138393
12
Zoom out
Zoom in
Previous page
1/72
Next page
Filename [XV48EK_06Index.fm]
Masterpage:Left0
12
Page 12 November 18, 2004 10:45 pm
INITIAL SETTINGS
Auto Set Up
Auto Channel Set/Auto Clock Set/
Auto Guide Program Number Set
A
Turn on the unit.
Press 1 on the unit or remote control.
B
Perform Auto Set Up.
The AUTO SET/T-V LINK display appears on the TV
screen.
.
When you have connected the unit to a TV offering T-V Link
via a fully-wired 21-pin SCART cable (
pg. 11) and the TV is
turned on, the unit automatically performs the Preset
Download (
pg. 13) even if you select “AUTO SET” for Auto
Set Up function.
C
Confirm/Set video channel.
With RF Connection
The video channel that is
blinking on the front display
panel is your video channel. Press ENTER.
To view picture signals from the unit, set your TV to the video
channel.
With AV Connection
Press PR – until the front
display panel shows “– –.
Now the video channel is set to off. Then press ENTER.
To view picture signals from the unit, set your TV to its AV
mode.
NOTES:
In areas where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto
Clock Set nor Auto Guide Program Number Set.
If there is a power cut, or if you press 1 or SET UP while Auto
Set Up is in progress, Auto Set Up will be interrupted; be sure
to turn off the unit power once and try again from step A.
Auto Clock Set may not function properly depending on the
reception condition.
After the 1 button on the unit or remote control is pressed
for the first time to power on the unit
, the Auto Set Up
function sets the tuner channels, clock and Guide Program
numbers automatically.
Before starting, make sure of the following:
The TV aerial cable should be connected to the unit.
The unit’s mains power cord should be connected to a
mains outlet.
The TV should be set to its AV mode (with AV connection
pg. 11) or UHF channel 52 (with RF connection
pg. 11).
Slide the TV/VCR/DVD switch on the remote control to the
right.
Press rt to move the
highlight bar (pointer) to
AUTO SET” and press
ENTER or e.
When selecting “AUTO SET,”
Auto” also appears on the
front display panel.
Slide to the
right.
While Auto Set Up is in progress, do NOT press any
button on the unit or remote control until the front
display panel shows either the display as illustrated in
step C or “– –:– ” as illustrated on page 14.
The AUTO SET screen will
appear on the TV screen. As
Auto Set Up progresses, the
q” mark on the TV screen
moves from left to right.
A
TTENTION
Once you have performed Auto Set Up, even if the unit’s
memory backup has expired, all the stored stations and their
Guide Program numbers remain in the unit’s memory and
the unit will not perform Auto Set Up again. The unit
performs only Auto Clock Set when the unit is turned on.
If you have moved to a different area, perform each setting as
required.
Video channel setting (for RF connection users)
pg. 64
Tuner setting
pg. 59
Clock setting
pg. 65
If a new station starts broadcasting in your area, perform
tuner setting (
pg. 59) and, if necessary, video channel
setting (
pg. 64).
After “Auto Set Up” is completed, perform “Initial Set
Up for DVD Deck” on page 15.
Beginning End
XV48EK_01.book Page 12 Thursday, November 18, 2004 10:45 PM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC hr xv48ex at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC hr xv48ex in the language / languages: English, German as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info