30453
172
Zoom out
Zoom in
Previous page
1/192
Next page
Filename [XVS44U_10Subsidiary.fm]
Masterpage:Left+
76
EN
Page 76 25 August 2003 3:29 pm
SUBSIDIARY SETTINGS (cont.)
* The default setting is bold in the table below.
8 S-VHS ET
ON
OFF
You can record in SP mode on VHS cassettes with S-VHS picture quality. You can
play back a tape recorded using the S-VHS ET function on most of S-VHS recorders
and of VHS recorders equipped with SQPB (S-VHS QUASI PLAYBACK) function.
(Notice some recorders are not compatible with the S-VHS ET function.)
When this function is set to “ON”, the S-VHS indicator lights up on the front
display panel.
NOTES:
You can activate the S-VHS ET function only before you start recording on a VHS cassette.
Before recording, make sure that “VIDEO CALIBRATION” is set to “ON”. (
below)
You cannot activate the S-VHS ET function:
— while recording is in progress.
— while timer-recording or Instant Timer Recording (
pg. 33, 36) is in progress.
— while Video Calibration (
pg. 35) is in progress.
The S-VHS ET function does not work with S-VHS cassettes.
To keep the highest quality recording and playback pictures over a long period of time,
S-VHS recording on S-VHS cassettes is recommended.
Use of high grade tapes is recommended for S-VHS ET recordings. On some tapes, picture
quality will not improve even if the S-VHS ET function is used. Check the recording quality
before you start important recordings.
While playing back a tape recorded using the S-VHS ET function on some recorders, noise
may appear. (If playback picture becomes blurred or interrupted, use a cleaning cassette.)
In the variable speed search, still, slow-motion or frame-by-frame playback modes
(
pg. 29), noise may appear. If these modes are performed frequently on a tape recorded
using the S-VHS ET function, the tape may be damaged and the picture may be
deteriorated.
8 VIDEO CALIBRATION
ON
OFF
When this function is set to “ON”, this unit checks the condition of the tape in use
during playback and recording, and compensates to provide the highest-possible
pictures. This takes place whenever you play back a tape or start recording after
inserting a tape. (
pg. 35)
8 PICTURE CONTROL
AUTO
EDIT
SOFT
SHARP
This feature helps you to adjust the playback picture quality according to your
preference. Normally select “AUTO”.
AUTO
: Provides the optimised picture benefits of the VIDEO CALIBRATION
Picture System.
EDIT
: Minimizes picture degradation during editing (recording and playback).
SOFT
: Reduces image coarseness when viewing overplayed tapes containing a
lot of noise.
SHARP
Clearer, sharper-edged picture when viewing images with lots of flat,
same-coloured surfaces such as cartoons.
NOTES:
When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not change until you
select another mode.
When you select “EDIT” to dub tapes, be sure to select “AUTO” after you finish dubbing the
tapes.
When “VIDEO CALIBRATION” is “OFF”, “PICTURE CONTROL” switches automatically
from “AUTO” to “NORM”.
XVS44U_10Subsidiary.fm Page 76 Monday, August 25, 2003 3:29 PM
172


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HRXVC33U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HRXVC33U in the language / languages: English as an attachment in your email.

The manual is 11,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info