7356
45
Zoom out
Zoom in
Previous page
1/64
Next page
EN 45
Enable remote pause function
On the front panel:
Press CH 5∞ to move
the highlight bar (arrow)
to AV COMPU-LINK,
then press OK to set it to
OFF.
On the Remote:
Press SHUTTLE PLUS
%fi to move the
highlight bar (arrow) to
AV COMPU-LINK,
then press OK or
SHUTTLE PLUS
#
to set
it to OFF.
The REMOTE PAUSE/
AV COMPU-LINK
connector works as the AV Compulink
connector when AV COMPU-LINK is set to
ON ( pg. 38 and 41), and works as the
Remote Pause connector when AV COMPU-
LINK is set to OFF.
Return to normal screen
Press MENU.
Start playback
Press PLAY ( 3 ) on the camcorder.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set it to OFF before starting
playback.
Start recording
On the front panel:
Press REC ( ).
On the Remote:
Press REC ( ) and PLAY ( 3 ) at the same time.
If you are using a Master Edit Control-equipped
JVC camcorder, recording starts automatically
on this VCR. (Refer to camcorders instruction
manual.)
NOTE:
Be sure to select AUTO for PICTURE CONTROL (or
NORM when VIDEO CALIBRATION is set to OFF) after
you finish dubbing the tapes (
pg. 38 and 39).
PREVIOUS PAGE
BLUE BACK ON
2ND AUDIO RECORD OFF
AUDIO MONITOR HI-FI
=
AV COMPU-LINK OFF
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
FUNCTION
=
VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
VIDEO STABILIZER OFF
NEXT PAGE
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
You can use a camcorder as the playback VCR and your
VCR as the recording VCR
Make connections
Connect an audio/video cable between the
camcorders audio/video output connectors and
your VCRs video audio/video input connectors.
When the JVC camcorder is equipped with the
Master Edit Control, you can control the VCR
from the camcorder. Connect the mini-plug
cable (not supplied with this VCR) as illustrated
to the left.
When using a camcorder with a monaural
output, connect the audio output connector on
the camcorder to the left audio input connector
on this VCR.
Load a cassette
Insert the cassette to be recorded on into this
VCR (for recording).
Select input mode on this VCR
Select L-1 when connecting the camcorder
to the audio/video input
connectors on the rear panel.
Select F-1 when connecting the camcorder
to the audio/video input
connectors on the front panel.
On the front panel:
Press CH 5∞.
On the Remote:
Press the Number key "0 (AUX)" or CH +/.
Access Main Menu screen on this VCR
Press MENU.
Access Function Set screen
On the front panel:
Press CH 5∞ to move the highlight bar (arrow) to
FUNCTION SET, then press OK.
On the Remote:
Press SHUTTLE PLUS %fi to move the highlight
bar (arrow) to FUNCTION SET, then press OK
or SHUTTLE PLUS
#
.
Select “EDIT” for Picture Control
Follow the procedure described on pages 38 and
39.
If your camcorder is a JVC Master Edit Control-
equipped type go to step .
If your camcorder is NOT a JVC Master Edit
Control-equipped type go to step .
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-VP78U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-VP78U in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info