTTTT
5 Set the off-time you want the unit to turn off
(on standby) at.
1) Turn _ / _ to set the hour, then press
SET/DISPLAY.
"SET" appears for 1 second.
2) Turn _ / _ to set the minute, then press
SET/DISPLAY.
"SET" appears for 1 second, then the unit enters preset
station selecting mode.
6 Select the preset station.
1) Turn _ / _ to select the band ("TUNER FM" or
"TUNER AM"), then press SET/DISPLAY.
"SET" appears for 1 second.
2) Turn _ / _ to select a preset channel number,
then press SET/DISPLAY.
The REC (Recording Timer) indicator stops flashing
and remains lit. "OK _/" appears on the display for
2 seconds.
The settings you have done are shown on the display
in sequence for your confirmation.
7 Press Oil to turn off the unit (on
standby) if necessary.
If you want to listen toanother source whilerecording
PressREC START/STOPor to stop recording. Without
stopping it, you cannot change thesource.
Even ifyou unplug theAC power cord or if apower failure
occurs
Once you set the timer, thetimersetting may remain stored in
memoryfor afew days. In thiscase, checkwhether the timer
setting still remains or not.
- 26 -
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC hx z 3 r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC hx z 3 r in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info