31001
5
Zoom out
Zoom in
Previous page
1/44
Next page
EN 5
If you are using the on-
screen display, the
AUTO SET screen will
appear. As Auto Set Up
progresses, the " "
mark on the screen
moves from left to
right.
CONFIRM/SET VIDEO CHANNEL
6
If you have connected the video recorder to your TV
via an RF cable only (RF connection)
The channel that is shown on the display panel is your
Video Channel.
To view picture signals from the video recorder, set
your TV to the Video Channel. — Refer to the
instructions supplied with your TV set for how to do
this.
If you have selected MAGYARORSZAG (36), CESKA
REPUBLIKA (42), POLSKA (48) or OTHER EASTERN
EUROPE (EE) in step 2 on page 4, "2OUT" appears in
stead of "1OUT".
If you have connected the video recorder to your TV
via both an RF cable and a 21-pin SCART cable (AV
connection)
You do not need the video channel so you have to set
the video channel to off.
Press TV PROG – until the display panel shows
"1OUT– –" to set the Video Channel to off.
To view picture signals from the video recorder, set
your TV to its AV mode. — Refer to the instructions
supplied with your TV set for how to do this.
FINISH AUTO SET UP
7
Press OK.
SELECT LANGUAGE
3
Press OK. The Language Set display appears on the
front display panel and/or on the screen.
If you are referring to the front display panel
Press
%
to select your language code.
If you are referring to
the on-screen display
Press
%
to move the
highlight bar (pointer) to
the language of your
choice.
SET DATE AND TIME
4
Press OK. The Clock Set
screen appears.
Press
%
to set the time,
then press OK or
#
.
The "date" display begins
blinking. Repeat the same
procedure to set the date
and year.
When you set the time,
press and hold
%
to change the time by 30 minutes.
When you set the date, press and hold
%
to change
the date by 15 days.
PERFORM AUTO SET UP
5
Press MENU.
If you are referring to the front display panel
Press
%
to select "Auto" and press OK or
#
.
If you are referring to the on-screen display
Press
%
to move the
high-light bar (pointer) to
"AUTO SET" and press OK
or
#
.
"Auto" blinks on the display panel; do NOT press
any button on the recorder or remote control until
the display panel shows either the display as
illustrated in step 6 or "– –:– –".
NOTES:
Auto channel set function takes place first; it assigns automati-
cally all receivable stations in your area.
During auto channel set, the recorder recognizes each station
name of the detected stations and stores them in the
recorder's memory.
For RF connection users: The video recorder detects the
channels which are not occupied by local stations and selects
one channel automatically for your Video Channel that is
located in the middle of more than 5 vacant channels.
If there is a power cut, or if you press or MENU while Auto
Set Up is in progress, Auto Set Up will be interrupted; be sure
to turn off the recorder power once and try again from step 1.
(Ex.) DEUTSCH is selected for SUISSE
(Ex.) DEUTSCH is selected
NÄCHSTE SEITE
NORSK
SVENSKA
NEDERLANDS
CASTELLANO
ITALIANO
FRANCAIS
DEUTSCH
ENGLISH
[
5
] =
[MENU] : ENDE
International telephone
country code
Language code
Language Code
ENGLISH : 01 NORSK : 08
DEUTSCH : 02 SUOMI : 09
FRANCAIS : 03 DANSK : 10
ITALIANO : 04 POLSKI : 11
CASTELLANO : 05 E TINA : 12
NEDERLANDS : 06 MAGYAR : 13
SVENSKA : 07
AUTO SET
T-V LINK
[
5
] =
[MENU] : EXIT
AUTO SET
PLEASE WAIT
[MENU] : EXIT
0
+++
Beginning
End
CLOCK SET
TIME DATE YEAR
0: 00 01 . 01 99
[
5
] =
[MENU] : EXIT
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HRJ260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HRJ260 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info