138393
37
Zoom out
Zoom in
Previous page
1/72
Next page
Masterpage:Right-No-Heading
37
Filename [XV48EK_08DVD.fm]
Page 37 18 November 2004 10:44 pm
Sound Effect
Using the Sound Effect function, you can change the sound field.
This function works only for analog audio output.
A
Access the selection menu.
Press SOUND EFFECT during playback.
The current setting appears on the TV screen.
B
Select the Sound Effect mode.
Press SOUND EFFECT repeatedly to select the desired
mode.
Each time you press SOUND EFFECT, the Sound Effect mode
changes as follows:
SOUND EFFECT:1]SOUND EFFECT:2]
SOUND EFFECT:3]OFF](Back to the beginning)
As the value becomes bigger, the Sound Effect works stronger.
The selection menu disappears if no operation is done for
about several seconds.
To deactivate Sound Effect
Press SOUND EFFECT
repeatedly until “OFF” appears on
the TV screen.
VFP Function
Adjusting the Picture Quality
The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programming,
picture tone or personal preference.
A
Access the VFP setting menu.
B
Select the VFP mode.
Press we repeatedly.
Each time you press we, the VFP mode changes as follows:
NORMAL]CINEMA]USER 1]USER 2](Back to the
beginning)
To adjust picture appearance manually
C
Access the USER menu.
Press we repeatedly to select “USER 1” or “USER 2.
D
Select the parameter.
Press rt repeatedly to select a parameter you want to
adjust, then press ENTER.
Adjust gradually and confirm picture appearance results are as
preferred.
VFP menu disappears and the following pop-up window
appears on the TV screen.
E
Adjust the parameter.
Press rt repeatedly to change the setting, then press
ENTER.
The current VFP settings appear again.
Repeat steps D and E to adjust other parameters.
To return to the normal screen
Press DVD PICTURE.
NOTE:
The VFP setting screen disappears if no operation is done for
more than about 10 seconds.
Press DVD PICTURE during
playback.
The current setting appears on
the TV screen.
NORMAL: For watching TV in a general room.
CINEMA: For watching a movie software in a room
with suppressed light.
USER 1/
USER 2:
You can adjust parameters that affect the
picture appearance and store the settings. Go
to step
C.
GAMMA
(LOW/MID/
HIGH):
Adjust this if the neutral color is bright or dark.
The brightness of dark and bright portions is
maintained.
BRIGHTNESS
(–16 to +16):
Adjust this if the picture is bright or dark on
the whole.
CONTRAST
(–12 to +12):
Adjust this if the objects in far and near
positions look unnatural.
SATURATION
(–16 to +16):
Adjust this if the picture is whitish or blackish.
TINT
(–16 to +16):
Adjust this if the appearance of flesh tone is
unnatural.
SHARPNESS
(LOW/ HIGH):
Adjust this if the picture is indistinct.
YDELAY
(–2 to +2):
Adjust this if the picture looks separately or
overlapped.
XV48EK_01.book Page 37 Thursday, November 18, 2004 10:45 PM
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC hr xv48ex at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC hr xv48ex in the language / languages: English, German as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info